Cleaning surface rust

[bowhunterforever]

I have a remmington 870 that sat under the truck seat for a couple weeks. Trying to get the best cleaner or cleaners to get it all off and back to normal. I have always had issue with this gun getting surface rust quick. What cleaner do you guys recommend to get it off and what should I put on it after I get it off to keep it from getting rusty so quick? Thanks

[Jellymon]

As a rust preventative I use breakfree clp. Ive hunted all day in the pouring rain after putting a thin film of it on my rifle, and at the end of the day the film is still there. Haven’t had any rust at all since using it.

[huntnfmly]

As a rust preventative I use breakfree clp. Ive hunted all day in the pouring rain after putting a thin film of it on my rifle, and at the end of the day the film is still there. Haven’t had any rust at all since using it.

+1

[bowhunterforever]

As a rust preventative I use breakfree clp. Ive hunted all day in the pouring rain after putting a thin film of it on my rifle, and at the end of the day the film is still there. Haven’t had any rust at all since using it.

+1

Do you guys think it will clean the little rust that's on there already with a little scrubing? Then when its gone put a light coating on

[huntnfmly]

Yes my daughters benelli did the same thing works great

[bowhunterforever]

This the right stuff



Sent from my iPhone using Tapatalk

[jdb]

I bought a 94 .32 special that had lots of surface rust and I scrubber with clp and a pure copper brush

[bowhunterforever]

I bought a 94 .32 special that had lots of surface rust and I scrubber with clp and a pure copper brush

How did it turn out?

[jdb]

Good. Takes it off and won't scratch the metal.

[wadu1]

Flitz works great, been using it for years. It's what Boeing used to burnish out blemishes in cargo liners in the old days.

[pafriend]

I was having problems with an Anschütz that rusted easily until I started using Ballistol. Now I use it on all of my guns, gardening tools, etc.