collapse

Advertisement


Author Topic: .257 Weatherby mag reloading frustrations  (Read 1575 times)

Offline gutsnthegrass

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 538
  • Location: Enumclaw
.257 Weatherby mag reloading frustrations
« on: September 30, 2019, 11:09:32 AM »
I have a Vanguard backcountry that is starting to frustrate me.  It shoots the factory 110 Accubonds great (.5 and better groups).  I have been playing around with RL22 as it seems like guys really like this powder for this cartridge.  I am seating the bullets at 3.15 COAL (this is where the factory ammo was loaded at).  I have tried doing a ladder test starting at min and working up to max.  Max gave me pressure signs.  I have also played with seating depths.  My hand loads are shooting 1.25"- 1.50" groups (unacceptable).  I Know the gun can shoot as it loves the factory stuff.  Any suggestions on what to do?  I am going to try a different powder as my next step. 

Thanks

Offline Taco280AI

  • Past Sponsor
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jan 2013
  • Posts: 2961
  • Location: FL350
Re: .257 Weatherby mag reloading frustrations
« Reply #1 on: September 30, 2019, 11:17:27 AM »
I hear great things about 7828 for the 257. Have a Backcountry as well and going to start loading for it soon.

Offline C-Money

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2008
  • Posts: 10931
  • Location: Grant County
  • Self proclaimed 3pt master
Re: .257 Weatherby mag reloading frustrations
« Reply #2 on: September 30, 2019, 11:17:40 AM »
Gave any thought to trying IMR 4831, or H1000? I seat my bullets just under max length listed in the Nosler manual. Though I have never loaded .257 WBY, I have had good luck using IMR 4831 in a 300 WBY for a friend. I load right out of the Nosler manual for most all the cartridges I load for.
I felt like a one legged cat trying to bury a terd on a frozen pond!

Offline Bob33

  • Global Moderator
  • Trade Count: (+3)
  • Legend
  • *****
  • Join Date: Apr 2009
  • Posts: 21744
  • Groups: SCI, RMEF, NRA, Hunter Education
Re: .257 Weatherby mag reloading frustrations
« Reply #3 on: September 30, 2019, 11:19:26 AM »
Buy three boxes of the factory ammo and you're good for a long time...
Nature. It's cheaper than therapy.

Offline grundy53

  • Global Moderator
  • Trade Count: (0)
  • Explorer
  • *****
  • Join Date: Mar 2010
  • Posts: 12860
  • Location: Lake Stevens
  • Learn something new everyday.
    • facebook
Re: .257 Weatherby mag reloading frustrations
« Reply #4 on: September 30, 2019, 11:21:13 AM »
I use IMR4350 for mine. This is at 200 yards.

Sent from my SM-G950U using Tapatalk
Molôn Labé
Can you skin Grizz?

The opinions expressed in my posts do not represent those of the forum.

Offline Taco280AI

  • Past Sponsor
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jan 2013
  • Posts: 2961
  • Location: FL350
Re: .257 Weatherby mag reloading frustrations
« Reply #5 on: September 30, 2019, 01:09:33 PM »
What velocity are you getting? Book shows it being pretty slow, considering it's a 257...

Offline gutsnthegrass

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 538
  • Location: Enumclaw
Re: .257 Weatherby mag reloading frustrations
« Reply #6 on: September 30, 2019, 01:36:07 PM »
What velocity are you getting? Book shows it being pretty slow, considering it's a 257...

I agree, the Nosler book shows this as a slow load (3200fps at the high end) but I would take that group.

Offline Taco280AI

  • Past Sponsor
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jan 2013
  • Posts: 2961
  • Location: FL350
Re: .257 Weatherby mag reloading frustrations
« Reply #7 on: September 30, 2019, 02:16:26 PM »
I'm looking online and Nosler says max of 59.0 with IMR4350 for 3115 with the 115 BT. From a 26" barrel too

Offline MarkTrail

  • Non-Hunting Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2015
  • Posts: 100
  • Location: Eastern washington
  • Groups: Rmef,NRA,mdf
Re: .257 Weatherby mag reloading frustrations
« Reply #8 on: September 30, 2019, 04:05:02 PM »
I have had real good results with Imr 7828 as well as h1000. 117gr Hornady bt as well as the nosler bullets. Nothing compressed but still excellent velocity. Try those powders if you are set on reloading otherwise buy your factory ammo. Good luck, it is an awesome deer sized cartridge with devastating results.

Offline grundy53

  • Global Moderator
  • Trade Count: (0)
  • Explorer
  • *****
  • Join Date: Mar 2010
  • Posts: 12860
  • Location: Lake Stevens
  • Learn something new everyday.
    • facebook
Re: .257 Weatherby mag reloading frustrations
« Reply #9 on: September 30, 2019, 05:53:38 PM »
What velocity are you getting? Book shows it being pretty slow, considering it's a 257...
I've never chrono'd it. Just did a ladder test and used the most accurate.

Sent from my SM-G950U using Tapatalk

Molôn Labé
Can you skin Grizz?

The opinions expressed in my posts do not represent those of the forum.

Offline grundy53

  • Global Moderator
  • Trade Count: (0)
  • Explorer
  • *****
  • Join Date: Mar 2010
  • Posts: 12860
  • Location: Lake Stevens
  • Learn something new everyday.
    • facebook
Re: .257 Weatherby mag reloading frustrations
« Reply #10 on: September 30, 2019, 05:55:57 PM »
I'm looking online and Nosler says max of 59.0 with IMR4350 for 3115 with the 115 BT. From a 26" barrel too
I'm shooting accubond 110's over 61 grains of IMR4350. My nosler book is showing 64 grains as max load.

Sent from my SM-G950U using Tapatalk

Molôn Labé
Can you skin Grizz?

The opinions expressed in my posts do not represent those of the forum.

Offline grundy53

  • Global Moderator
  • Trade Count: (0)
  • Explorer
  • *****
  • Join Date: Mar 2010
  • Posts: 12860
  • Location: Lake Stevens
  • Learn something new everyday.
    • facebook
Re: .257 Weatherby mag reloading frustrations
« Reply #11 on: September 30, 2019, 06:00:10 PM »
Nosler 7th edition says that the IMR4350 is the most accurate they tested.

Sent from my SM-G950U using Tapatalk

Molôn Labé
Can you skin Grizz?

The opinions expressed in my posts do not represent those of the forum.

 


* Advertisement

* Recent Topics

Norway pass Elk by Dark2Dark
[Yesterday at 11:51:46 PM]


Bear behavior by lewy
[Yesterday at 11:51:23 PM]


FFL preferences or warnings in Olympia or south Sound area? by Platensek-po
[Yesterday at 11:39:03 PM]


Boat registration by Happy Gilmore
[Yesterday at 10:22:29 PM]


Norway Pass Archery Elk 2025 by Boss .300 winmag
[Yesterday at 09:14:45 PM]


Entiat Quality tag by WAcoueshunter
[Yesterday at 09:05:06 PM]


Idaho 2025 Controlled Hunts by JDArms1240
[Yesterday at 09:03:40 PM]


Palouse/Mica (GMU 127) Access for Trades Work by dr.derek
[Yesterday at 08:29:53 PM]


Pearygin Quality by MADMAX
[Yesterday at 07:55:09 PM]


Teanaway bull elk by Caveman123
[Yesterday at 07:43:44 PM]


Oregon results posted. by Caveman123
[Yesterday at 07:40:47 PM]


2025 Draw Results by Yeti419
[Yesterday at 07:27:32 PM]


Mudflow Archery by Yeti419
[Yesterday at 07:26:25 PM]


Cowiche Quality Buck by dilleytech
[Yesterday at 07:14:35 PM]


Rehome for GWP by Feathernfurr
[Yesterday at 06:43:07 PM]


Vashon Island deer tag by bowhunter_1
[Yesterday at 04:32:43 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal