collapse

Advertisement


Author Topic: 308 hand loaders  (Read 3591 times)

Offline Duckslayer89

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Oct 2014
  • Posts: 4142
  • Location: Cut Bank, Montana
308 hand loaders
« on: January 15, 2017, 06:41:56 PM »
Curious as to what you guys get for muzzle velocity. Today I was shooting Nosler Trophy Grade accubonds 165 grain factory ammo through my chronograph for the first time and was getting a 2520 reading at cold bore. 2570 for the second shot directly after the cold bore shot. I got 2520 on both cold bore shots though.

Offline Buzz2401

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1207
  • Location: Shelton
Re: 308 hand loaders
« Reply #1 on: January 15, 2017, 06:57:07 PM »
That's not that far off.  You can load faster but fast doesn't always equal accurate.  What was your barrel length.  I get 2600 out of my wifes gun but it has a 22" barrel.  You could probably get 2800 out of a max load and a 24-26'' barrel.

Offline Buzz2401

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1207
  • Location: Shelton
Re: 308 hand loaders
« Reply #2 on: January 15, 2017, 06:59:37 PM »
Just looked up some different data and actually looks like you could approach 3000fps with right combination.  But Ill take a accurate load over a fast load any day of the week.

Offline jay.sharkbait

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Jun 2013
  • Posts: 6507
Re: 308 hand loaders
« Reply #3 on: January 15, 2017, 07:25:34 PM »
That's about what I've seen from a 18" barreled OBR using published load data.

I've never seen anything close to 3000 fps except with 155's in a Palma rifle.


Offline Duckslayer89

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Oct 2014
  • Posts: 4142
  • Location: Cut Bank, Montana
Re: 308 hand loaders
« Reply #4 on: January 15, 2017, 08:00:15 PM »
I'm shooting a 22 inch barrel with factory muzzle break. Are you hand loading buzz?

Offline Duckslayer89

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Oct 2014
  • Posts: 4142
  • Location: Cut Bank, Montana
Re: 308 hand loaders
« Reply #5 on: January 15, 2017, 08:04:20 PM »
I was pretty impressed with my 338 RCM though pushing a 225 grain bullet at 2670 from a 20 inch barrel. Pretty good ballistics from that through the calculator. Going to check out my 7mm rem mag next

Offline 300rum

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 2357
Re: 308 hand loaders
« Reply #6 on: January 16, 2017, 08:43:41 PM »
I get 2650 out of 168 FGMM, 24" barrel.

Offline Buzz2401

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1207
  • Location: Shelton
Re: 308 hand loaders
« Reply #7 on: January 17, 2017, 10:23:17 PM »
That's about what I've seen from a 18" barreled OBR using published load data.

I've never seen anything close to 3000 fps except with 155's in a Palma rifle.

Me either just seen some supposed load data that said 3000fps.


Yes I strictly reload except 22LR.

Offline h20hunter

  • Trade Count: (+16)
  • Legend
  • ******
  • Join Date: Jan 2010
  • Posts: 20872
  • Location: Lake Stevens
Re: 308 hand loaders
« Reply #8 on: January 28, 2017, 07:06:23 PM »
Here is a bit of load data for you.

Gun is a 308 AR, 18 inch Ballistics Advantage pipe, 1 in 10

You can find the gun in the same section, look for hunting AR thread


165 gr accubond


45.0 gr Varget
2675
2647
2645
2658
2644

45.5 gr varget
2701
2668
2684
2674
2680

Both loads were shooting same POI, neither grouped better than the other. Average I would say best group went to the 45.0 gr. I use a Dillon 550 then hand adjust the powder per charge.

Offline Wenatcheejay

  • Past Sponsor
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Sep 2008
  • Posts: 4723
Re: 308 hand loaders
« Reply #9 on: January 29, 2017, 01:14:22 PM »
165gr sst Hornaday with 44gr varget is 2670 avg. (For me.)

Sent from my SM-G928V using Tapatalk

MAKE AMERICA GREAT AGAIN.

Offline hawgwild

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jan 2017
  • Posts: 18
  • Location: GMU 130
  • Groups: NRA, WA ANG
Re: 308 hand loaders
« Reply #10 on: February 05, 2017, 09:31:29 PM »
165gr sst Hornaday with 44gr varget is 2670 avg. (For me.)

Sent from my SM-G928V using Tapatalk

Barrel length?

 


* Advertisement

* Recent Topics

Toutle Quality Bull - Rifle by RB
[Today at 03:13:07 AM]


Norway pass Elk by Dark2Dark
[Yesterday at 11:51:46 PM]


Bear behavior by lewy
[Yesterday at 11:51:23 PM]


FFL preferences or warnings in Olympia or south Sound area? by Platensek-po
[Yesterday at 11:39:03 PM]


Boat registration by Happy Gilmore
[Yesterday at 10:22:29 PM]


Norway Pass Archery Elk 2025 by Boss .300 winmag
[Yesterday at 09:14:45 PM]


Entiat Quality tag by WAcoueshunter
[Yesterday at 09:05:06 PM]


Idaho 2025 Controlled Hunts by JDArms1240
[Yesterday at 09:03:40 PM]


Palouse/Mica (GMU 127) Access for Trades Work by dr.derek
[Yesterday at 08:29:53 PM]


Pearygin Quality by MADMAX
[Yesterday at 07:55:09 PM]


Teanaway bull elk by Caveman123
[Yesterday at 07:43:44 PM]


Oregon results posted. by Caveman123
[Yesterday at 07:40:47 PM]


2025 Draw Results by Yeti419
[Yesterday at 07:27:32 PM]


Mudflow Archery by Yeti419
[Yesterday at 07:26:25 PM]


Cowiche Quality Buck by dilleytech
[Yesterday at 07:14:35 PM]


Rehome for GWP by Feathernfurr
[Yesterday at 06:43:07 PM]


Vashon Island deer tag by bowhunter_1
[Yesterday at 04:32:43 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal