collapse

Advertisement


Author Topic: cva accura  (Read 1646 times)

Offline oldschool

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 308
cva accura
« on: November 08, 2018, 10:27:57 AM »
 New accura loads easy first shot.But on second sabot comes up 2 inches short of full seating.Extremely hard to seat final 2 inches.I have a cva elkhorn with probably 300 rounds down pipe bergarra barrel. No problems100 grains loose and 250 grain hornnady.

Online andersonjk4

  • Non-Hunting Topics
  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Jul 2010
  • Posts: 1293
  • Location: Spangle, WA
Re: cva accura
« Reply #1 on: November 08, 2018, 10:48:47 AM »
What powder are you using?  What caps or primers are you using?  I have an Accura as well and noticed a definite "crud" ring that forms with Triple 7 and musket caps.  Not that bad after only 1 shot, but if you don't get the crud ring out it can build up over many shots and I could see it causing loading issues.  I shoot Hornady 250 gr SSTs in my Accura and don't have loading issues until about shot 4 or 5 without running a patch down between shots. 

Offline flyfishWA

  • WA State Trappers Association
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jun 2018
  • Posts: 356
  • Location: Yacolt
Re: cva accura
« Reply #2 on: November 08, 2018, 08:51:38 PM »
You would probably get more advice in the muzzleoader section? :dunno: I usually run a cleaning patch down inbetween shots with my cva wolf shooting basically the same load and that works good.
"speak softly and carry a big stick" Theodore Roosevelt

Offline oldschool

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 308
Re: cva accura
« Reply #3 on: November 09, 2018, 08:27:34 AM »
 I'm using triple 7 powder with 209 primmers and hornady 250s

Offline Reidus

  • Trade Count: (+15)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 877
  • Location: Tri-Cities
Re: cva accura
« Reply #4 on: November 09, 2018, 08:41:39 AM »
Google Triple 7 crud ring. It builds up a ring of crud and prevents your bullet from seating all the way. Not sure how to fix this other than trying different powder. Could swab between shots. Some people say they have a problem with it and others say they don't.

Offline oldschool

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 308
Re: cva accura
« Reply #5 on: November 09, 2018, 11:58:29 AM »
 Thx for help.

 


* Advertisement

* Recent Topics

Rehome for GWP by metlhead
[Today at 06:31:18 PM]


Idaho 2025 Controlled Hunts by addicted1
[Today at 06:27:30 PM]


Entiat Quality tag by waoutdoorsman
[Today at 06:24:20 PM]


Mudflow Archery by Torrent50
[Today at 06:06:28 PM]


2025 Draw Results by ganghis
[Today at 06:03:08 PM]


Vashon Island deer tag by bowhunter_1
[Today at 04:32:43 PM]


Oregon results posted. by trophyhunt
[Today at 04:09:23 PM]


Palouse/Mica (GMU 127) Access for Trades Work by high_hunter
[Today at 03:24:17 PM]


Boat registration by Bullkllr
[Today at 02:36:52 PM]


Oregon special tag info by Tree Killer
[Today at 01:40:51 PM]


Cowiche Cow Archery Tag - Group Hunt by VickGar
[Today at 12:45:06 PM]


Ritzville Rifle Buck - GMU 284 by Sundance
[Today at 12:37:11 PM]


Eastern WA-WT hunting from tree stands?? by finnman
[Today at 12:28:44 PM]


Stillaguamish 448 QD rifle tag by Hi-Liter
[Today at 12:06:37 PM]


Muzzy Mission Quality!!! by finnman
[Today at 11:54:18 AM]


Colockum Archery Bull Tag by throttlejocky20
[Today at 11:27:12 AM]


For the Vortex guys by pianoman9701
[Today at 11:23:45 AM]


Teanaway bull elk by throttlejocky20
[Today at 11:23:44 AM]


Palouse buck deer by MMCCAULEY
[Today at 11:09:55 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal