collapse

Advertisement


Author Topic: Knight ULite Nitride - Back on the Farm  (Read 1547 times)

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Knight ULite Nitride - Back on the Farm
« on: January 29, 2019, 04:31:03 PM »
A really nice day on the Palouse today.... bright sunny and 33* - a really good time to go shoot some more.  Even though it was 33* the farm field was thawing faster than I thought it might.  I was able to make my way out and up the field with a minimal amount 'Palouse Clay' sticking to my boots.  Placed some birds at 125, 175, and 200 yards.

I did make a change today.  I have been shooting MMP HPH-24 sabots in the rifle.  They are very tight going through the crown after the crown they move down the bore maybe a little tighter than I like.  I kept telling myself just keep shooting the barrel is new and need a break in period.  I started as usual with the HPH-24, loaded the first two shots with the 24's but noticed that I was deforming the petals a little bit as it went through the crown.  The two shots shot really well as they had in the past.  But I decided to try some Harvester 5045B Crush Rib sabots, just to see or actually feel the diference in loading pressure while watching for any deformation of the petals as it went through the crown.  I loaded very well so I continued to use them for this shoot.  At the end of the shoot while shooting the 175 yard birds I did also try some MMP HPH-3P sabots.  They loaded equally well and with no deforming of the petals.  They also shot right on.

The Nitride version still continues to impress me.  The Nitride finish adds another deminsion to the protection of the bore and well actually the whole rifle.  It is an easy clean up for me as is/was the Stainless Steel model.  I really wish I could find out more particulars about the Parker 'Tuffride' application process. I did talk a person at Knight about the process and he describe it as a 3 step process, anyway that is what I took away from the discussion.  You can find a lot of information about the Nitride process but I do not find the specifics of the Parker TrueTec -Tuffride process.



This is collection of pictures from the visit to the farm today...



I really wish I could say it was a one shot - one bird day - but - no such luck.  The birds at 175 and 200 were a challenge.  I was always really close to them with each shot but at those ranges and with the wind across the draw it took 5 shots for 3 birds...

Still it was great afternoon outside!


Keep shooting muzzleloaders - They are a blast!!

 


* Advertisement

* Recent Topics

Long shot by buglebuster
[Today at 01:23:18 PM]


Really would you send your dog? by EnglishSetter
[Today at 01:20:19 PM]


Blackstone newbie by buglebuster
[Today at 12:36:20 PM]


Shooting someone else's injured buck - etiquette question by no.cen.wa
[Today at 12:36:15 PM]


Pack/ backpack to carry a folding long and edc etc.? by Stein
[Today at 12:01:40 PM]


Idaho Non-res hunt draw by kselkhunter
[Today at 11:13:01 AM]


Kubota repair shop by Ridgeratt
[Today at 10:29:47 AM]


2025 15th Annual Hunting-Washington Christmas Gift Exchange by wadu1
[Today at 09:34:17 AM]


The Hunt for a Next level buck… by teanawayslayer
[Today at 08:13:39 AM]


Montana Cutting Deer Licenses by MMCCAULEY
[Today at 08:07:07 AM]


GM 6.6l gas 6 speed vs. 10 speed? by Happy Gilmore
[Today at 12:51:24 AM]


Rut Buddies by 270Flat
[Yesterday at 11:10:04 PM]


more mass?, not sure I care by Pathfinder101
[Yesterday at 09:44:27 PM]


Perfect evening hunt by Caseknife
[Yesterday at 07:17:56 PM]


Who knows electric bikes? looking at Quietkat options by highside74
[Yesterday at 06:08:29 PM]


The "King" by andrew_in_idaho
[Yesterday at 03:15:02 PM]


3 pintails by metlhead
[Yesterday at 03:05:26 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal