collapse

Advertisement


Author Topic: Bohning Blazer Fletching Jig....  (Read 3094 times)

Offline Lowedog

  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 2625
Bohning Blazer Fletching Jig....
« on: March 08, 2009, 08:37:29 PM »
Bought the Bohning fletching jig for 2" Blazer vanes and just thought I would share how well it works.  It puts a nice 3 degree helix on the Blazers and is super easy to use.  Vanes turned out looking and flying really sweet.




-Lowedog
"Ethical behavior is doing the right thing when no one else is watching- even when doing the wrong thing is legal."
— Aldo Leopold

Offline archery288

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Oct 2007
  • Posts: 2227
  • Location: Auburn
Re: Bohning Blazer Fletching Jig....
« Reply #1 on: March 08, 2009, 09:54:26 PM »
Nicely done!  What type of glue are you using on your blazers?

Offline Lowedog

  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 2625
Re: Bohning Blazer Fletching Jig....
« Reply #2 on: March 08, 2009, 10:18:45 PM »
I'm using Maxi-Cure cyanoacrylate.  It's really strong and sets up super fast.  I haven't lost a vane because of the glue failing in the 2 years I have been using it. 

-Mark
"Ethical behavior is doing the right thing when no one else is watching- even when doing the wrong thing is legal."
— Aldo Leopold

Offline firecrotch

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2008
  • Posts: 837
  • Location: Walla Walla WA
  • Team Deadfowl
Re: Bohning Blazer Fletching Jig....
« Reply #3 on: March 09, 2009, 12:18:08 AM »
are those cheetahs your shootin?

Offline Lowedog

  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 2625
Re: Bohning Blazer Fletching Jig....
« Reply #4 on: March 09, 2009, 04:29:48 AM »
are those cheetahs your shootin?

No, they are CX Maxima Hunters
"Ethical behavior is doing the right thing when no one else is watching- even when doing the wrong thing is legal."
— Aldo Leopold

Offline firecrotch

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2008
  • Posts: 837
  • Location: Walla Walla WA
  • Team Deadfowl
Re: Bohning Blazer Fletching Jig....
« Reply #5 on: March 09, 2009, 01:51:08 PM »
o ok well looks like a good setup i like it

Offline fc2038

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2008
  • Posts: 1218
  • Location: Eatonville, Wa.
Re: Bohning Blazer Fletching Jig....
« Reply #6 on: March 11, 2009, 06:43:10 PM »
Were did you get the jig? Looks like some nice work

Offline Ironhead

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Mar 2007
  • Posts: 1839
  • Location: Muddy Creek
Re: Bohning Blazer Fletching Jig....
« Reply #7 on: March 11, 2009, 07:22:18 PM »
Those look sweet Lowedog, I have been wanting to buy that jig.
"The problem with quotes on Internet Forums is, that it is often difficult to verify their authenticity." - Abraham Lincoln

Offline Lowedog

  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 2625
Re: Bohning Blazer Fletching Jig....
« Reply #8 on: March 12, 2009, 02:02:21 PM »
Were did you get the jig? Looks like some nice work

I got it off ebay.  There are several ebay stores selling them.

-Lowedog
"Ethical behavior is doing the right thing when no one else is watching- even when doing the wrong thing is legal."
— Aldo Leopold

Offline fc2038

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2008
  • Posts: 1218
  • Location: Eatonville, Wa.
Re: Bohning Blazer Fletching Jig....
« Reply #9 on: March 16, 2009, 06:58:18 PM »
Thanks for the info

Offline @RCHER

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Dec 2008
  • Posts: 246
  • Location: Bellevue, WA
Re: Bohning Blazer Fletching Jig....
« Reply #10 on: March 17, 2009, 02:35:15 PM »
Good post, LD. I'm ready for a change myself. I've been using the same AZ EZ Fletch for almost 20 years. It's okay, but now that I'm shooting carbons and 2" blazers, I'd like an updated setup. I'll be at Cabela's over the next couple weeks. I'll check it out.
May the morning silence be broken with the wisp of vanes trailing blades to their mark. 
->>============>

 


* Advertisement

* Recent Topics

Selkirk bull moose. by trophyhunt
[Today at 08:04:15 AM]


Looking for English Pointer pup (Elhew and/or Guard Rail lines) by Tafinder
[Today at 07:22:10 AM]


Steel Targets??? by rem700300
[Today at 06:54:16 AM]


Buying pheasants for training by trapp01
[Yesterday at 08:44:40 PM]


Mt. Spokane North Moose by Farmer72
[Yesterday at 08:12:24 PM]


Greenriver quality Elk permit by First timer
[Yesterday at 03:13:57 PM]


Bow mount trolling motors by Stein
[Yesterday at 09:05:06 AM]


Oregon results posted. by trophyhunt
[Yesterday at 08:51:12 AM]


best draw for moose unit wise by hunter399
[Yesterday at 08:31:10 AM]


Idaho 2025 Controlled Hunts by trophyelk6x6
[Yesterday at 08:24:13 AM]


2025 OILS! by Ridgerunner
[Yesterday at 07:40:49 AM]


FFL preferences or warnings in Olympia or south Sound area? by lhrbull
[Yesterday at 06:59:24 AM]


Nooksack Archery Tag by LongBomb
[Yesterday at 06:29:37 AM]


I’m on a blacktail mission by Turner89
[June 13, 2025, 11:33:35 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[June 13, 2025, 09:54:06 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal