collapse

Advertisement


Author Topic: 6.5 Creedmoore & 143 gr ELD-X question  (Read 3741 times)

Offline TVHunts

  • Past Sponsor
  • Trade Count: (+58)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1091
  • Location: North Idaho
  • Groups: NRA-RSO,RMEF,DU
6.5 Creedmoore & 143 gr ELD-X question
« on: July 16, 2017, 04:14:51 PM »
Curious where most guys are finding their accuracy using node using H-4350, 143 grain ELD-X .  I used Federal LR Match primers, nosler brass.  The rifle is a Bergara
B-14. 

I started at 38.5 grains and worked up to 42 grains which is a 1/2 over published data Hornady  They are seated .039 off the lands in this ladder test.  Here is what I got

39 grains I had 2 bullets touching and one flyer for. 1.18" group (me ? )
39.5 Grs. 2 touching and one flyer for a 1.23" group. ( me? )
41 grs I had a .76" group
41.5 grs was a 1.02" group. 

So, curious how far off the lands others are getting good results with and also powder charges.

Any help would be great!
« Last Edit: July 16, 2017, 04:23:49 PM by TVHunts »
MAGA

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3306
  • Location: Yelm
  • Preferred pronouns: were/was
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #1 on: July 16, 2017, 05:12:21 PM »
Do you know your velocity? I don't shoot a Creedmoor but I run that bullet in a 6.5x47 Lapua and I got the best accuracy right around 2740 fps with 38.7gr of H4350 from a 30" barrel. 2725-2760 fps seems to be a good mid velocity accuracy node with 140gr bullets in the 6.5mm.

Offline TVHunts

  • Past Sponsor
  • Trade Count: (+58)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1091
  • Location: North Idaho
  • Groups: NRA-RSO,RMEF,DU
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #2 on: July 16, 2017, 05:17:10 PM »
I do not know my velocity. I usually don't take the time to Chrono until I get something that is working for me.  But, that maybe some help. 
MAGA

Offline Tikka300wsm

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: May 2013
  • Posts: 69
  • Location: Whatcom County
  • Groups: NRA RMEF
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #3 on: July 16, 2017, 05:36:12 PM »
Hornady Precision Hunter factory ammo has an OAL of 2.81. Not sure what that is off the lands in my rifle though. Shoots a ragged hole at 100 yards and less than an inch at 200 yards out of my Ruger Predator. I don't plan on handloading anymore if it keeps this up.

Offline TVHunts

  • Past Sponsor
  • Trade Count: (+58)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1091
  • Location: North Idaho
  • Groups: NRA-RSO,RMEF,DU
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #4 on: July 16, 2017, 06:11:45 PM »
Factory, SAAMI OAL usually has a huge bullet jump, not that it is wrong as you have found out.  Some factory rifles you have no choice as the Mag length prohibits anything longer.  Thanks for your input, I appreciate it.
MAGA

Offline CaNINE

  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jul 2015
  • Posts: 1437
  • Location: Gig Harbor
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #5 on: July 17, 2017, 11:29:22 AM »
I just picked up a Savage 12 in 6.5CM with a 26" 1:8 twist.  I'm going to test the 143 ELD-X, 140 VLD and 130 AR Hybrid all with H4350.  I'll let you know what shakes out.
The lazy do not roast any game, but the diligent feed on the riches of the hunt.

Proverbs 12:27

Offline TVHunts

  • Past Sponsor
  • Trade Count: (+58)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1091
  • Location: North Idaho
  • Groups: NRA-RSO,RMEF,DU
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #6 on: July 17, 2017, 06:14:08 PM »
I just picked up a Savage 12 in 6.5CM with a 26" 1:8 twist.  I'm going to test the 143 ELD-X, 140 VLD and 130 AR Hybrid all with H4350.  I'll let you know what shakes out.

Sounds great, I am thinking of trying a different bullet as well.  I'll try my 3 best results and see if I can repeat them.
MAGA

Offline highside74

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Old Salt
  • ******
  • Join Date: Oct 2009
  • Posts: 5487
  • Location: Eatonville wa
Re: 6.5 Creedmoore & 143 gr ELD-X question
« Reply #7 on: July 17, 2017, 06:45:37 PM »
I just picked up a Savage 12 in 6.5CM with a 26" 1:8 twist.  I'm going to test the 143 ELD-X, 140 VLD and 130 AR Hybrid all with H4350.  I'll let you know what shakes out.

I just waiting for my scope to come in so I can shoot my new Hells Canyon Speed 6.5 creedmoor. Those are loads that I want to try. I'll pay you for some.

 


* Advertisement

* Recent Topics

Results of 3 point or better rule by boneaddict
[Today at 06:23:28 AM]


Custom Laminate Design Handcalls by rainshadow1
[Yesterday at 09:24:48 PM]


Another reloading newb question by jrebel
[Yesterday at 09:23:43 PM]


blacktail deer bait by kodiak06
[Yesterday at 09:09:21 PM]


Unique way to get a pair by MADMAX
[Yesterday at 08:26:14 PM]


NE Wolf documentary by Birdguy
[Yesterday at 07:40:46 PM]


Fencelines by Sitka_Blacktail
[Yesterday at 06:44:05 PM]


Bills to relocate Bib Oke and continue pheasant release programs by Torrent50
[Yesterday at 06:16:38 PM]


Please Report Problems & Bugs Here by Buckmark
[Yesterday at 05:16:23 PM]


First time coyote hunting by 762Gunner
[Yesterday at 05:11:22 PM]


Wishlist by String Bender
[Yesterday at 03:56:45 PM]


turkey hunting question series - question 2 by brokentrail
[Yesterday at 03:24:27 PM]


Alpine Lakes Bear Hunt Thoughts by chasethedevil
[Yesterday at 01:54:02 PM]


Wyoming 2026, who's in? by dvolmer
[Yesterday at 01:51:02 PM]


End of Western WA Pheasant Release Program by EnglishSetter
[Yesterday at 12:55:25 PM]


Boys coho catch fall ‘25 by AL WORRELLS KID
[Yesterday at 11:49:59 AM]


Family Hunt Club by EnglishSetter
[Yesterday at 10:35:07 AM]


Pheasant Release Program by WSU
[Yesterday at 09:24:22 AM]


Leopard Cur Pups by Machias
[Yesterday at 08:16:47 AM]


Is this 1903 Remington finish original? by swanderek
[Yesterday at 07:38:59 AM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal