Leupold dial problems

[Ajj828]

I have a leupold vx2 CDS scope and it’s a really good scope but the only problem I’m having is that it keeps coming out of its zero. The elevation dial gets adjusted super easily on accident when I’m strapping the rifle to my pack or carrying it on my sling. The dial gets moved and I have to make a 50/50 decision on which way the dial was turned while on my pack. I have tightend the dial down as much as it can go without stripping the little bolts. Should I just tape the dial down? I just like having a 200 yard zero and will never need to actually adjust it. I have not ordered my free cds dial it’s the original dial that is on the rifle.

[Duckslayer89]

I have a leupold vx2 CDS scope and it’s a really good scope but the only problem I’m having is that it keeps coming out of its zero. The elevation dial gets adjusted super easily on accident when I’m strapping the rifle to my pack or carrying it on my sling. The dial gets moved and I have to make a 50/50 decision on which way the dial was turned while on my pack. I have tightend the dial down as much as it can go without stripping the little bolts. Should I just tape the dial down? I just like having a 200 yard zero and will never need to actually adjust it. I have not ordered my free cds dial it’s the original dial that is on the rifle.

I thought the CDS had a zero stop on it? Mine does on th Vx2 and also a zero lock on my VX6

[Crunchy]

I would give Leupold a call.  They stand behind their products and will fix it.

[BULLBLASTER]

You can order a single revolution dial, or can even modify the one you have to limit to one rev. It stops at your zero and gives you almost one rev up.

[Randonee]

Bullblaster, I’m wondering if you could describe how to do the modification, or know where it can be found. I have a vx-3 CDS I’d like to make have a zero stop or limit it to one turn.  Thanks for any info. 

[BULLBLASTER]

I know it works on the vx3 and I think the vx 2 is the same.  If you take the turret cap off and turn it over there is a hole drilled in the bottom. When they make the single rev caps they index that hole so that a ball bearing ( or small piece of metal) glued in can stop the rotation of the turret. I’ll get some pictures

[BULLBLASTER]

This picture shows a nonzerostop cap on the left (empty drilled hole) and a zerostop cap on the right (ball bearing in the hole)

[BULLBLASTER]

This picture shows the placement (indexing of the zerostop in relation to the outside markings. You want it 1/2 moa below zero

[BULLBLASTER]

This one shows how it works. There is a little tooth or tab that sticks up on the scope body inside the turret cap (end of Allen key points at it) your ball bearing or other metal piece hits that and stops rotation. You want it to rest on the right edge of that tab when at zero and then it will limit you to just short of a revolution when you dial up.

[BULLBLASTER]

So all you need to do is drill a small hole inside the track on the inside of the turret cap at 14.25 moa (3 clicks below or to the right of zero) marking and press or glue a stop in there. Just be sure it doesn’t extend out of the little track.

[Randonee]

Bullblaster, great info and explanation. Very much appreciated!

[BULLBLASTER]

Bullblaster, great info and explanation. Very much appreciated!

i was hoping I could convey it well enough so people could understand 


#makehuntwagreatagain

[yorketransport]

This cracks me up, the first thing I do when I get a CDS scope is take a file and file down the little tab so I can have multiple revolutions on the dial.

[BULLBLASTER]

This cracks me up, the first thing I do when I get a CDS scope is take a file and file down the little tab so I can have multiple revolutions on the dial.

The moa dial that comes with it can spin all the times around even without filing the tab off. 

[royalbull]

This cracks me up, the first thing I do when I get a CDS scope is take a file and file down the little tab so I can have multiple revolutions on the dial.




I like multiple revolutions also but with one revolution of my Mark 5 being 1400 yards I doubt I'll ever need more than one