collapse

Advertisement


Author Topic: Opening a can of worms....  (Read 15392 times)

Offline BULLBLASTER

  • Non-Hunting Topics
  • Trade Count: (+15)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 8104
Re: Opening a can of worms....
« Reply #15 on: December 14, 2018, 07:26:11 PM »
Your starting at the wrong end.  Which bullet do you want to shoot? How fast do you want to push it? Which cartridges will get you to that point?
This is why I started this thread...I'm honestly not sure. I'm just starting to get into reloading and have only done 2 different calibers and both partitions. I've read great things about the Berger's, figured I'd start with those and see how those shot
.264, .284, .308, .338 all have excellent choices for high bc target and hunting bullets.

Offline syoungs

  • Political & Covid-19 Topics
  • Trade Count: (+8)
  • Sourdough
  • *****
  • Join Date: Aug 2012
  • Posts: 2266
  • Location: tri cities, WA
Re: Opening a can of worms....
« Reply #16 on: December 14, 2018, 07:26:36 PM »
That does work a bit, but if you know you want to push the real heavy 7mm bullets, a 7mm-08 would be a poor choice over a 28 nosler, and a 1-12 twist wouldn't be ideal.

Gotta have an idea with what you want the end goal to be.

I'm building a rifle for deer, elk, bear and antelope. My choice was a 300wm shooting 215 bergers. Knowing I'm pushing heavier bullets I'm going to ensure j have at least a 1-10 twist, and a mag setup that will let me seat long enough without eating case capacity.
And yes I know its overkill for antelope and most deer, but I've also got a 6.5 creed to use when I dont need the 215s and long range.

Offline deerhunter_98520

  • Past Sponsor
  • Trade Count: (+4)
  • Old Salt
  • *****
  • Join Date: Nov 2009
  • Posts: 8928
  • Location: aberdeen, wa
  • Chief Executive Head Anarchist of YKWTSASFFRO
Re: Opening a can of worms....
« Reply #17 on: December 14, 2018, 07:34:06 PM »
I don't think I'll need anything that big, I want something I'll enjoy shooting bot getting punished at the range   :chuckle:
Official hunt-wa bigfoot field researcher!

Offline carvermoe

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Aug 2008
  • Posts: 209
Re: Opening a can of worms....
« Reply #18 on: December 14, 2018, 07:56:26 PM »
300 WSm with a brake and bergers

Offline Karl Blanchard

  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Aug 2008
  • Posts: 10643
  • Location: Selah, WA
  • Jonathan_S hunting apparel prostaff
  • Groups: Sitka Gear Fan Boy for LIFE
Re: Opening a can of worms....
« Reply #19 on: December 14, 2018, 07:59:51 PM »
280AI
It is foolish and wrong to mourn these men.  Rather, we should thank god that such men lived.  -General George S. Patton

Aaron's Profile:  http://hunting-washington.com/smf/index.php?action=profile;u=2875
Aaron's Posts:  http://hunting-washington.com/smf/index.php?action=profile;area=showposts;u=2875
Aaron's Facebook:  https://www.facebook.com/aaron.blanchard.94

Offline KFhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Jan 2011
  • Posts: 34512
  • Location: NE Corner
Re: Opening a can of worms....
« Reply #20 on: December 14, 2018, 08:02:23 PM »
6.5-300 weatherby


north 40 has one on sale  :tup:


Offline deerhunter_98520

  • Past Sponsor
  • Trade Count: (+4)
  • Old Salt
  • *****
  • Join Date: Nov 2009
  • Posts: 8928
  • Location: aberdeen, wa
  • Chief Executive Head Anarchist of YKWTSASFFRO
Re: Opening a can of worms....
« Reply #21 on: December 14, 2018, 08:10:15 PM »
So basically what I'm reading is pick like 6 calibers I like, put them in a hat and pick one out  :chuckle: man this is going to be harder that I thought to pick out
Official hunt-wa bigfoot field researcher!

Offline NWShooter

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2016
  • Posts: 239
  • Location: Oregon
  • Groups: RockyMountain Elk foundation, Mule Deer Foundation, NRA.
Re: Opening a can of worms....
« Reply #22 on: December 14, 2018, 08:29:17 PM »
Your starting at the wrong end.  Which bullet do you want to shoot? How fast do you want to push it? Which cartridges will get you to that point?

 :tup:

I would start with a 215gr .30 Cal Berger and go from there.
A empty vessel makes the most noise.

"Every normal man must be tempted , at times, to spit on his hands, hoist the black flag, and begin slitting throats."

Online jrebel

  • Non-Hunting Topics
  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Feb 2008
  • Posts: 11326
  • Location: East Wenatchee
Re: Opening a can of worms....
« Reply #23 on: December 14, 2018, 08:35:43 PM »
I ended up with a 300 win mag and love it.  I was reminded of why I didn't like the 7 mag this year when my neighbor shot his deer.....man the blood shot was something else.   Never seen a 7 mag not make a mess of a deer.  Effective but a mess....and my 300 pushing heavies a little slower doesn't make near the mess. 

Good luck finding your caliber...there are many that will fit the bill. 

Offline Taco280AI

  • Past Sponsor
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jan 2013
  • Posts: 2961
  • Location: FL350
Re: Opening a can of worms....
« Reply #24 on: December 14, 2018, 09:17:15 PM »
I ended up with a 300 win mag and love it.  I was reminded of why I didn't like the 7 mag this year when my neighbor shot his deer.....man the blood shot was something else.   Never seen a 7 mag not make a mess of a deer.  Effective but a mess....and my 300 pushing heavies a little slower doesn't make near the mess. 

Good luck finding your caliber...there are many that will fit the bill.

What bullet? That matters far more important than the cartridge

Online jrebel

  • Non-Hunting Topics
  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Feb 2008
  • Posts: 11326
  • Location: East Wenatchee
Re: Opening a can of worms....
« Reply #25 on: December 14, 2018, 09:30:35 PM »
I ended up with a 300 win mag and love it.  I was reminded of why I didn't like the 7 mag this year when my neighbor shot his deer.....man the blood shot was something else.   Never seen a 7 mag not make a mess of a deer.  Effective but a mess....and my 300 pushing heavies a little slower doesn't make near the mess. 

Good luck finding your caliber...there are many that will fit the bill.

What bullet? That matters far more important than the cartridge

Not sure what bullet they were using but I have never seen a bullet out of a 7 mm not destroy meat.  This deer was shot behind the shoulder and it still blood shot 3/4 the off side shoulder. 


Offline NWShooter

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2016
  • Posts: 239
  • Location: Oregon
  • Groups: RockyMountain Elk foundation, Mule Deer Foundation, NRA.
Re: Opening a can of worms....
« Reply #26 on: December 15, 2018, 12:40:06 AM »
I ended up with a 300 win mag and love it.  I was reminded of why I didn't like the 7 mag this year when my neighbor shot his deer.....man the blood shot was something else.   Never seen a 7 mag not make a mess of a deer.  Effective but a mess....and my 300 pushing heavies a little slower doesn't make near the mess. 

Good luck finding your caliber...there are many that will fit the bill.

What bullet? That matters far more important than the cartridge

Not sure what bullet they were using but I have never seen a bullet out of a 7 mm not destroy meat.  This deer was shot behind the shoulder and it still blood shot 3/4 the off side shoulder.


Hmmmmmmm. Can't think of a bullet that hasn't destroyed meat. On at least three continents .🇺🇸👍🇺🇸
« Last Edit: December 15, 2018, 12:47:18 AM by NWShooter »
A empty vessel makes the most noise.

"Every normal man must be tempted , at times, to spit on his hands, hoist the black flag, and begin slitting throats."

Offline Reidus

  • Trade Count: (+15)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 877
  • Location: Tri-Cities
Re: Opening a can of worms....
« Reply #27 on: December 15, 2018, 12:56:21 AM »
280ai is an awesome round!

Offline NWShooter

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2016
  • Posts: 239
  • Location: Oregon
  • Groups: RockyMountain Elk foundation, Mule Deer Foundation, NRA.
Re: Opening a can of worms....
« Reply #28 on: December 15, 2018, 01:13:14 AM »
280ai is an awesome round!

Almost on par with a super efficient, superior case design 7mm WSM.
A empty vessel makes the most noise.

"Every normal man must be tempted , at times, to spit on his hands, hoist the black flag, and begin slitting throats."

Offline Karl Blanchard

  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Aug 2008
  • Posts: 10643
  • Location: Selah, WA
  • Jonathan_S hunting apparel prostaff
  • Groups: Sitka Gear Fan Boy for LIFE
Re: Opening a can of worms....
« Reply #29 on: December 15, 2018, 07:04:57 AM »
I'd go 7saum over 7wsm. 
It is foolish and wrong to mourn these men.  Rather, we should thank god that such men lived.  -General George S. Patton

Aaron's Profile:  http://hunting-washington.com/smf/index.php?action=profile;u=2875
Aaron's Posts:  http://hunting-washington.com/smf/index.php?action=profile;area=showposts;u=2875
Aaron's Facebook:  https://www.facebook.com/aaron.blanchard.94

 


* Advertisement

* Recent Topics

Selkirk bull moose. by 6haase6
[Today at 07:29:05 PM]


Steel Targets??? by jrebel
[Today at 05:30:52 PM]


Buying pheasants for training by Ellensburg
[Today at 03:45:33 PM]


Greenriver quality Elk permit by First timer
[Today at 03:13:57 PM]


Bow mount trolling motors by Stein
[Today at 09:05:06 AM]


Oregon results posted. by trophyhunt
[Today at 08:51:12 AM]


best draw for moose unit wise by hunter399
[Today at 08:31:10 AM]


Idaho 2025 Controlled Hunts by trophyelk6x6
[Today at 08:24:13 AM]


2025 OILS! by Ridgerunner
[Today at 07:40:49 AM]


FFL preferences or warnings in Olympia or south Sound area? by lhrbull
[Today at 06:59:24 AM]


Nooksack Archery Tag by LongBomb
[Today at 06:29:37 AM]


I’m on a blacktail mission by Turner89
[Yesterday at 11:33:35 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Yesterday at 09:54:06 PM]


Basin elk by hughjorgan
[Yesterday at 09:50:49 PM]


Getting back into dogs by bearpaw
[Yesterday at 09:06:14 PM]


Cowiche Quality Buck by Nwgunner
[Yesterday at 08:55:00 PM]


MA-10 Coho by WAcoueshunter
[Yesterday at 08:50:46 PM]


Is FS70 open? by CarbonHunter
[Yesterday at 08:09:04 PM]


Muzzy Mission Quality!!! by NOCK NOCK
[Yesterday at 07:49:11 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal