Knife making is becoming my 3rd hobby

[JJB11B]

I’ve been into making knives for a while but I’m really getting into it. Just finished this one on the cork board today

[Buckhunter24]

Those look great, have you tried antler for handle?

[JJB11B]

Those look great, have you tried antler for handle?

i have not, I don’t have any good antlers for making handles, haven’t got around to buying antlers yet, I’m sure someday I will

[Boss .300 winmag]

Those are some really nice knifes.👍

[Buckhunter24]

 

[Tracker0721]

I really like those blade profiles! Very nice

[lewy]

Those look great 👍

[Badhabit]

Do you do Damscus yet? Really wanting a 7" chef knife.

[Bango skank]

Those look great, have you tried antler for handle?

i have not, I don’t have any good antlers for making handles, haven’t got around to buying antlers yet, I’m sure someday I will

No need to buy em, theres plenty just laying around on the ground.

[The100Road]

Awesome! Let me know if you ever need any stabilized knife scales or hybrid wood/resin scales. I make them and sell/trade quite a bit.

[JJB11B]

Awesome! Let me know if you ever need any stabilized knife scales or hybrid wood/resin scales. I make them and sell/trade quite a bit.

I would love to buy some stuff from you! all about supporting local where I can.

[JJB11B]

Do you do Damscus yet? Really wanting a 7" chef knife.

I have the metals set aside to do it, I am waiting until I am more confident in my forge welding, ruining a stack of 15n20 and 1084 is expensive and a loss of a lot of time. I have been playing with making 5160 and mild steel san mai. I am going to make a billet of 5160 and 15n20 to make a big bowie and a camp chopper out of.

[JJB11B]

is Wazukie still around? we haunted another website together and I seem to remember him making knives too

[JJB11B]

From a hunk of mild steel, for once the forge weld went right the first time with no finnicking around! The bit is forged out of a piece of .270x2” 1084, I forged it down to about 1” wide and somewhere about 3/8” thick then forged in the taper. This project took way too much time and propane. I learned more on this project than any of my previous ones. I modified some of my tools and built some new ones. Made my best axe handle yet! Bought the board from local shop that milled the lumber here in my home town. Kinda cool to see something all locally made. The handle is 20” long

[CoryTDF]

Shotty workmanship and poor quality. I'll come grab it from you tonight so you don't have to look at it and so other people wont have to see it in your shop. 

Nice work man!