collapse

Advertisement


Author Topic: Torque Converter issues? Cost?  (Read 3472 times)

Offline coachcw

  • Past Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jun 2009
  • Posts: 8821
  • Groups: Team getsum !
Re: Torque Converter issues? Cost?
« Reply #15 on: January 09, 2019, 06:04:58 PM »
Stop the bus , very possibly a broken or cracked flex plate , I cant say i ever saw a neon with loose bolts on the converter . you should be able to pull the inspection cover between the oil pan and bell housing , often you can see cracks and rust right near the crank hub . if it was a rod the dishes would allready be done , i have seen pistons on those make noise , by pulling injector wires you could isolate it to a specific cylinder .

Offline Pete112288

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 1233
  • Location: Vancouver, WA
Re: Torque Converter issues? Cost?
« Reply #16 on: January 09, 2019, 10:00:40 PM »
Ended up taking it in to have it checked out. Turns out the noise wasnt coming from where I thought. They figured out it was a lose bolt in a rocker... or something. Forgot exactly what he called it, just remember it was rocker something. He was slightly confused and said that normally does not happen unless someone has had that part of it opened up and worked on recently, which is not the case. But any way, it ended up being a heck of a lot cheaper than what I feared it was anyway.

 


* Advertisement

* Recent Topics

38% increase in fishing and hunting licenses by Mfowl
[Today at 06:40:54 PM]


Sockeye Numbers by Deer slayer
[Today at 06:38:59 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by MADMAX
[Today at 06:18:05 PM]


Lynx kittens confirmed in the Kettle Range by JakeLand
[Today at 05:55:33 PM]


50 inch SXS and Tracks? by 92xj
[Today at 05:34:03 PM]


3 days for Kings by MADMAX
[Today at 05:06:49 PM]


Seeking recommendations on a new scope by Rugergunsite308
[Today at 04:55:47 PM]


Full moon and last week of September by pd
[Today at 04:51:23 PM]


Hunting bears in the thick stuff by ghosthunter
[Today at 04:33:46 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by ASHQUACK
[Today at 04:15:14 PM]


2025 Canning by Twispriver
[Today at 02:13:36 PM]


GMU 247 Entiat bear hunting by Ridgerunner
[Today at 11:56:01 AM]


Best all around muzzy (updated) by CamoDup
[Today at 09:41:58 AM]


2025 Montana alternate list by CaNINE
[Today at 05:52:10 AM]


2025 Crab! by spin05
[Today at 05:11:11 AM]


Cowiche Quality Buck by buglebuster
[Yesterday at 10:29:26 PM]


Accura MR-X 45 load development by kyles_88
[Yesterday at 08:03:44 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal