collapse

Advertisement


Author Topic: Broadhead hitting a little high and right  (Read 3552 times)

Offline Nice Racks

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2013
  • Posts: 1123
  • Location: Spanaway, WA
  • Groups: McChord AFB Archery Club
Broadhead hitting a little high and right
« on: June 15, 2018, 12:36:48 PM »
Last year my broadheads were hitting a little high and about 6 inches to the right.  I adjusted my sights and was hitting ok then.  I recently seen on YouTube that the proper way to fix that problem is adjusting the rest, because it probably wasn't centered. My question is...which way is correct?  I shoot a 70# G5 Primal, 28" Carbon Express Red 350 spine arrow, and a 125 grain broadhead. I had my bow tuned up prior to last season, and they used a laser to center my QAD test.
« Last Edit: June 15, 2018, 01:04:40 PM by Nice Racks »

Offline hogslayer

  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Dec 2012
  • Posts: 818
  • Location: Snoqualmie-Belfair
  • Groups: Bloody decks
Re: Broadhead hitting a little high and right
« Reply #1 on: June 15, 2018, 12:50:10 PM »
First I would check some online calcualator and make sure your spine is correct. Adding weight to the end of the aarow weakens the spine. But I would move your rest left 1/16 of an inch.  Barely noticeable.  Keep and eye on your current notch as sometimes they can move fast when adjusting. Any shooting errors are magnified when shooting broad heads.

Offline Pegasus

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2017
  • Posts: 2117
  • Location: King County
Re: Broadhead hitting a little high and right
« Reply #2 on: June 15, 2018, 12:53:45 PM »
I would aim a little  low and to the left.

Offline Buckmark

  • Washington For Wildlife
  • Trade Count: (+16)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 5445
  • Location: GPS is searching
Re: Broadhead hitting a little high and right
« Reply #3 on: June 15, 2018, 12:57:16 PM »
Lots of smart archery guys on here @D-Rock425
I have always move the rest, move it in the direction you want the arrow to move, IE move it left a little and retry your shots
But im no expert....just what has worked for me

To hunt and butcher an animal is to recognize that meat is not some abstract form of protein that springs into existence tightly wrapped in cellophane and styrofoam.

Offline D-Rock425

  • Washington For Wildlife
  • Trade Count: (+12)
  • Explorer
  • ******
  • Join Date: Jun 2009
  • Posts: 13261
  • Location: Lake stevens
Re: Broadhead hitting a little high and right
« Reply #4 on: June 15, 2018, 01:00:11 PM »
Are they all hitting the same or is it just a couple odd arrows.

Offline Katmai Guy

  • Retired
  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Jul 2014
  • Posts: 1590
  • Location: Covington
Re: Broadhead hitting a little high and right
« Reply #5 on: June 15, 2018, 01:01:18 PM »
Paper tune to get perfect flight then move sight.
"Keep shootin, when there's lead in the air, there's hope"

Offline Nice Racks

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2013
  • Posts: 1123
  • Location: Spanaway, WA
  • Groups: McChord AFB Archery Club
Re: Broadhead hitting a little high and right
« Reply #6 on: June 15, 2018, 01:03:35 PM »
They are all hitting consistently high right.

Offline D-Rock425

  • Washington For Wildlife
  • Trade Count: (+12)
  • Explorer
  • ******
  • Join Date: Jun 2009
  • Posts: 13261
  • Location: Lake stevens
Re: Broadhead hitting a little high and right
« Reply #7 on: June 15, 2018, 01:06:37 PM »
I'd start with a paper tune but thats all it is is a start.  Than I'd do a French/walk back tune.  Than I'd be indexing and group tuning arrows.  Put some numbers on the arrows so you can eliminate and outliers.

Offline Nice Racks

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2013
  • Posts: 1123
  • Location: Spanaway, WA
  • Groups: McChord AFB Archery Club
Re: Broadhead hitting a little high and right
« Reply #8 on: June 15, 2018, 01:20:10 PM »
Would lowering my draw weight to like 65# help any?

Offline D-Rock425

  • Washington For Wildlife
  • Trade Count: (+12)
  • Explorer
  • ******
  • Join Date: Jun 2009
  • Posts: 13261
  • Location: Lake stevens
Re: Broadhead hitting a little high and right
« Reply #9 on: June 15, 2018, 01:21:48 PM »
I think your ok on arrow spine.

Offline Nice Racks

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2013
  • Posts: 1123
  • Location: Spanaway, WA
  • Groups: McChord AFB Archery Club
Re: Broadhead hitting a little high and right
« Reply #10 on: June 15, 2018, 01:25:21 PM »
I've had this issue with 2 different models of 125 heads, but the Wasp Boss Bullet was spot on out to 50 yards. I went with the 125s for a better FOC.

Offline D-Rock425

  • Washington For Wildlife
  • Trade Count: (+12)
  • Explorer
  • ******
  • Join Date: Jun 2009
  • Posts: 13261
  • Location: Lake stevens
Re: Broadhead hitting a little high and right
« Reply #11 on: June 15, 2018, 01:35:19 PM »
Try some radical archery designs heads

Offline Lucky1

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jan 2014
  • Posts: 3940
  • Location: Kelso
  • Groups: NRA. GOP
Re: Broadhead hitting a little high and right
« Reply #12 on: June 15, 2018, 02:22:44 PM »
I would aim a little  low and to the left.
Brilliant advice!  :chuckle:
Or, he could move the Sight pin up and to the right also. That might work.  :twocents:
Socialism
Is a philosophy of failure, the creed of ignorance, and the gospel of envy. It’s inherent value is the equal sharing of misery. - Winston Churchill

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12925
  • Location: Arlington
Re: Broadhead hitting a little high and right
« Reply #13 on: June 15, 2018, 03:46:17 PM »
I would aim a little  low and to the left.
Brilliant advice!  :chuckle:
Or, he could move the Sight pin up and to the right also. That might work.  :twocents:

Or, tune the bow.

Offline stickslinger

  • Non-Hunting Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2009
  • Posts: 106
  • Location: EASTERN WA
Re: Broadhead hitting a little high and right
« Reply #14 on: June 15, 2018, 08:14:15 PM »
Google bare shaft tuning and broadhead tuning.  You are correct about moving the rest
RELAX,PICK A SPOT,SHOOT STRAIGHT

 


* Advertisement

SimplePortal 2.3.7 © 2008-2025, SimplePortal