collapse

Advertisement


Author Topic: cool bot - a quick question  (Read 4041 times)

Offline KFhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Jan 2011
  • Posts: 34512
  • Location: NE Corner
cool bot - a quick question
« on: April 14, 2020, 11:18:03 AM »
Can I run multiple units off a single cool bot?   I was thinking three larger size window AC units.

Is there another product I should look at?

Offline baker5150

  • Past Sponsor
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Feb 2012
  • Posts: 3293
  • Groups: Loser's Lounge - Lifetime Member
Re: cool bot - a quick question
« Reply #1 on: April 14, 2020, 11:23:11 AM »
I don't see how its possible with only 1 sensor.

Why do you want to run 3 units?  Instead of just one larger one?

Offline KFhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Jan 2011
  • Posts: 34512
  • Location: NE Corner
Re: cool bot - a quick question
« Reply #2 on: April 14, 2020, 11:27:31 AM »
My shop is very well insulated, but it's a big area and I butcher beef in it.   

Instead of building an addon just for cold storage and hanging meat,  I thought might as well just cool the whole shop. 


It's hard to get my helpers lined up and have the right weather for hanging beef for 14 days,  too many factors could go wrong during that time. 


I been lucky so far since the shop holds temps so well,  but a 4 day warm snap while my beef is hanging would get me nervous.


one AC unit would most likely be enough with a fall butchering,  but if I got a cow messed up in August and wanted to salvage her....

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 13162
  • Location: Arlington
Re: cool bot - a quick question
« Reply #3 on: April 14, 2020, 11:27:54 AM »
Quote
Can I use one °CoolBot for two A/Cs?
No. You do need a separate °CoolBot for each air conditioner, as each A/C will cycle and freeze up at different rates.

Offline KFhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Jan 2011
  • Posts: 34512
  • Location: NE Corner
Re: cool bot - a quick question
« Reply #4 on: April 14, 2020, 11:31:26 AM »
Quote
Can I use one °CoolBot for two A/Cs?
No. You do need a separate °CoolBot for each air conditioner, as each A/C will cycle and freeze up at different rates.

Thanks


hmm

I see they have a wifi thing now, looks like it'll be $399 x3   + 3 AC units 


Offline HillHound

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2019
  • Posts: 1698
  • Location: Central Washington
  • Groups: NRA, RMEF
Re: cool bot - a quick question
« Reply #5 on: April 14, 2020, 12:42:56 PM »
What if you use some of the Styrofoam insulation sheeting to wall off part of the shop? The R rating on some of those is super high and I think you could just box in the corner of the shop with the one AC unit and not have to actually cool the entire shop. Then when you’re not hanging meat pull the sheeting down and stack it back up in the rafters somewhere until you need it again

Offline KFhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Jan 2011
  • Posts: 34512
  • Location: NE Corner
Re: cool bot - a quick question
« Reply #6 on: April 14, 2020, 12:49:32 PM »
ya


except I don't have any rafters,  the bottoms of the rafters are sheated and insulated above, like a house attic.







Offline HUNTINCOUPLE

  • Lost Somewhere on the Praire of Klickitat Co. Chasing The Elusive BENCHLEG DEERS.
  • Non-Hunting Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Jan 2009
  • Posts: 8161
  • Location: Lyle WA, 98635
  • Yep, my avatar is from my front porch. #2835
Re: cool bot - a quick question
« Reply #7 on: April 14, 2020, 01:07:59 PM »
INKBIRD makes a controller like Coolbot for about 35$.
Slap some bacon on a biscut and lets go, were burrnin daylight!

Most peoples health is a decision not a condition?

Kill your television!  ICEMAN SAID TO!

Life Member of Hunting  Washington  Forum.

Time in the woods is more important than timing the moon.

Offline KFhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Jan 2011
  • Posts: 34512
  • Location: NE Corner
Re: cool bot - a quick question
« Reply #8 on: April 14, 2020, 01:17:24 PM »
INKBIRD makes a controller like Coolbot for about 35$.
And this is why I started this thread!

Thank you

Sent from my SM-G965U using Tapatalk

Offline HUNTINCOUPLE

  • Lost Somewhere on the Praire of Klickitat Co. Chasing The Elusive BENCHLEG DEERS.
  • Non-Hunting Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Jan 2009
  • Posts: 8161
  • Location: Lyle WA, 98635
  • Yep, my avatar is from my front porch. #2835
Re: cool bot - a quick question
« Reply #9 on: April 14, 2020, 01:19:30 PM »
INKBIRD makes a controller like Coolbot for about 35$.
And this is why I started this thread!

Thank you

Sent from my SM-G965U using Tapatalk


 :tup:  Anytime!
« Last Edit: April 14, 2020, 01:33:35 PM by HUNTINCOUPLE »
Slap some bacon on a biscut and lets go, were burrnin daylight!

Most peoples health is a decision not a condition?

Kill your television!  ICEMAN SAID TO!

Life Member of Hunting  Washington  Forum.

Time in the woods is more important than timing the moon.

Offline msg

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2015
  • Posts: 107
  • Location: SW WA.
    • NA
  • Groups: NA
Re: cool bot - a quick question
« Reply #10 on: June 07, 2020, 12:37:19 PM »
How large of an ac unit will the Inkbird work with ?

Offline bearpaw

  • Family, Friends, Outdoors
  • Administrator
  • Trade Count: (+10)
  • Legend
  • *****
  • Join Date: Apr 2009
  • Posts: 38888
  • Location: Idaho<->Colville
  • "Rather Be Cougar Huntin"
    • http://www.facebook.com/DaleDenney
    • Bearpaw Outfitters
  • Groups: NRA, SCI, F4WM, NWTF, IOGA, MOGA, CCOC, BBB, RMEF, WSTA, WSB
Americans are systematically advocating, legislating, and voting away each others rights. Support all user groups & quit losing opportunity!

http://bearpawoutfitters.com Guided Hunts, Unguided, & Drop Camps in Idaho, Montana, Utah, and Wash. Hunts with tags available (no draw needed) for spring bear, fall bear, bison, cougar, elk, mule deer, turkey, whitetail, & wolf! http://trophymaps.com DIY Hunting Maps are also offered

Offline msg

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2015
  • Posts: 107
  • Location: SW WA.
    • NA
  • Groups: NA
Re: cool bot - a quick question
« Reply #12 on: June 08, 2020, 07:03:45 PM »
May not be the right spot but I have to know. I see 1 to 2 year old frozen meat getting dumped. If you google frozen meat it will tell you that if done properly it will last indefinitly.I have been eating 4 to 5 year old meat for a very long time. No different from the new stuff ?

Offline KFhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Jan 2011
  • Posts: 34512
  • Location: NE Corner
Re: cool bot - a quick question
« Reply #13 on: June 08, 2020, 07:08:09 PM »
yup, I've ate some pretty old stuff too. 

seal a meal bags and gentle handling can really add storage life.   If you have kids banging around meat getting holes in the bags, not so long  :chuckle:

Offline millerwheeler

  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Jun 2014
  • Posts: 1528
  • Location: Spanaway
  • Get out and put some miles on those boots
Re: cool bot - a quick question
« Reply #14 on: June 08, 2020, 07:12:04 PM »
Tagged

 


* Advertisement

* Recent Topics

2025 deer, let's see em! by Twispriver
[Today at 07:18:18 AM]


New scope or not? by Sneaky
[Today at 07:02:05 AM]


Making memories by boneaddict
[Today at 06:17:16 AM]


What gmu's in sw Washington hold elk? by jhouckwsu
[Today at 05:38:12 AM]


Question about hunting wilderness areas by Threewolves
[Today at 04:01:56 AM]


Nevada bull hunt 2025 by andrew_in_idaho
[Yesterday at 11:58:20 PM]


Called about Returned Alta Buck Permit by Shrimper
[Yesterday at 10:17:51 PM]


My Entiat Late tag thread by Lapua338
[Yesterday at 09:46:32 PM]


Pouge unit help by Bone collector 13
[Yesterday at 08:57:11 PM]


Idaho unit 10A by Naches Sportsman
[Yesterday at 08:44:27 PM]


Any MT deer updates? by Britt-dog
[Yesterday at 08:32:50 PM]


Grizzly? by WapitiTalk1
[Yesterday at 07:38:21 PM]


Smith-Reynolds American Legion Post #14 Fall Raffle by Stein
[Yesterday at 07:35:27 PM]


Cash Poor/Equity Rich And Don't Want To Refinance by pianoman9701
[Yesterday at 07:13:04 PM]


Palouse buck deer by high_hunter
[Yesterday at 06:27:11 PM]


What pond creature am I dealing with here? by Barehunter
[Yesterday at 06:16:30 PM]


2025 Quality Chewuch Tag by Schmalzfam
[Yesterday at 05:53:47 PM]


What are some good 12 ga factory loads for predators? by fowl smacker
[Yesterday at 05:29:34 PM]


cougar calling locations by MADMAX
[Yesterday at 05:06:42 PM]


121 Quality November 20-24 by ladder85
[Yesterday at 04:57:59 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal