Opinions please, I have a bubba'd 1903 Springfield

[quarterstaff]

and I was thinking a 400 Whelen(Petrov) would be fun, some background on the 1903; cut down stock, rear sight missing and rear sight base ground smooth, williams peep sight installed, barrel matches receiver, it is a post WWI rifle, bore is good.

  Anyway just wanted to get some opinions before I make up my mind.

Thanks

[jay.sharkbait]

and I was thinking a 400 Whelen(Petrov) would be fun, some background on the 1903; cut down stock, rear sight missing and rear sight base ground smooth, williams peep sight installed, barrel matches receiver, it is a post WWI rifle, bore is good.

  Anyway just wanted to get some opinions before I make up my mind.

Thanks

That little shoulder gives me the creeps, but it's been around for years with no issues.

35 Whelen in a 1903 is a classic sporter too.

[Blacktail Sniper]

If you have not already, make sure the receiver is not one of the weak, potentially dangerous ones.

A little background info on them:

http://m1903.com/03rcvrfail/

[jay.sharkbait]

If you have not already, make sure the receiver is not one of the weak, potentially dangerous ones.

A little background info on them:

http://m1903.com/03rcvrfail/

There were some cast commercial receivers done post war and those are a little questionable but are easy to ID. The other failures I always thought were suspect and over hyped.

[quarterstaff]

If you have not already, make sure the receiver is not one of the weak, potentially dangerous ones.

A little background info on them:

http://m1903.com/03rcvrfail/

Thanks for the info, That was one of the things I checked prior to buying the rifle.

[JJB11B]

6mm-338

[quarterstaff]

6mm-338

  Whole lotta work to get a 1903 to feed that fat case and I'd rather burn Savage barrels out than 1903's alot less work to swap em

[724wd]

308 Norma mag?  .35 Whelen would be sweet, too. 

I have a Win 1917 that will someday hopefully see a .404 Jeffery barrel

[quarterstaff]

308 Norma mag?  .35 Whelen would be sweet, too. 

I have a Win 1917 that will someday hopefully see a .404 Jeffery barrel

WOW I thought I was the only guy that lusted after a 404, I have a P-14 action but was told it would not take the 404 Jeffery

[jay.sharkbait]

308 Norma mag?  .35 Whelen would be sweet, too. 

I have a Win 1917 that will someday hopefully see a .404 Jeffery barrel

WOW I thought I was the only guy that lusted after a 404, I have a P-14 action but was told it would not take the 404 Jeffery

P14 were designed to feed rimmed cartridges.(303) P17's can take pretty much whatever you throw at them. Dad and I have done .375 and .450 Ackley Magnums on them.

[quarterstaff]

308 Norma mag?  .35 Whelen would be sweet, too. 

I have a Win 1917 that will someday hopefully see a .404 Jeffery barrel

WOW I thought I was the only guy that lusted after a 404, I have a P-14 action but was told it would not take the 404 Jeffery

P14 were designed to feed rimmed cartridges.(303) P17's can take pretty much whatever you throw at them. Dad and I have done .375 and .450 Ackley Magnums on them.

Nice!

[quarterstaff]

I would like to thank everybody that chimed in, some great ideas and nobody seems to think I am desecrating an Icon by converting it.

[Bill W]

Only if it's as issued. In addition to a couple "as issued" rifles I also have two that were sporterized by the previous owner.  One is an excellent shooter.

[JJB11B]

Neck 8mm Mauser down to 6.5

[quarterstaff]

Well I talked to Jesse at JES reboring and he says that he doesn't do the 400 Whelen so that leaves either the 35 or 375 Whelen. either way I will be sending my rifle to him soonest.

[quarterstaff]

Got my rifle back today, I went with 375 Whelen and now I just have to wait for the dies I have on back order with CH4D. I have 50 rds of new Remington 35 Whelen brass and an expander die so at least I can get a little bit of a start.

[Boss .300 winmag]

We need pics. 

[jay.sharkbait]

Got my rifle back today, I went with 375 Whelen and now I just have to wait for the dies I have on back order with CH4D. I have 50 rds of new Remington 35 Whelen brass and an expander die so at least I can get a little bit of a start.

That was quick!

[j_h_nimrod]

I have a .375 Gibbs on a Mauser action and love it!  Fun gun, will be a great brush hunter.

Just on a side note the P14 action will take up to the .577 Tyranasaur if you can find a smith to do it. I have a couple around for something different one of these days.

[quarterstaff]

Got my rifle back today, I went with 375 Whelen and now I just have to wait for the dies I have on back order with CH4D. I have 50 rds of new Remington 35 Whelen brass and an expander die so at least I can get a little bit of a start.

That was quick!

Yeah That was one of the things that attracted me to JES Reboring, lots of great reviews, great price and and fast turnaround.

[quarterstaff]

I have a .375 Gibbs on a Mauser action and love it!  Fun gun, will be a great brush hunter.

Just on a side note the P14 action will take up to the .577 Tyranasaur if you can find a smith to do it. I have a couple around for something different one of these days.

As fun as that would be I have my heart set on a classic British safari caliber, I probably will never see Africa but I have three boys so.....

[quarterstaff]

We need pics. 

As soon as I can post a target pic, you bet