collapse

Advertisement


Author Topic: Custom rifle info  (Read 4653 times)

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Re: Custom rifle info
« Reply #15 on: February 14, 2018, 08:06:11 PM »
You can spend as much as you want on something like this and it's easy to let the price get out of hand. My rifle is built on a used CheyTac model 310 action and Chassis that I picked up for $1500 for the set over on Long Range Hunting. These are the same as a Lawton Model 8000 and a McRee chassis made for CheyTac. The barrel is a 30" Bartlein 1-9.5" twist 1.3500" for 5" then taper to 1" at the muzzle that I picked up on sale (in stock right off the shelf) from Bullets.com on sale for about $350. The muzzle brake is a Terminator T4 that was $240; I love this brake but there are lots of really effective brakes that are less expensive. The trigger is a Jewell JT-09 and was about $200. Throw a couple hundred bucks on top to cover the gunsmithing fees and that's it.

If I were you, I'd decide how quickly you want to put the rifle together. I you're not in any rush, shop around and look for a good deal to pop up on a Stiller Tac 408 action. I've seen new ones go for under $1000. Same goes for stock if you're not too picky. I sold a spare McRee Big Bore repeater chassis for $400 a while back. Watch for somebody selling a quality 338 blank and you can save money and time. With a lot of guys moving over to the 375s these days you can find some good deals on 338 blanks.

Unless you plan to build a couple of rifles in this chambering don't bother buying a reamer. Between a rougher/resize reamer, finish reamer and headspace gauge you'll be into it $400+ just for reamers. You can rent a 338 SnipeTac reamer or hit me up when you're ready and I'll rent you my reamers. All the different variations of this case will perform pretty much the same so just pick whichever one is available and go with it. I found my reamers used for a good price and I planned on having a couple barrels cut so it made sense to just buy them.

Or, scrap the budget and just go all out! That's what I did when I built my matching SP! Nothing will run up the price of a build as fast as nice wood, a Bat action and a top name smith to "throw" it all together. :tup:

Offline CastleRocker

  • Trade Count: (+6)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1015
  • Location: Castle Rock, WA
Re: Custom rifle info
« Reply #16 on: February 14, 2018, 09:24:27 PM »
Wow, this sounds like an interesting project!  Please keep us posted as to how this progresses.

Yorktransport; Wow! Nice long range handgun!  I finally shot the barrel out of the 300WSM pistol I bought...going to go 7mmWSM this next go round.
Work to live, don't live to work.

You can educate away ignorance, sober up drunkenness, but you can't fix stupid.

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Custom rifle info
« Reply #17 on: February 14, 2018, 09:39:00 PM »
Yorke needs a serious course in sexy neck turning. Yorke redefines the term "Down and dirty" when it comes to neck turning!  :chuckle: :chuckle: :chuckle:

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Re: Custom rifle info
« Reply #18 on: February 14, 2018, 09:59:30 PM »
Yorke needs a serious course in sexy neck turning. Yorke redefines the term "Down and dirty" when it comes to neck turning!  :chuckle: :chuckle: :chuckle:

I neck turn with a Milwaukee impact gun and a cinder block.  :chuckle:

Offline W_Ellison2011

  • Non-Hunting Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: May 2011
  • Posts: 497
  • Location: Graham, Wa
Re: Custom rifle info
« Reply #19 on: February 15, 2018, 02:36:25 PM »
With those prices it is going to take me a bit more time... mainly in convincing my accountant.. aka the wife lol! Thank you for all the information. I really didn't want to blow up my savage 110 action doing something like this. Guess it is going to stick to being built into a custom 300 win mag only. The action and optics will be the expensive part. The barrel won't be bad. I can pick up a Krieger shipped for under $400 which will work perfectly for it. I will take my time and price everything out. I actually already found the same action mentioned for $900 including a 40 moa rail.

Offline W_Ellison2011

  • Non-Hunting Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: May 2011
  • Posts: 497
  • Location: Graham, Wa
Re: Custom rifle info
« Reply #20 on: February 15, 2018, 07:53:15 PM »
Yorke. My buddy and I live out in graham. I have a spot up above skate creek road that we shoot 1,000 yards, a mile, and then we found a spot that is over 2600. We need to get together and go shooting some time this summer! Would love to see that big 338/408 of yours really stretching out and maybe shoot it 1 or 2 times if you didn't mind.

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Re: Custom rifle info
« Reply #21 on: February 15, 2018, 08:27:09 PM »
Absolutely! I used to have a couple good shooting spots up around Skate Creek but I haven't been up that way for years. Now most of my really long spots are in the NF outside of Cinebar.

Offline W_Ellison2011

  • Non-Hunting Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: May 2011
  • Posts: 497
  • Location: Graham, Wa
Re: Custom rifle info
« Reply #22 on: February 15, 2018, 09:45:12 PM »
I know a few spots above cinebar but I haven't been up there in a long time. My folks live out in Onlaska lol!

 


* Advertisement

* Recent Topics

2025 Draw Results by addicted1
[Today at 07:52:38 PM]


2025 OILS! by HUNTNORTHWEST
[Today at 07:46:27 PM]


Palouse buck deer by Shooter4
[Today at 07:46:18 PM]


A question for any FFL holders on here by Knocker of rocks
[Today at 07:34:49 PM]


Last year putting in… by MADMAX
[Today at 07:25:41 PM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Today at 07:12:15 PM]


September mule deer velvet by NOCK NOCK
[Today at 07:10:12 PM]


Share your out of state experience by finnman
[Today at 06:53:04 PM]


Pogue Quality by DUCKDUDE
[Today at 06:47:59 PM]


B cake by Blacklab
[Today at 06:32:11 PM]


Son drawn - Silver Dollar Youth Any Elk - Help? by TC_outdoorsman
[Today at 06:13:09 PM]


Observatory quality bull rifle by mtndew
[Today at 05:40:32 PM]


Antlerless Moose more than once? by geauxtigers
[Today at 05:11:58 PM]


No Draw! Good luck! by TexasRed
[Today at 04:43:36 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Today at 04:37:37 PM]


SE raffle tags holder by trophyhunt
[Today at 04:26:02 PM]


New to Mule deer hunting where to start by bigmacc
[Today at 04:16:08 PM]


My wife drew quality deer DESERT rifle 10/18-10/26!!!!! by KNOPHISH
[Today at 03:43:32 PM]


Nooksack Muzzleloader Bull Tag by Bucks2Ducks
[Today at 03:16:01 PM]


Unknown Suppressors - Whisper Pickle by pickardjw
[Today at 03:08:51 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal