Author Topic: New build (Read 4623 times)

Russ McDonald · « **on:** January 28, 2020, 10:24:07 AM »

Well I decided that I wanted to build an AR10 in .308. I have an AR15 in .223/5.56, one in 300 Black out and a .223/5.56 pistol. So far I have a Aero Precision complete lower for the AR10. What would you all suggest for an upper?

fly-by · « **Reply #1 on:** January 28, 2020, 11:20:06 AM »

An Aero M5 should fit your lower well and you can usually find blems for about $100. Just built a .243 on one with a $90 Bear Creek barrel and am happy with performance so far.

b23 · « **Reply #2 on:** January 28, 2020, 11:42:29 AM »

Quote from: Russ McDonald on January 28, 2020, 10:24:07 AM

Well I decided that I wanted to build an AR10 in .308. I have an AR15 in .223/5.56, one in 300 Black out and a .223/5.56 pistol. So far I have a Aero Precision complete lower for the AR10. What would you all suggest for an upper?

What barrel length will you be wanting to go with? I ask because I have a brand new unfired 308 take off barrel from my Seekins SP10 308 that I rebarreled with a Proof 6.5CM a few months ago. Seekins uses Rock Creek barrels and it would come with gas block and gas tube all brand new.

fly-by · « **Reply #3 on:** January 28, 2020, 11:52:01 AM »

Here's an Aero M5 with 18" Faxon pencil profile and slim handguard.

Russ McDonald · « **Reply #4 on:** January 28, 2020, 12:11:38 PM »

16 or 18" would be fine.

Sent from my SM-N976V using Tapatalk

Russ McDonald · « **Reply #5 on:** January 28, 2020, 12:12:54 PM »

Quote from: fly-by on January 28, 2020, 11:52:01 AM

Here's an Aero M5 with 18" Faxon pencil profile and slim handguard.

Sent from my SM-N976V using Tapatalk

fly-by · « **Reply #6 on:** January 28, 2020, 01:47:13 PM »

I have a couple of basic .308 handguards. Will send to you for cost of shipping.

Russ McDonald · « **Reply #7 on:** January 28, 2020, 01:51:56 PM »

Quote from: fly-by on January 28, 2020, 01:47:13 PM

I have a couple of basic .308 handguards. Will send to you for cost of shipping.

That would be awesome. Where are you at?

Sent from my SM-N976V using Tapatalk

Russ McDonald · « **Reply #8 on:** January 28, 2020, 01:53:55 PM »

Quote from: Russ McDonald on January 28, 2020, 01:51:56 PM

Quote from: fly-by on January 28, 2020, 01:47:13 PM
I have a couple of basic .308 handguards. Will send to you for cost of shipping.
That would be awesome. Where are you at?

Sent from my SM-N976V using Tapatalk

You don't have to ship. I work in North Bend. We can meet up somewhere. I will buy you your favorite beer if you would like.

fly-by · « **Reply #9 on:** January 28, 2020, 02:13:33 PM »

That's an easy one. Steam Train Porter at Snoqualmie Falls Brewery. Any afternoon or evening.

Alchase · « **Reply #10 on:** January 28, 2020, 07:28:59 PM »

Cool build.
I have wanted to build either a 6.5CM or .243 AR10, just have not get around to pulling the trigger.
I got to shoot a couple boxes out of a new Springfield Saint Victor .308 on Saturday. I had heard (from various reviews) they can hit pretty hard. I had a blast shooting it and did not think it was hard on the shoulder at all.

Russ McDonald · « **Reply #11 on:** January 29, 2020, 06:58:15 PM »

Quote from: b23 on January 28, 2020, 11:42:29 AM

Quote from: Russ McDonald on January 28, 2020, 10:24:07 AM
Well I decided that I wanted to build an AR10 in .308. I have an AR15 in .223/5.56, one in 300 Black out and a .223/5.56 pistol. So far I have a Aero Precision complete lower for the AR10. What would you all suggest for an upper?

What barrel length will you be wanting to go with? I ask because I have a brand new unfired 308 take off barrel from my Seekins SP10 308 that I rebarreled with a Proof 6.5CM a few months ago. Seekins uses Rock Creek barrels and it would come with gas block and gas tube all brand new.

Are you looking to sell?

Sent from my SM-N976V using Tapatalk

NWShooter · « **Reply #12 on:** January 29, 2020, 09:06:09 PM »

You can totally suck out with a .308. The .308 is the queen of suck, you have to neck the suck out of it. You could just pick up a barrel in 6.5 CM and rock on and stomp on the Anemic 30 cal. Forgive me for shooting the CM a boat load.

b23 · « **Reply #13 on:** January 30, 2020, 12:30:13 AM »

Quote from: Russ McDonald on January 29, 2020, 06:58:15 PM

Quote from: b23 on January 28, 2020, 11:42:29 AM
Quote from: Russ McDonald on January 28, 2020, 10:24:07 AM
Well I decided that I wanted to build an AR10 in .308. I have an AR15 in .223/5.56, one in 300 Black out and a .223/5.56 pistol. So far I have a Aero Precision complete lower for the AR10. What would you all suggest for an upper?

What barrel length will you be wanting to go with? I ask because I have a brand new unfired 308 take off barrel from my Seekins SP10 308 that I rebarreled with a Proof 6.5CM a few months ago. Seekins uses Rock Creek barrels and it would come with gas block and gas tube all brand new.
Are you looking to sell?

Sent from my SM-N976V using Tapatalk

Yes

Russ McDonald · « **Reply #14 on:** January 30, 2020, 04:40:23 AM »

Quote from: NWShooter on January 29, 2020, 09:06:09 PM

You can totally suck out with a .308. The .308 is the queen of suck, you have to neck the suck out of it. You could just pick up a barrel in 6.5 CM and rock on and stomp on the Anemic 30 cal. Forgive me for shooting the CM a boat load.

Ok but not interested in s 6.5.

Sent from my SM-N976V using Tapatalk

Russ McDonald · « **Reply #15 on:** January 30, 2020, 04:40:57 AM »

Quote from: b23 on January 30, 2020, 12:30:13 AM

Quote from: Russ McDonald on January 29, 2020, 06:58:15 PM
Quote from: b23 on January 28, 2020, 11:42:29 AM
Quote from: Russ McDonald on January 28, 2020, 10:24:07 AM
Well I decided that I wanted to build an AR10 in .308. I have an AR15 in .223/5.56, one in 300 Black out and a .223/5.56 pistol. So far I have a Aero Precision complete lower for the AR10. What would you all suggest for an upper?

What barrel length will you be wanting to go with? I ask because I have a brand new unfired 308 take off barrel from my Seekins SP10 308 that I rebarreled with a Proof 6.5CM a few months ago. Seekins uses Rock Creek barrels and it would come with gas block and gas tube all brand new.
Are you looking to sell?

Sent from my SM-N976V using Tapatalk

Yes

What you looking at for price?

Sent from my SM-N976V using Tapatalk

b23 · « **Reply #16 on:** January 30, 2020, 08:22:08 AM »

I'll send you a PM

mountainman · « **Reply #17 on:** January 31, 2020, 06:50:50 PM »

Let us all see the finished rifle! Good parts, good caliber, ...your gonna want to build more

Russ McDonald · « **Reply #18 on:** March 23, 2020, 07:22:08 AM »

Ok since all of the world is coming to end crap is going on I figured I could talk the wife into finishing up this project. She must not be feeling well because she said yes. Bear Creek 20" complete upper coming my way.

Russ McDonald · « **Reply #19 on:** March 30, 2020, 03:45:27 PM »

Here we go. Areo Precision .308 lower and a Bear Creak 20" mid weight barrel and Areo Precision upper 15" M Lok rail. Just threw some optics on it. Looking for some decent optics later on. Can't wait to shoot this.

Sent from my SM-N976V using Tapatalk

Magnum_Willys · « **Reply #20 on:** March 30, 2020, 03:47:47 PM »

Mean lookin lil devil. What scope?

Russ McDonald · « **Reply #21 on:** March 30, 2020, 03:52:28 PM »

Quote from: Magnum_Willys on March 30, 2020, 03:47:47 PM

Mean lookin lil devil. What scope?

Something German that I got off of Amazon. Was only $100. Got a couple years ago for my 300 Blk

Sent from my SM-N976V using Tapatalk

News:

Advertisement

Author Topic: New build (Read 4623 times)

Advertisement

Quick Links

Recent Topics