collapse

Advertisement


Author Topic: Let the building begin  (Read 22338 times)

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Re: Let the building begin
« Reply #15 on: February 05, 2020, 07:52:15 PM »
You know what you could do?  You could push a 26 Nosler reamer into your barrel about .150" deeper and headspace off of a 338 RUM go gage and have yourself a 26 Boondoogle! It would essentially be a 6.5 Badger with a 35° shoulder that would let you use standard 26 Nosler dies. Then you can pick up some ADG 338 RUM brass and have some REAL fun. :tup:

Look at me helping!  :chuckle:

Just be sure to put plenty of sand in the barrel threads and pull a length of 40 weight barbed wire through the barrel to keep in line with the original Boondoogle.

Ouch! :chuckle:

I should have just thrown one of my Boondoogle barrels on an action and pawned it off on Jolten. Then it can be his problem and I can move on to the next failed project! :tup: :IBCOOL:

Offline Jolten

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Jan 2013
  • Posts: 843
  • Location: Yakima, WA
Re: Let the building begin
« Reply #16 on: February 06, 2020, 06:39:16 AM »
You know what you could do?  You could push a 26 Nosler reamer into your barrel about .150" deeper and headspace off of a 338 RUM go gage and have yourself a 26 Boondoogle! It would essentially be a 6.5 Badger with a 35° shoulder that would let you use standard 26 Nosler dies. Then you can pick up some ADG 338 RUM brass and have some REAL fun. :tup:

Look at me helping!  :chuckle:

Just be sure to put plenty of sand in the barrel threads and pull a length of 40 weight barbed wire through the barrel to keep in line with the original Boondoogle.

Ouch! :chuckle:

I should have just thrown one of my Boondoogle barrels on an action and pawned it off on Jolten. Then it can be his problem and I can move on to the next failed project! :tup: :IBCOOL:

Feel free I could use a good looking paperweight ;)
The best equipment in the world is useless to the idiot who doesn't understand it.

Offline elkaholic123

  • Political & Covid-19 Topics
  • Trade Count: (+10)
  • Sourdough
  • *****
  • Join Date: Jun 2008
  • Posts: 1786
  • Location: Lake Stevens
  • Groups: Montana Dirty Dozen,Life member RMEF,NAHC, WSF
Re: Let the building begin
« Reply #17 on: February 06, 2020, 07:48:03 AM »
Transforming a Savage 110 270win into a 26 nosler.

-Recoil lug
- McGowen prefit barrel
     - 28"
     - Sendero contour
     - 1-8" twist
     - 26 Nosler
     - Savage small shank threads
     - muzzle threaded 5/8x24
     - 5/8x24 turbo-brake
- DBM bottom metal with 1 magazine
- Boyd's At-One stock
- Timney trigger

Hoping to use Barnes 127gr LRX at roughly 3600fps. Big shout out to York for talking a newbie through all this. Should be a fun first build.
What powder are you planning on trying? I had good results with US869 and Retumbo  :twocents:
elkaholic

Offline Jolten

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Jan 2013
  • Posts: 843
  • Location: Yakima, WA
Re: Let the building begin
« Reply #18 on: February 06, 2020, 08:52:44 AM »
I figured I'd tryout 869 first and see what happens. Primers not quite settled on yet
The best equipment in the world is useless to the idiot who doesn't understand it.

Offline Jolten

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Jan 2013
  • Posts: 843
  • Location: Yakima, WA
Re: Let the building begin
« Reply #19 on: February 08, 2020, 08:42:42 PM »
If anyone has an accutrigger they're not using I might be interested in it. If I can figure out a way to swap it anyway.
The best equipment in the world is useless to the idiot who doesn't understand it.

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5606
Re: Let the building begin
« Reply #20 on: February 09, 2020, 02:49:18 PM »
I have had great luck with McGowen.  Hope yours is great too!

Have you tried the turbobrake of theirs yet?
nope. I’m a terminator guy

Have used MBM, Terminator 4, and now the Fat Lil B** Gen 3 - really liking it.  Tuned the top ports until muzzle lift was zero.   Think the Larger FB Gen 3 is my next brake.  Not a big deal with little calibers and heavy barrels but big guns and whippy barrels its nice to be able to tune. 

Offline Jolten

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Jan 2013
  • Posts: 843
  • Location: Yakima, WA
Re: Let the building begin
« Reply #21 on: February 09, 2020, 05:00:26 PM »
I have had great luck with McGowen.  Hope yours is great too!

Have you tried the turbobrake of theirs yet?
nope. I’m a terminator guy

Have used MBM, Terminator 4, and now the Fat Lil B** Gen 3 - really liking it.  Tuned the top ports until muzzle lift was zero.   Think the Larger FB Gen 3 is my next brake.  Not a big deal with little calibers and heavy barrels but big guns and whippy barrels its nice to be able to tune. 

Yes shouldn't be too much muzzle rise with my set up I'd think
The best equipment in the world is useless to the idiot who doesn't understand it.

Offline Jolten

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Jan 2013
  • Posts: 843
  • Location: Yakima, WA
Re: Let the building begin
« Reply #22 on: March 04, 2020, 06:14:21 PM »
Trying to decide if I want a 20moa base and what optic to run. It's for up to 600yards for deer rifle. Thinking maybe a 6-24x? Any input
The best equipment in the world is useless to the idiot who doesn't understand it.

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5606
Re: Let the building begin
« Reply #23 on: March 06, 2020, 12:11:27 PM »
Trying to decide if I want a 20moa base and what optic to run. It's for up to 600yards for deer rifle. Thinking maybe a 6-24x? Any input

budget?  Nightforce SHV 5-20 for $1200 ?

Offline Jolten

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Jan 2013
  • Posts: 843
  • Location: Yakima, WA
Re: Let the building begin
« Reply #24 on: March 07, 2020, 04:51:53 PM »
Trying to decide if I want a 20moa base and what optic to run. It's for up to 600yards for deer rifle. Thinking maybe a 6-24x? Any input

budget?  Nightforce SHV 5-20 for $1200 ?

Trying to keep the total cost below 2k if possible. I'm looking in the sub $800 range but won't rule it out
The best equipment in the world is useless to the idiot who doesn't understand it.

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31529
  • Location: Goldendale,WA
Re: Let the building begin
« Reply #25 on: March 07, 2020, 04:58:56 PM »
I can hook you up with some killer prices on leupold if you choose to go that route and stay in right at or close to your budget.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline Jolten

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Jan 2013
  • Posts: 843
  • Location: Yakima, WA
Re: Let the building begin
« Reply #26 on: March 07, 2020, 05:50:38 PM »
Thanks Carp. I'll keep that in mind.
The best equipment in the world is useless to the idiot who doesn't understand it.

Offline Jolten

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Jan 2013
  • Posts: 843
  • Location: Yakima, WA
Re: Let the building begin
« Reply #27 on: March 28, 2020, 10:21:16 PM »
Well barrel should be here any day now. Debating on if I should use the factory recoil lug or order one in. Also thinking of staying with the Boyd's stock or switch ya chassis system...
The best equipment in the world is useless to the idiot who doesn't understand it.

Offline Jason

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3562
  • Location: Kalama
Re: Let the building begin
« Reply #28 on: March 28, 2020, 10:38:17 PM »
Well barrel should be here any day now. Debating on if I should use the factory recoil lug or order one in. Also thinking of staying with the Boyd's stock or switch ya chassis system...
I would buy a precision ground recoil lug and a barrel nut. I bought mine from NSS.

http://northlandshooterssupply.com/parts/nss-upgrades/


Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6539
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Let the building begin
« Reply #29 on: March 29, 2020, 05:16:48 AM »
:yeah:
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

 


* Advertisement

* Recent Topics

Mt. St. Helens Goat by CNELK
[Today at 10:21:34 PM]


Selling Pistols and rifles by Rat44
[Today at 09:45:29 PM]


Apps per Tag for Muzzy Elk by High Climber
[Today at 09:21:16 PM]


Muzzleloader Scope by Dan-o
[Today at 08:24:45 PM]


Ross Lake boat launch? by Oldguy
[Today at 08:14:32 PM]


Gots me a new/old rockchuck rifle coming by JDHasty
[Today at 07:54:20 PM]


Muzzleloader scope options by trophyhunt
[Today at 06:13:21 PM]


AUCTION: Custom knife by Alden Cole by Dan-o
[Today at 05:59:26 PM]


Lots of coho by baldopepper
[Today at 05:57:42 PM]


newbie bear field dressing and hide by KNOPHISH
[Today at 05:21:23 PM]


GMU 247 Entiat bear hunting by jstone
[Today at 04:58:38 PM]


More Kings! by Crunchy
[Today at 04:38:57 PM]


Spot lock in the salt? by GWP
[Today at 08:04:10 AM]


Anybody breeding meat rabbit? by HighlandLofts
[Today at 02:36:05 AM]


Wall Tents Tips and Tricks by ghosthunter
[Yesterday at 10:33:57 PM]


2025 Washington Rocky Mountain Bighorn Sheep Raffle by trophyhunt
[Yesterday at 08:15:41 PM]


Calling in August in Western Washington by bearmanric
[Yesterday at 06:43:42 PM]


Nice bull? by Kingofthemountain83
[Yesterday at 06:01:05 PM]


Tease 'l' by kellama2001
[Yesterday at 12:09:30 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal