New build

[Russ McDonald]

Well I decided that I wanted to build an AR10 in .308.  I have an AR15 in .223/5.56, one in 300 Black out and a .223/5.56 pistol.  So far I have a Aero Precision complete lower for the AR10.  What would you all suggest for an upper?

[fly-by]

An Aero M5 should fit your lower well and you can usually find blems for about $100.  Just built a .243 on one with a $90 Bear Creek barrel and am happy with performance so far.

[b23]

Well I decided that I wanted to build an AR10 in .308.  I have an AR15 in .223/5.56, one in 300 Black out and a .223/5.56 pistol.  So far I have a Aero Precision complete lower for the AR10.  What would you all suggest for an upper?

What barrel length will you be wanting to go with?  I ask because I have a brand new unfired 308 take off barrel from my Seekins SP10 308 that I rebarreled with a Proof 6.5CM a few months ago.  Seekins uses Rock Creek barrels and it would come with gas block and gas tube all brand new.

[fly-by]

Here's an Aero M5 with 18" Faxon pencil profile and slim handguard.

[Russ McDonald]

16 or 18" would be fine.

Sent from my SM-N976V using Tapatalk

[Russ McDonald]

Here's an Aero M5 with 18" Faxon pencil profile and slim handguard.

Sent from my SM-N976V using Tapatalk

[fly-by]

I have a couple of basic .308 handguards.  Will send to you for cost of shipping.

[Russ McDonald]

I have a couple of basic .308 handguards.  Will send to you for cost of shipping.

That would be awesome.  Where are you at?

Sent from my SM-N976V using Tapatalk

[Russ McDonald]

I have a couple of basic .308 handguards.  Will send to you for cost of shipping.

That would be awesome.  Where are you at?

Sent from my SM-N976V using Tapatalk

You don't have to ship.  I work in North Bend.  We can meet up somewhere.  I will buy you your favorite beer if you would like.

[fly-by]

That's an easy one. Steam Train Porter at Snoqualmie Falls Brewery. Any afternoon or evening.

[Alchase]

Cool build.
I have wanted to build either a 6.5CM or .243 AR10, just have not get around to pulling the trigger.
I got to shoot a couple boxes out of a new Springfield Saint Victor .308 on Saturday. I had heard (from various reviews) they can hit pretty hard. I had a blast shooting it and did not think it was hard on the shoulder at all.

[Russ McDonald]

Well I decided that I wanted to build an AR10 in .308.  I have an AR15 in .223/5.56, one in 300 Black out and a .223/5.56 pistol.  So far I have a Aero Precision complete lower for the AR10.  What would you all suggest for an upper?

What barrel length will you be wanting to go with?  I ask because I have a brand new unfired 308 take off barrel from my Seekins SP10 308 that I rebarreled with a Proof 6.5CM a few months ago.  Seekins uses Rock Creek barrels and it would come with gas block and gas tube all brand new.

Are you looking to sell?

Sent from my SM-N976V using Tapatalk

[NWShooter]

You can totally suck out with a .308. The .308 is the queen of suck, you have to neck the suck out of it. You could just pick up a barrel in 6.5 CM and rock on and stomp on the Anemic 30 cal. Forgive me for shooting the CM a boat load.

[b23]

Well I decided that I wanted to build an AR10 in .308.  I have an AR15 in .223/5.56, one in 300 Black out and a .223/5.56 pistol.  So far I have a Aero Precision complete lower for the AR10.  What would you all suggest for an upper?

What barrel length will you be wanting to go with?  I ask because I have a brand new unfired 308 take off barrel from my Seekins SP10 308 that I rebarreled with a Proof 6.5CM a few months ago.  Seekins uses Rock Creek barrels and it would come with gas block and gas tube all brand new.

Are you looking to sell?

Sent from my SM-N976V using Tapatalk

Yes

[Russ McDonald]

You can totally suck out with a .308. The .308 is the queen of suck, you have to neck the suck out of it. You could just pick up a barrel in 6.5 CM and rock on and stomp on the Anemic 30 cal. Forgive me for shooting the CM a boat load.

Ok but not interested in s 6.5.

Sent from my SM-N976V using Tapatalk