So since I cannot kill a turkey for the life of me, decided to shake up turkey camp next week by showing up with a KSG.
Started forming the plan in Feb. started watching you tube videos. On choke adapters.
Than there was plugging the magazines to only hold two 3 inch shells.
Best video on gaining access to mags was one on changing the followers.
And not one but four special tools. And two wood dowels from hardware store.
Got all the components and a quiet Sunday afternoon alone I tackled the job.
First off with the front flip site. And the rail screw.
Than the barrel nut with special tool #1.
Than the two mag tube bolts with special tool # 2. 1/4 turn each at a time.
And the front plate comes off.
Than the magazine caps with special too #3
Special too #. 4 is a vice block made to hold the KSG in a vice.
Than the magazine springs.
Put a wood dowl in left mag. So it could not receive shells , and shorter dowl in the right side to allow two 3 inch long beards.
Now put back together and checked everything.
Now I am ready to screw on choke adapter in place of barrel nut.
Ummm. What did I do with that adapter I got last month.
Three hours later no adapter. Ummm
Go to bed.
6 am I come awake and a voice says check your work bag. Yep there’s the adapter.
Screwed it on tonight and inserted a Carlson Long Beard choke.
Now to check the pattern.