collapse

Advertisement


Author Topic: Chainsaw question  (Read 6079 times)

Offline BD1

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2011
  • Posts: 1615
  • Location: Snohomish County
Re: Chainsaw question
« Reply #15 on: December 13, 2018, 08:22:51 AM »
Thank you for all the responses  :tup:

Offline spin05

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Jul 2007
  • Posts: 1265
  • Location: Camano Island
Re: Chainsaw question
« Reply #16 on: December 25, 2018, 07:33:41 AM »
the stihls have cap problems. try a new cap

Offline PolarBear

  • Site Sponsor
  • Trade Count: (+4)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 10468
  • Location: Tatooine
Re: Chainsaw question
« Reply #17 on: December 25, 2018, 10:31:16 AM »
All 4 of my Stihl's from my 015 all the way up to the MS 880 mag leak a little bar oil.

Offline C-Money

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2008
  • Posts: 11012
  • Location: Grant County
  • Self proclaimed 3pt master
Re: Chainsaw question
« Reply #18 on: December 26, 2018, 07:30:49 AM »
My huskies have always dripped

Mine too!! I put a few paper towels down under my saw to soak it up...
I felt like a one legged cat trying to bury a terd on a frozen pond!

Offline Smokepole

  • Kevin Miller
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2008
  • Posts: 2336
  • Location: Upper Skyberian
Re: Chainsaw question
« Reply #19 on: December 26, 2018, 07:56:20 AM »
Cheap bar oil is runny and drips right out.  I like genuine Stihl bar oil.  It's thicker, like honey.  It doesn't spray all over my jeans, and it doesn't leak all over the back of my truck.   :twocents:

What type of oil are you using?

Offline bhawley76

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 943
  • Location: curlew wa
Re: Chainsaw question
« Reply #20 on: December 26, 2018, 08:21:20 AM »
That's just sweat from all that power, Husky guys would never understand :chuckle: :chuckle:

Offline PolarBear

  • Site Sponsor
  • Trade Count: (+4)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 10468
  • Location: Tatooine
Re: Chainsaw question
« Reply #21 on: December 27, 2018, 10:26:15 AM »
That's just sweat from all that power, Husky guys would never understand :chuckle: :chuckle:
:yeah:

Offline BD1

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2011
  • Posts: 1615
  • Location: Snohomish County
Re: Chainsaw question
« Reply #22 on: December 31, 2018, 10:22:16 AM »
I am using STIHL bar oil...it's seems to be better now, so I'm thinking one of the kids may have knocked it over and then set it back upright. I realize there will be so leakage. The saw has been amazing  :tup: thanks again for the help.
BD1

Offline tlbradford

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 3518
  • Location: Veradale
Re: Chainsaw question
« Reply #23 on: December 31, 2018, 01:40:44 PM »
That's just sweat from all that power, Husky guys would never understand :chuckle: :chuckle:
:yeah:

Of course the Husky guys are done cutting all their wood with less power, by the time Stihl owners get done adjusting their carb!   :hello:  :peep:   :stirthepot:
Dreams are forever on the mind, realization in the hands.

Offline T-Dozzer

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 868
  • Location: East and West
Re: Chainsaw question
« Reply #24 on: January 03, 2019, 06:33:21 PM »
What model is it? There are a few home owner grade Stihls notorious for this.
Did you run it recently & have you cleaned out the oil holes & channel in bar?
Like others said, a little dripping out of the oiler hole is normal. I have 3 that do it. If its leaking out of the case, thats not good. A bad seal there, could overheat your saw quick. You can do a vacume test on it to determine a leak.
Arboursite.com has alot of saw gurus. You could ask there too.

Offline woodswalker

  • Curmudgeon in training
  • Washington For Wildlife
  • Trade Count: (+14)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1764
  • Location: on the way to Stevens Pass
    • https://www.facebook.com/Grumpys-Gun-Repair-153675238330367/?ref=br_rs&pnref=lhc
    • Grumpys Gun Repair
  • Groups: NRA Life Member, Ducks Unlimited, RMEF, SRPA WHEIA
Re: Chainsaw question
« Reply #25 on: January 03, 2019, 07:23:17 PM »
All 8 of my Stihls leak bar oil to one degree or another, MS250 to the 066Mag, keep the right weight oil for the season and make sure that the cap o-rings are good.
A Smith & Wesson Beats Four Aces.

Whatta ya mean I can't have one of each?

What we have here is...Washington Department of NO Fish and WATCHABLE Wildlife.
 
WDFW is going farther and farther backwards....we need FISH AND GAME back!

Offline Sliverslinger

  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Nov 2010
  • Posts: 781
  • Location: Salkum, wa
Re: Chainsaw question
« Reply #26 on: January 03, 2019, 09:25:17 PM »
All of my saws leak a bit. Good high quality oil is thicker and tends to help.
SliverSlinger

Offline BD1

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2011
  • Posts: 1615
  • Location: Snohomish County
Re: Chainsaw question
« Reply #27 on: January 03, 2019, 09:39:55 PM »
Thanks T-Dozzer and others. I think I may have a bigger issue...forgot to check model but saw that is leaking a fair enough to warrant dropping it by the shop that I bought it at...cool small local shop that's been around for 30+ years. Hope it is something simple. Will post results soon.

Offline wildfire

  • Trade Count: (+1)
  • Tracker
  • **
  • Join Date: Sep 2013
  • Posts: 80
  • Location: Seattle
Re: Chainsaw question
« Reply #28 on: March 24, 2019, 11:54:49 AM »
I had the same problem and replaced the rubber oiler line and solved the problem

 


* Advertisement

* Recent Topics

Wowzers by Kingofthemountain83
[Today at 06:29:57 PM]


2025 deer, let's see em! by Hunting Cowboy
[Today at 06:24:31 PM]


As He Lay by Pathfinder101
[Today at 06:24:21 PM]


Meet Kumpel by elkboy
[Today at 06:18:56 PM]


Montana Elk Last Ditch Effort by Stein
[Today at 06:15:41 PM]


The Gutless Method by Stein
[Today at 06:12:32 PM]


Aladdin unit 111 mule deer quality tag by Pathfinder101
[Today at 06:10:59 PM]


Drew Pogue Quality by Boss .300 winmag
[Today at 06:08:22 PM]


Older SxS shotgun by wadu1
[Today at 05:22:45 PM]


211 Mile Ambler Road Through The Brooks Range Approved by dwils233
[Today at 04:51:34 PM]


Bull moose...luck or ??? by Buckhunter24
[Today at 03:10:51 PM]


King of the mountain caught sleeping by EnglishSetter
[Today at 03:08:14 PM]


GM 6.6l gas 6 speed vs. 10 speed? by Happy Gilmore
[Today at 01:51:59 PM]


My 2025 Wyoming trip by Falcon
[Today at 01:43:14 PM]


Break my heart - Archery World is closing by pianoman9701
[Today at 10:07:25 AM]


2024 Ford Edge Opinion/Bought a Chevrolet by NOCK NOCK
[Today at 05:14:27 AM]


What are you cooking? by Pnwrider
[Yesterday at 10:27:08 PM]


My 2025 Montana Buck by JDArms1240
[Yesterday at 10:18:25 PM]


Where to find hunting mentors/etc in western wa (archery) by high_hunter
[Yesterday at 08:14:54 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal