collapse

Advertisement


Author Topic: 6.5 Creedmoore & 143 gr ELD-X question  (Read 3756 times)

Offline TVHunts

  • Past Sponsor
  • Trade Count: (+58)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1091
  • Location: North Idaho
  • Groups: NRA-RSO,RMEF,DU
6.5 Creedmoore & 143 gr ELD-X question
« on: July 16, 2017, 04:14:51 PM »
Curious where most guys are finding their accuracy using node using H-4350, 143 grain ELD-X .  I used Federal LR Match primers, nosler brass.  The rifle is a Bergara
B-14. 

I started at 38.5 grains and worked up to 42 grains which is a 1/2 over published data Hornady  They are seated .039 off the lands in this ladder test.  Here is what I got

39 grains I had 2 bullets touching and one flyer for. 1.18" group (me ? )
39.5 Grs. 2 touching and one flyer for a 1.23" group. ( me? )
41 grs I had a .76" group
41.5 grs was a 1.02" group. 

So, curious how far off the lands others are getting good results with and also powder charges.

Any help would be great!
« Last Edit: July 16, 2017, 04:23:49 PM by TVHunts »
MAGA

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3306
  • Location: Yelm
  • Preferred pronouns: were/was
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #1 on: July 16, 2017, 05:12:21 PM »
Do you know your velocity? I don't shoot a Creedmoor but I run that bullet in a 6.5x47 Lapua and I got the best accuracy right around 2740 fps with 38.7gr of H4350 from a 30" barrel. 2725-2760 fps seems to be a good mid velocity accuracy node with 140gr bullets in the 6.5mm.

Offline TVHunts

  • Past Sponsor
  • Trade Count: (+58)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1091
  • Location: North Idaho
  • Groups: NRA-RSO,RMEF,DU
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #2 on: July 16, 2017, 05:17:10 PM »
I do not know my velocity. I usually don't take the time to Chrono until I get something that is working for me.  But, that maybe some help. 
MAGA

Offline Tikka300wsm

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: May 2013
  • Posts: 69
  • Location: Whatcom County
  • Groups: NRA RMEF
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #3 on: July 16, 2017, 05:36:12 PM »
Hornady Precision Hunter factory ammo has an OAL of 2.81. Not sure what that is off the lands in my rifle though. Shoots a ragged hole at 100 yards and less than an inch at 200 yards out of my Ruger Predator. I don't plan on handloading anymore if it keeps this up.

Offline TVHunts

  • Past Sponsor
  • Trade Count: (+58)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1091
  • Location: North Idaho
  • Groups: NRA-RSO,RMEF,DU
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #4 on: July 16, 2017, 06:11:45 PM »
Factory, SAAMI OAL usually has a huge bullet jump, not that it is wrong as you have found out.  Some factory rifles you have no choice as the Mag length prohibits anything longer.  Thanks for your input, I appreciate it.
MAGA

Offline CaNINE

  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jul 2015
  • Posts: 1440
  • Location: Gig Harbor
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #5 on: July 17, 2017, 11:29:22 AM »
I just picked up a Savage 12 in 6.5CM with a 26" 1:8 twist.  I'm going to test the 143 ELD-X, 140 VLD and 130 AR Hybrid all with H4350.  I'll let you know what shakes out.
The lazy do not roast any game, but the diligent feed on the riches of the hunt.

Proverbs 12:27

Offline TVHunts

  • Past Sponsor
  • Trade Count: (+58)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1091
  • Location: North Idaho
  • Groups: NRA-RSO,RMEF,DU
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #6 on: July 17, 2017, 06:14:08 PM »
I just picked up a Savage 12 in 6.5CM with a 26" 1:8 twist.  I'm going to test the 143 ELD-X, 140 VLD and 130 AR Hybrid all with H4350.  I'll let you know what shakes out.

Sounds great, I am thinking of trying a different bullet as well.  I'll try my 3 best results and see if I can repeat them.
MAGA

Offline highside74

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Old Salt
  • ******
  • Join Date: Oct 2009
  • Posts: 5513
  • Location: Eatonville wa
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #7 on: July 17, 2017, 06:45:37 PM »
I just picked up a Savage 12 in 6.5CM with a 26" 1:8 twist.  I'm going to test the 143 ELD-X, 140 VLD and 130 AR Hybrid all with H4350.  I'll let you know what shakes out.

I just waiting for my scope to come in so I can shoot my new Hells Canyon Speed 6.5 creedmoor. Those are loads that I want to try. I'll pay you for some.

 


* Advertisement

* Recent Topics

Mercedes Class C motorhome? by Threewolves
[Today at 11:46:01 AM]


Ram front bumpers by Sandberm
[Today at 11:11:12 AM]


American Legion Post #14 Winter/Spring Raffle by pianoman9701
[Today at 11:03:57 AM]


Muzzy needs by BA Mongor
[Today at 10:53:42 AM]


Inability to Post Pics by Rainier10
[Today at 10:39:59 AM]


Archery Shops in Lacey/Oly? by pianoman9701
[Today at 10:09:25 AM]


Baiting Cougars? by WoolyRunner
[Today at 10:00:13 AM]


Wyoming 2026, who's in? by Mtnwalker
[Today at 09:34:56 AM]


Got a lion today by WoolyRunner
[Today at 09:14:31 AM]


Dorsal skinned beaver by Jake Dogfish
[Today at 04:22:49 AM]


Skunks by Loup Loup
[Yesterday at 07:54:15 PM]


Catch photo trap action by Loup Loup
[Yesterday at 07:51:57 PM]


Hunting buddies by Tatze
[Yesterday at 06:33:49 PM]


North Forty Will Start Selling Suppressors by Boss .300 winmag
[Yesterday at 05:06:50 PM]


Oak Creek Feed Station by MADMAX
[Yesterday at 03:38:35 PM]


Old shotgun shells by Ridgeratt
[Yesterday at 03:08:41 PM]


Winthrop has a turkey problem by MADMAX
[Yesterday at 02:27:06 PM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal