collapse

Advertisement


Author Topic: 395gr Lyman Plains bullet test  (Read 2740 times)

Offline MountainDevil54

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2012
  • Posts: 571
  • Location: Boncarbo Colorado
395gr Lyman Plains bullet test
« on: January 02, 2020, 12:22:24 PM »
Not bad at all!! 50 yards today with my Traditions St.Louis Hawken .50cal shooting a Lyman 395gr conical over 80gr Alliant Black MZ. They load very nice! Snug at the top loading band and then go right down with a little resistance. No swabbing was needed to sustain accuracy, which is great for hunting in case you need another shot or 2. First 3 shots then a total of 5. Next up, I will run it out to 100 yards and see how low she shoots.I'm about to guess around 6" low. Also, check out that smashed up bullet I recovered from the tires!



Offline Jeeper

  • Non-Hunting Topics
  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Sep 2011
  • Posts: 84
  • Location: Salmon Creek, WA
Re: 395gr Lyman Plains bullet test
« Reply #1 on: January 03, 2020, 04:27:44 PM »
I use the 450 Grain Lyman Plains bullet in my .54 TC Renegade. I have the mold. Green Mtn conical twist barrel. Awesome bullet!  My elk two yeas ago just folded and dropped!

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 9008
  • Location: In Your Hunting Spot
  • Groups: NRA RMEF
Re: 395gr Lyman Plains bullet test
« Reply #2 on: January 03, 2020, 04:47:55 PM »
Those tires your shooting look brand new. :dunno:

Offline MountainDevil54

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2012
  • Posts: 571
  • Location: Boncarbo Colorado
Re: 395gr Lyman Plains bullet test
« Reply #3 on: January 03, 2020, 05:03:00 PM »
they are.

But 17 years old and full of cracks and  therefore could not be used.

Offline MountainDevil54

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2012
  • Posts: 571
  • Location: Boncarbo Colorado
Re: 395gr Lyman Plains bullet test
« Reply #4 on: January 07, 2020, 03:45:36 PM »
exact same load but I used the larger 4 1/2" red bullseye to aim at. Without a doubt this is a guaranteed accurate load! First shot I swabbed the bore completely clean, and as it shows, its aprox 1 1/2" higher then the follow 2 shots on a dirty bore. I can handle that during hunting season!

This 3 shot - 100 yard group measures 1 3/4" There is no possible way I could hope to shrink this down! I'm using a german silver front sight and a traditional lyman great plains rifle rear sight. Pretty "primitive" but I see them super clear and have had no trouble in the past with them. If anything, I will have to drift the rear sight over a touch to the left to bring the group more towards the center.

Traditions St.Louis Hawken .50cal, 28" barrel, 1:48 twist, 80gr Alliant Black MZ, 395gr Lyman Plains bullets @ 100 yards.

This group measures 1 3/4" center  to center.

 


* Advertisement

* Recent Topics

35 whelen by CP
[Today at 11:20:43 AM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by WapitiTalk1
[Today at 10:51:57 AM]


Idaho on the verge of outlawing by Tbar
[Today at 10:47:00 AM]


Four less by BeerBugler
[Today at 09:35:50 AM]


“Recreational trappers”? by Loup Loup
[Today at 08:59:35 AM]


Long Island Hunt by Sundance
[Today at 08:04:53 AM]


WA Bucket List….Mule Deer Permit by C-Money
[Today at 07:30:24 AM]


Furbearer research project, samples requested, by lewy
[Yesterday at 10:48:09 PM]


Nice bachelor herd by Dan-o
[Yesterday at 10:41:23 PM]


Coyote hunting with dogs by metlhead
[Yesterday at 08:39:32 PM]


GSP Breeders- looking for GSP puppy by SureThing
[Yesterday at 08:19:53 PM]


Such cool looking animals by Falcon
[Yesterday at 08:18:18 PM]


Big changes to skamania county boat launching by huntnnw
[Yesterday at 06:15:56 PM]


2027 Pink Run Destroyed by Happy Gilmore
[Yesterday at 02:25:10 PM]


Meet Kumpel by metlhead
[Yesterday at 12:04:28 PM]


Question about Hancock Timber Co Eastside by hunter399
[Yesterday at 12:14:09 AM]


Update repair complete Who knows Stihl messed up and cooked my 044 by Westside88
[December 19, 2025, 09:34:53 PM]


F150 Tire/Wheel Guys by elksnout
[December 19, 2025, 08:55:57 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal