collapse

Advertisement


« previous next »
Pages: 1 2 3 [4] 5 6   Go Down

Author Topic: First Attempt - Maple Self Bow  (Read 32275 times)

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #45 on: March 04, 2009, 05:17:36 PM »
Got to about the 98th percent done phase today. Will post pics later this evening. in a nutshell i took off too much on the upper limb. The bow shoots well but it might not be destined to live for more than a few years due to that. At some point it was pulling around 63-64 lbs at full draw. It should be lighter than that when it's complete. Just not sure how light.

I worked out a handle, sanded it down, Jay helped me glue on some horned tips, etc. Just need to apply leather handle and put some tru oil on it.
Logged

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 11921
  • Location: Southeast WA
  • Semper Primus
Re: First Attempt - Maple Self Bow
« Reply #46 on: March 04, 2009, 05:34:23 PM »
Can't wait to see it.  I've got this "thrill running up my leg" just hearing about it... :chuckle:
Logged
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #47 on: March 04, 2009, 08:47:40 PM »
I have some polishing to do on the ends where the overlays are. I am going to start putting some tru oil on it tomorrow night after working it over with some steel wool.

This is pretty close to done. Primitive bow...















Logged

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 11921
  • Location: Southeast WA
  • Semper Primus
Re: First Attempt - Maple Self Bow
« Reply #48 on: March 04, 2009, 09:51:53 PM »
Nice!  I dig the bone tips. 8)  Did that on my son's bow too.
Logged
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #49 on: March 04, 2009, 10:18:09 PM »
Let's see your son's bow.  :hello:
Logged

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50475
  • Location: Selah, Washington
Re: First Attempt - Maple Self Bow
« Reply #50 on: March 05, 2009, 06:21:26 AM »
Its fun to watch it all come together.  Thanks for keeping us posted with pics. 
Logged

Offline lazydrifter

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Nov 2008
  • Posts: 736
  • Location: Port Angeles
Re: First Attempt - Maple Self Bow
« Reply #51 on: March 05, 2009, 07:12:07 AM »
what kind of epoxy did you use for the bone tips?  Would gorilla glue work for this?  Looks really nice.
Logged

Offline fc2038

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2008
  • Posts: 1217
  • Location: Eatonville, Wa.
Re: First Attempt - Maple Self Bow
« Reply #52 on: March 05, 2009, 07:54:05 AM »
lookin good!!!
Logged

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #53 on: March 05, 2009, 09:16:02 AM »
lazydrifter,

I can't remember what we used for gluing on the tips. I'll ask. It certainly was not gorilla glue. Since I have never built a bow before I cannot comment if gorilla glue would be adequate.
Logged

Offline bow4elk

  • Pacific Northwest Bowhunting
  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 3413
  • Location: Olympia, WA
  • Contact me at: tom@pnwbowhunting.com
    • https://www.facebook.com/pacific.northwest.bowhunting/
    • Pacific Northwest Bowhunting
Re: First Attempt - Maple Self Bow
« Reply #54 on: March 05, 2009, 09:26:01 AM »
Quote from: Ray on March 05, 2009, 09:16:02 AM
lazydrifter,

I can't remember what we used for gluing on the tips. I'll ask. It certainly was not gorilla glue. Since I have never built a bow before I cannot comment if gorilla glue would be adequate.

No, gorilla glue is not recommended.  Bowgrip 100 epoxy is good stuff.
Logged
Official Measurer: Pope and Young Club, NW Big Game Inc., National Muzzle Loading Rifle Association, Oregon Shed Hunters
First Hunt Foundation mentor
Washington State R3 Coordinator

Pacific Northwest Bowhunting http://www.pnwbowhunting.com

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 11921
  • Location: Southeast WA
  • Semper Primus
Re: First Attempt - Maple Self Bow
« Reply #55 on: March 05, 2009, 06:45:58 PM »
Quote from: Ray on March 04, 2009, 10:18:09 PM
Let's see your son's bow.  :hello:

I have been meaning to take some pics of it.  I'll try to remember when I get home tonight.
Logged
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline bucklucky

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 9541
  • Location: Skookumchuck Wa.
    • Charlie Smith
Re: First Attempt - Maple Self Bow
« Reply #56 on: March 05, 2009, 08:14:45 PM »
Getting closer!!!! Nice!
Logged

Offline robb92

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 3685
  • Location: Spokane Wa, Andrews AFB, Maryland and King George, VA
Re: First Attempt - Maple Self Bow
« Reply #57 on: March 05, 2009, 08:25:34 PM »
Very cool, thanks for posting the pics!!!!!
Logged
"ITS NOT WHAT THE WISE MAN SAYS BUT WHAT THE WISE MAN DOES IN HIS LIFE THAT MATTERS"

Offline PacificNWhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Sep 2007
  • Posts: 3601
  • Location: Bonney Lake
Re: First Attempt - Maple Self Bow
« Reply #58 on: March 06, 2009, 08:05:24 AM »
Way cool, thanks for all the pic's and updates
Logged

Offline tlbradford

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 3518
  • Location: Veradale
Re: First Attempt - Maple Self Bow
« Reply #59 on: March 06, 2009, 08:28:34 AM »
What a great project.  It is looking awesome.  When you removed too much material on the upper limb, can you take off material from the lower limb and just have a lower draw weight?  Or is it in an area that needs a minimum amount of wood, I am guessing closer to the riser?

Looking forward to seeing the final results.  Thanks for the updates and pictures.

Logged
Dreams are forever on the mind, realization in the hands.
Pages: 1 2 3 [4] 5 6   Go Up
« previous next »
 


* Advertisement

Quick Links

* Recent Topics

11th Annual 'Pull For Scouting' Clay Crushing Classic by high_hunter
[Today at 12:27:18 AM]
AKC lab puppies! Born 06/10/2025 follow as they grow!!! by high_hunter
[Today at 12:21:33 AM]
Ritzville Rifle Buck - GMU 284 by high_hunter
[Yesterday at 11:49:16 PM]
Antlerless Moose more than once? by shootem
[Yesterday at 11:25:51 PM]
Nooksack Muzzleloader Bull Tag by high_hunter
[Yesterday at 10:42:24 PM]
2025 Draw Results by kramman
[Yesterday at 10:27:20 PM]
My wife drew quality deer DESERT rifle 10/18-10/26!!!!! by high_hunter
[Yesterday at 10:17:15 PM]
Palouse buck deer by blumtnelkndeer
[Yesterday at 10:14:00 PM]
Drew Quality by Jimmer
[Yesterday at 09:34:00 PM]
Nevada guide draw Mule Deer by Beastmonger1987
[Yesterday at 09:33:34 PM]
Quality Swakane by Rainier10
[Yesterday at 09:09:17 PM]
Son drawn - Silver Dollar Youth Any Elk - Help? by VickGar
[Yesterday at 09:06:22 PM]
Observatory quality bull rifle by buglebuster
[Yesterday at 09:00:02 PM]
Anterless 1334 muzzle loader by Bdawg
[Yesterday at 08:46:31 PM]
A little Martini Cadet varmint rifle I have been working on by JDHasty
[Yesterday at 08:43:33 PM]
Pogue Quality by geauxtigers
[Yesterday at 08:38:35 PM]
Bow mount trolling motors by Happy Gilmore
[Yesterday at 08:06:18 PM]
2025 OILS! by HUNTNORTHWEST
[Yesterday at 07:46:27 PM]
A question for any FFL holders on here by Knocker of rocks
[Yesterday at 07:34:49 PM]
Last year putting in… by MADMAX
[Yesterday at 07:25:41 PM]
SimplePortal 2.3.7 © 2008-2025, SimplePortal