collapse

Advertisement


Author Topic: Benchmark barrels  (Read 14485 times)

Offline Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4933
  • Location: Puyallup
Benchmark barrels
« on: October 17, 2018, 03:38:30 PM »
Looking for a little input.  Going to send my Rem 700 in 7mag to Benchmark.  Looks like they will blueprint the action, and barrel install for about $850.  I will have them also install a brake.  Any other work I should have them do?  Probably have the barrel fluted, not sure if they offer cerakote, but guessing they do not.  Looking for input on length and contour.  Its a hunting rifle so barrel so Im thinking 24-27 inch.  Most of my hunting is either mountain bike, or driving and glassing ridge to ridge.  Contour I know little about but they offer several different options so input there is appreciated if you know a little about their work. Which should I chose three or five groove, and a 1-9 twist?

Lastly,

Cerakote locations with decent turnaround
Decent stock to throw it into in the $500-$800 range

Thanks in advance.  This will give me something to do in the off season.


Online Wetwoodshunter

  • Non-Hunting Topics
  • Trade Count: (+8)
  • Sourdough
  • *****
  • Join Date: Dec 2014
  • Posts: 1313
  • Location: Sekiu & Goldendale, WA
Re: Benchmark barrels
« Reply #1 on: October 17, 2018, 03:46:28 PM »
http://madcustomcoating.com

I recently talked to my old gunsmith that went under with the new regulations but he sent stuff to these guys. They are in Bremmerton, WA and come highly recommended from him.

Offline Bob33

  • Global Moderator
  • Trade Count: (+3)
  • Legend
  • *****
  • Join Date: Apr 2009
  • Posts: 21741
  • Groups: SCI, RMEF, NRA, Hunter Education
Re: Benchmark barrels
« Reply #2 on: October 17, 2018, 04:10:11 PM »
If it doesn't already have one, get a good trigger like a Timney put on it.
Nature. It's cheaper than therapy.

Offline BULLBLASTER

  • Non-Hunting Topics
  • Trade Count: (+15)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 8103
Re: Benchmark barrels
« Reply #3 on: October 17, 2018, 04:23:49 PM »

As for stocks in the 500-800 range manners, McMillan, or agcompmposites
My 300 win has a 9 twist #5 spiral flutedinished at 28.5 inches.
For a 7 mag I would say 26+ on barrel length.
I’ll second the trigger also.

Offline Bill W

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1942
  • Location: Moses Lake
  • Groups: NRA, CBA
Re: Benchmark barrels
« Reply #4 on: October 17, 2018, 04:24:35 PM »
I would be concerned with what chamber dimensions and the length of the throat.

Offline BULLBLASTER

  • Non-Hunting Topics
  • Trade Count: (+15)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 8103
Re: Benchmark barrels
« Reply #5 on: October 17, 2018, 04:30:57 PM »
Let them know what bullets you are thinking of wanting to use and ask their input on chamber specs, they know what works well.

Offline Timberdog

  • Trade Count: (+2)
  • Tracker
  • **
  • Join Date: Mar 2018
  • Posts: 35
  • Location: Westside
Re: Benchmark barrels
« Reply #6 on: October 17, 2018, 05:06:05 PM »
Benchmark rebarreled a rifle for a friend and they cerakote

Offline Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4933
  • Location: Puyallup
Re: Benchmark barrels
« Reply #7 on: October 17, 2018, 05:47:57 PM »
Good advice on the trigger.  I should be able to pick up a Timney without too much trouble.

 

As for stocks in the 500-800 range manners, McMillan, or agcompmposites
My 300 win has a 9 twist #5 spiral flutedinished at 28.5 inches.
For a 7 mag I would say 26+ on barrel length.
I’ll second the trigger also.


28.5 finished including the brake?


Offline BULLBLASTER

  • Non-Hunting Topics
  • Trade Count: (+15)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 8103
Re: Benchmark barrels
« Reply #8 on: October 17, 2018, 05:57:01 PM »
Good advice on the trigger.  I should be able to pick up a Timney without too much trouble.

 

As for stocks in the 500-800 range manners, McMillan, or agcompmposites
My 300 win has a 9 twist #5 spiral flutedinished at 28.5 inches.
For a 7 mag I would say 26+ on barrel length.
I’ll second the trigger also.


28.5 finished including the brake?
mine is 28.5 before the brake. 30 ish including the brake
You definitely don’t need that much but I wouldn’t personally go shorter than 26 before the brake.

Offline Reidus

  • Trade Count: (+15)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 877
  • Location: Tri-Cities
Re: Benchmark barrels
« Reply #9 on: October 17, 2018, 06:42:06 PM »
I think a fluted #4 at 26" is ideal for a pack around hunting rifle. I wouldn't want to go any heavier or longer.

I hear a lot of good things about benchmark.

Manners elite hunter or mcmillan edge in whatever configuration you prefer. (order asap)

Just the standard trigger tech is pretty tough trigger to beat for a hunting rifle.

Offline CAMPMEAT

  • CAMPMEAT
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2010
  • Posts: 13347
  • Location: ARIZONA, A PLACE WHERE I DON'T WANT YOU LIVING !!
  • I love my gun rights in Arizona..
Re: Benchmark barrels
« Reply #10 on: October 17, 2018, 06:59:29 PM »
Put it in a Killer Innovations Orias Chassis.
I couldn't care less about what anybody says..............

Offline Encore 280

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 1992
  • Location: Poulsbo
  • Groups: Encore 280
Re: Benchmark barrels
« Reply #11 on: October 17, 2018, 07:35:25 PM »
X2 on Mad Custom Coatings in Bremerton. They do excellent work. :tup: Had them do my 300 Weatherby and it turned out great.

Offline elkaholic123

  • Political & Covid-19 Topics
  • Trade Count: (+10)
  • Sourdough
  • *****
  • Join Date: Jun 2008
  • Posts: 1736
  • Location: Lake Stevens
  • Groups: Montana Dirty Dozen,Life member RMEF,NAHC, WSF
Re: Benchmark barrels
« Reply #12 on: October 17, 2018, 07:55:13 PM »
Trigger tech triggers are very nice. 👍
« Last Edit: October 18, 2018, 03:59:03 PM by elkaholic123 »
elkaholic

Offline bullfisher

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Feb 2012
  • Posts: 693
  • Location: west side
Re: Benchmark barrels
« Reply #13 on: October 17, 2018, 08:26:10 PM »
As mentioned above, talk to benchmark about chamber specs and your bullet preference.

Offline Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4933
  • Location: Puyallup
Re: Benchmark barrels
« Reply #14 on: October 17, 2018, 08:27:10 PM »
I was looking at the old reliable Timney 510 which is only about 150 bones.  I will do a little look at trigger tech.

X2 on Mad Custom Coatings in Bremerton. They do excellent work. :tup: Had them do my 300 Weatherby and it turned out great.

What was the turn around time?  A friend used them and seemed that it was longer than they quoted by a few weeks.  Not a huge deal.

 


* Advertisement

* Recent Topics

Honda BF15A Outboard Problems by CP
[Today at 12:03:59 PM]


Anybody breeding meat rabbit? by HighlandLofts
[Today at 12:01:17 PM]


Bow mount trolling motors by GWP
[Today at 11:29:07 AM]


where is everyone? by nwwanderer
[Today at 11:12:50 AM]


Oregon special tag info by JakeLand
[Today at 10:27:35 AM]


Another great day in the turkey woods. by rosscrazyelk
[Today at 09:38:55 AM]


Get ready for the 4th of July by rosscrazyelk
[Today at 09:36:56 AM]


Unknown Suppressors - Whisper Pickle by Karl Blanchard
[Today at 09:15:32 AM]


Wolf documentary PBS by Boss .300 winmag
[Today at 09:09:55 AM]


Idaho Mt goat draft plan by time2hunt
[Today at 07:59:04 AM]


Cougar Problems Toroda Creek Road Near Bodie by Elkaholic daWg
[Today at 07:52:17 AM]


Disabled Fishing License by Blacklab
[Today at 07:44:43 AM]


Ever win the WDFW Big Game Raffle? by jackelope
[Today at 07:18:59 AM]


Missoula Fishing by borntoslay
[Yesterday at 11:30:10 PM]


Buck age by borntoslay
[Yesterday at 11:08:41 PM]


Iceberg shrimp closed by Tbar
[Yesterday at 10:55:37 PM]


Fun little Winchester 1890 project by JDHasty
[Yesterday at 07:36:21 PM]


2025 NWTF Jakes Day by wadu1
[Yesterday at 07:28:59 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal