collapse

Advertisement


Author Topic: New Reamer Day!  (Read 5050 times)

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
New Reamer Day!
« on: April 09, 2018, 08:12:44 PM »
My 270 BoonDoggle (270/375 Ruger) reamer showed up today!


Now I just need to decide if I want to wait until my 1-7" twist barrel shows up before I use it, or maybe have a test barrel made up for one of my Savages. It's pretty easy to find 1-9" twist 270 barrels, but that would be borderline for stabilizing the 170gr Berger and no chance of stabilizing the 168gr Hammer Hunter.

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5602
Re: New Reamer Day!
« Reply #1 on: April 09, 2018, 08:27:08 PM »
So whats next ?  Ive never seen a reamer used.  Put barrel in lathe and reamer in stock end ?   Or just send to your fav smith ?

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Re: New Reamer Day!
« Reply #2 on: April 09, 2018, 08:37:26 PM »
So whats next ?  Ive never seen a reamer used.  Put barrel in lathe and reamer in stock end ?   Or just send to your fav smith ?

The right way to do it is send the reamer and a barrel blank off to somebody who knows what they're doing and have it all dialed in and done right on a lathe. I've been know to hand ream barrels while they're held in a bench vise though. :chuckle: I've rechamered a couple of 338 Win Mag barrels to 338/375 Ruger that way. I could probably track down a cheap 270 barrel for a Savage and do the same here. It takes a long time though!

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5602
Re: New Reamer Day!
« Reply #3 on: April 09, 2018, 09:28:53 PM »
 :) i was looking at that reamer and thinking it had a pilot on the end that might just work with a makita cordless if a guy was steady. 
Thx for sharing.   :tup:

Offline Reidus

  • Trade Count: (+15)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 877
  • Location: Tri-Cities
Re: New Reamer Day!
« Reply #4 on: April 09, 2018, 09:39:05 PM »
Looks like you got a lil freebore there for the longer bullets. Waiting Sucks!

who made the reamer?

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6539
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: New Reamer Day!
« Reply #5 on: April 10, 2018, 05:07:49 AM »
This cartrage is going to be sweet. Have you decided how you'll do your brass?
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline Wanttohuntmore

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1957
Re: New Reamer Day!
« Reply #6 on: April 10, 2018, 05:32:22 AM »
That would be sweet with the faster twist.   Might even work with the slower 1/9.

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3308
  • Location: Spokane Wa.
Re: New Reamer Day!
« Reply #7 on: April 10, 2018, 11:39:07 AM »
Don't you also need a variety of different pilot bushing sizes to accommodate for the varying bore diameters, it's not just a one size fits all is it?

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 51553
  • Location: E. WA
Re: New Reamer Day!
« Reply #8 on: April 10, 2018, 11:50:05 AM »

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8994
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: New Reamer Day!
« Reply #9 on: April 10, 2018, 12:18:03 PM »
.0002" increments  :o  dang
Kindly do not attempt to cloud the issue with too many facts.

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31527
  • Location: Goldendale,WA
Re: New Reamer Day!
« Reply #10 on: April 10, 2018, 12:39:50 PM »
That's a nice shop :drool:
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 51553
  • Location: E. WA
Re: New Reamer Day!
« Reply #11 on: April 10, 2018, 12:45:31 PM »
It is and my comment is really just a sarcastic way of saying the same thing.

I am ready for adoption.  Will sweep chips for machine time.

:tup:

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8994
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: New Reamer Day!
« Reply #12 on: April 10, 2018, 12:53:10 PM »
Incredible setup.  Shoot I wish I just had the bare minimum setup for chambering and threading blanks.  If I had a shop like that, I'd never leave  :tup:
Kindly do not attempt to cloud the issue with too many facts.

Offline N7XW

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Mar 2011
  • Posts: 1117
  • Location: Westport, WA
Re: New Reamer Day!
« Reply #13 on: April 10, 2018, 02:15:20 PM »
Tagging along on this one  :)

Offline Wanttohuntmore

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1957
Re: New Reamer Day!
« Reply #14 on: April 10, 2018, 06:17:39 PM »
Someone has to be in pa that would like to be mentored!  I could sit and watch, and have a great time.

 


* Advertisement

* Recent Topics

Bear behavior by dylan34_36
[Today at 08:51:28 AM]


Idaho Unit 31 Late Rifle! by Sliverslinger
[Today at 08:36:10 AM]


Getting back into dogs by brokentrail
[Today at 08:33:12 AM]


Bow mount trolling motors by GWP
[Today at 08:25:59 AM]


Idaho 2025 Controlled Hunts by Machias
[Today at 08:12:17 AM]


Stillaguamish 448 QD rifle tag by JakeLand
[Today at 08:07:31 AM]


Machias' 2025 Spring Bear/Northern Idaho by Machias
[Today at 07:52:44 AM]


Norway pass Elk by hunterednate
[Today at 07:44:13 AM]


Early controlled hunt rifle tag Lemhi Range by Shooter4
[Today at 07:29:56 AM]


FFL preferences or warnings in Olympia or south Sound area? by Sneaky
[Today at 05:43:56 AM]


Toutle Quality Bull - Rifle by RB
[Today at 03:13:07 AM]


Boat registration by Happy Gilmore
[Yesterday at 10:22:29 PM]


Norway Pass Archery Elk 2025 by Boss .300 winmag
[Yesterday at 09:14:45 PM]


Entiat Quality tag by WAcoueshunter
[Yesterday at 09:05:06 PM]


Palouse/Mica (GMU 127) Access for Trades Work by dr.derek
[Yesterday at 08:29:53 PM]


Pearygin Quality by MADMAX
[Yesterday at 07:55:09 PM]


Teanaway bull elk by Caveman123
[Yesterday at 07:43:44 PM]


Oregon results posted. by Caveman123
[Yesterday at 07:40:47 PM]


2025 Draw Results by Yeti419
[Yesterday at 07:27:32 PM]


Mudflow Archery by Yeti419
[Yesterday at 07:26:25 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal