collapse

Advertisement


Author Topic: Jason’s 338-375 Ruger Build  (Read 17208 times)

Offline Jason

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3563
  • Location: Kalama
Re: Jason’s 338-375 Ruger Build
« Reply #75 on: March 27, 2020, 09:25:16 PM »
The little shop down in Cinebar has had a LOT of H4350 lately. I picked up a keg 2 weeks ago for a buddy, sent another guy in there to pick up a keg, then I went back by there and picked up a case (10) of 1 pounders last weekend for myself and any local folks who might need some down the road. I still have half a keg that I picked up a while back as well.

If you're every down around Hwy 12 outside of Mossyrock/Morton, check in with Firemasters Firearms and see what he's got for powder on hand. It's amazing what he'll have and how much he'll have sometimes!
I’ll call down there tomorrow.

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Re: Jason’s 338-375 Ruger Build
« Reply #76 on: March 27, 2020, 09:31:08 PM »
The little shop down in Cinebar has had a LOT of H4350 lately. I picked up a keg 2 weeks ago for a buddy, sent another guy in there to pick up a keg, then I went back by there and picked up a case (10) of 1 pounders last weekend for myself and any local folks who might need some down the road. I still have half a keg that I picked up a while back as well.

If you're every down around Hwy 12 outside of Mossyrock/Morton, check in with Firemasters Firearms and see what he's got for powder on hand. It's amazing what he'll have and how much he'll have sometimes!
I’ll call down there tomorrow.

It would be a pretty good run for you from down where you're at, but might be worth it. If nothing else, Ken is a great and he's got a lot of very cool guns in there at great prices. You'd probably end up leaving with powder and a couple guns. :chuckle:

Offline Jason

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3563
  • Location: Kalama
Re: Jason’s 338-375 Ruger Build
« Reply #77 on: March 28, 2020, 06:38:53 AM »
The little shop down in Cinebar has had a LOT of H4350 lately. I picked up a keg 2 weeks ago for a buddy, sent another guy in there to pick up a keg, then I went back by there and picked up a case (10) of 1 pounders last weekend for myself and any local folks who might need some down the road. I still have half a keg that I picked up a while back as well.

If you're every down around Hwy 12 outside of Mossyrock/Morton, check in with Firemasters Firearms and see what he's got for powder on hand. It's amazing what he'll have and how much he'll have sometimes!
I’ll call down there tomorrow.

It would be a pretty good run for you from down where you're at, but might be worth it. If nothing else, Ken is a great and he's got a lot of very cool guns in there at great prices. You'd probably end up leaving with powder and a couple guns. :chuckle:
I love to drive. Plus it gets me out of the house. Social distancing practices in full effect.

Offline Jason

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3563
  • Location: Kalama
Re: Jason’s 338-375 Ruger Build
« Reply #78 on: March 28, 2020, 06:28:34 PM »
Out with the old in with the new primers.

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5615
Re: Jason’s 338-375 Ruger Build
« Reply #79 on: March 28, 2020, 07:24:46 PM »
I was getting hangfires till I switched from CCI to the 215’s.  Was scary like blackpowder. 

Offline Jason

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3563
  • Location: Kalama
Re: Jason’s 338-375 Ruger Build
« Reply #80 on: March 28, 2020, 09:42:22 PM »
I was getting hangfires till I switched from CCI to the 215’s.  Was scary like blackpowder.
Glad they worked out for you. I’m hoping these tighten up my speeds. I was getting the occasional speed drop or spike before and now I’m thinking it was the primers throwing inconsistent charges.

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6542
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Jason’s 338-375 Ruger Build
« Reply #81 on: April 05, 2020, 07:44:32 AM »
Have you gotten her dialed in yet?
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline Jason

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3563
  • Location: Kalama
Re: Jason’s 338-375 Ruger Build
« Reply #82 on: April 05, 2020, 07:54:54 AM »
Have you gotten her dialed in yet?
We will find out today. I got all the primers swapped out for the federal gm215m.
I picked up 4 more pounds of H4350 yesterday and I have some more projectiles coming. As long as we aren’t in full can’t go anywhere lockdown then I should be able to throw some lead for the next couple weekends.

I’m thinking of loading some up with H1000. What was your powder charge range on yours?

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6542
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Jason’s 338-375 Ruger Build
« Reply #83 on: April 05, 2020, 09:47:44 AM »
With the 250gr Berger’s I started with 78gr h1000 and hit pressure at 85gr.  Keep in mind I have about 4-5% more capacity than the standard 338/375R. 
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline Goshawk

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2011
  • Posts: 633
  • Location: Lewis County
Re: Jason’s 338-375 Ruger Build
« Reply #84 on: April 05, 2020, 07:00:01 PM »
The little shop down in Cinebar has had a LOT of H4350 lately. I picked up a keg 2 weeks ago for a buddy, sent another guy in there to pick up a keg, then I went back by there and picked up a case (10) of 1 pounders last weekend for myself and any local folks who might need some down the road. I still have half a keg that I picked up a while back as well.  If you're every down around Hwy 12 outside of Mossyrock/Morton, check in with Firemasters Firearms and see what he's got for powder on hand. It's amazing what he'll have and how much he'll have sometimes!

Never, ever does any price gouging either.  Back when there was a hording of 22lr he kept bricks, one per customer at the same price as always.  A pretty good shop for chambering and gunsmithing too.
You'll never get a Big'un if you keep shooting Little'un's.

Offline Jason

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3563
  • Location: Kalama
Re: Jason’s 338-375 Ruger Build
« Reply #85 on: April 08, 2020, 02:47:38 PM »
With the 250gr Berger’s I started with 78gr h1000 and hit pressure at 85gr.  Keep in mind I have about 4-5% more capacity than the standard 338/375R.
Thanks for the info. I have your case capacity memorized..lol

Offline Jason

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3563
  • Location: Kalama
Re: Jason’s 338-375 Ruger Build
« Reply #86 on: April 08, 2020, 06:12:37 PM »
I was able to get some shooting in last weekend. I am happy to report that all my primers went bang. I’m finally getting some nice solid groups with the Berger’s now that I’m seating them to the lands.

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6542
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Jason’s 338-375 Ruger Build
« Reply #87 on: April 08, 2020, 06:21:58 PM »
That’s good to hear
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

 


* Advertisement

* Recent Topics

Desert unit 290 October buck hunt by scottfrick
[Today at 10:36:40 AM]


New property cams checked by finnman
[Today at 10:15:48 AM]


Not quite by metlhead
[Today at 09:57:42 AM]


Wyoming elk who's in? by Gonehuntin01
[Today at 09:46:48 AM]


Mushroom ID Thread by pianoman9701
[Today at 09:45:05 AM]


Harlequin in weird places? by O. Nerka
[Today at 09:33:09 AM]


Early Huckleberry Bull Moose tag drawn! by Gonehuntin01
[Today at 09:29:55 AM]


Anyone use game carts? by dilleytech
[Today at 09:13:51 AM]


GMU 368 Nasty Creek Rd Access (Gate) by Booner
[Today at 09:13:23 AM]


East Side by BUCKHUNT
[Today at 09:00:34 AM]


Where do the bulls go? by Mtnwalker
[Today at 08:58:55 AM]


2025 deer, let's see em! by TeacherMan
[Today at 08:44:21 AM]


49 DN Moose Success by Gonehuntin01
[Today at 08:35:00 AM]


Selkirk bull moose. by JakeLand
[Today at 08:22:01 AM]


Duck Boat Blind by callturner
[Today at 07:25:58 AM]


Weyerhauser: St Helens - inscrutable? by craigapphunt
[Today at 07:21:24 AM]


Idaho on the verge of outlawing by Seabass
[Yesterday at 09:46:33 PM]


FS Surbu BFG 50 by metlhead
[Yesterday at 09:14:18 PM]


Hancock/Manulife........No Trespassing signs everywhere! What's the deal. by hunter399
[Yesterday at 09:02:11 PM]


Share your out of state experience by Alan K
[Yesterday at 08:58:56 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal