collapse

Advertisement


Author Topic: Ultrasonic Cleaning Solution  (Read 1750 times)

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 51553
  • Location: E. WA
Ultrasonic Cleaning Solution
« on: December 04, 2020, 03:57:45 PM »
What do you use, especially homebrew recipes?


Thanks.

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 13147
  • Location: Arlington
Re: Ultrasonic Cleaning Solution
« Reply #1 on: December 04, 2020, 04:02:59 PM »
I don't remember where I read it, but I use Krud kutter in the red bottle and it's been working great for several years now for everything from carbs to firearm parts to tools and auto stuff.

If it's aluminum, I don't leave it in for very long, maybe 30 minutes tops.  I also only add an ounce or two to hot water to fill the tank.

https://www.lowes.com/pd/Krud-Kutter-32-fl-oz-All-Purpose-Cleaner/50296427

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7211
  • Location: Mukilteo
Re: Ultrasonic Cleaning Solution
« Reply #2 on: December 04, 2020, 04:19:30 PM »
Dawn works great.  Avoid acidic solutions; brass comes out nice and bright, but quickly corrodes.


Offline Encore 280

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 1995
  • Location: Poulsbo
  • Groups: Encore 280
Re: Ultrasonic Cleaning Solution
« Reply #3 on: December 04, 2020, 04:24:17 PM »
I use Super Clean on my front stuffer and it really gets the crap out and off of pieces. Great stuff. :tup:

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 51553
  • Location: E. WA
Re: Ultrasonic Cleaning Solution
« Reply #4 on: December 05, 2020, 02:37:46 AM »
I don't remember where I read it, but I use Krud kutter in the red bottle and it's been working great for several years now for everything from carbs to firearm parts to tools and auto stuff.

If it's aluminum, I don't leave it in for very long, maybe 30 minutes tops.  I also only add an ounce or two to hot water to fill the tank.

https://www.lowes.com/pd/Krud-Kutter-32-fl-oz-All-Purpose-Cleaner/50296427

Glock Talk was first link that comes up talking about the stuff.  Apparently, it is citric acid based, like Lemi Shine that people rave about.

I used a bit of vingear and Dawn, and it seems to do OK.

Dawn works great.  Avoid acidic solutions; brass comes out nice and bright, but quickly corrodes.

I will be rinsing it adequately, and they are deprimed, so residual acid is not a worry.

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3324
  • Location: Spokane Wa.
Re: Ultrasonic Cleaning Solution
« Reply #5 on: December 05, 2020, 09:40:25 AM »
I don't know what the affects are in an ultrasonic but my experience using Lemi Shine in a wet tumbler is less works MUCH better than does more.  Just a tiny tiny sprinkle of that stuff in my tumbler with Dawn works great and it'll make the nastiest brass bright and shiny but a tiny bit to much Lemi Shine and the brass comes out dull and looking like shat.  So if you're using Lemi Shine and you aren't getting the results you'd like try using less of it.

Offline M_ray

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Oct 2007
  • Posts: 4599
  • Location: I'm takin the 5th on this one
Re: Ultrasonic Cleaning Solution
« Reply #6 on: December 05, 2020, 10:40:19 AM »
I've used a few different things, the Hornady one shot to me leaves a film that quickly started to tarnish and dull. So I went to a home recipe of dawn soap and a tiny bit of lemi shine. If you are getting corrosion after then you're using too much Lemi shine or not rinsing it well enough or both. For Fn7 brass Water and simple green only.
DISCLAIMER: The opinions expressed here are not those of HW Management, Admins, Mods or Myself... But they are the opinions of Elvis who has revealed them to me through the medium of my pet hamster, Lee Harvey Oswald...


MB

Growing old is mandatory ... Growing up is optional!

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 13147
  • Location: Arlington
Re: Ultrasonic Cleaning Solution
« Reply #7 on: December 05, 2020, 11:08:39 AM »
I will clarify I don't use the ultrasonic for brass, I use the standard vibrating thing with walnut husk.  I've never put brass cases in Krud Kutter, so can't comment on whether it works or not.

 


* Advertisement

* Recent Topics

2025 blacktail rut thread by redi
[Today at 09:35:29 AM]


Skagit Question by JBG
[Today at 09:35:09 AM]


Getting the hang of hanging on to mallards! by JBG
[Today at 09:33:34 AM]


A legend passed :( by Machias
[Today at 09:26:39 AM]


Flynn’s 1st rooster!!! by C-Money
[Today at 09:02:23 AM]


GMU 368 Nasty Creek Rd Access (Gate) by stickflngr
[Today at 08:45:51 AM]


Chinook run by buglebuster
[Today at 08:39:03 AM]


2025 elk success thread!! by buglebuster
[Today at 08:31:55 AM]


King of the mountain caught sleeping by TeacherMan
[Today at 08:22:47 AM]


GM 6.6l gas 6 speed vs. 10 speed? by HntnFsh
[Today at 07:11:37 AM]


Anyone own a Hewescraft Sportsman 160? by FlyFish360
[Today at 06:48:21 AM]


How much do you think my truck is worth? by FlyFish360
[Today at 02:06:54 AM]


Bullet performance 2025? by Rigby416
[Today at 12:28:20 AM]


SPIKE??? by pashok23
[Yesterday at 10:24:51 PM]


Manulife (Hancock) Land Closures by MMCCAULEY
[Yesterday at 08:25:39 PM]


Where do the bulls go? by JWBINX
[Yesterday at 05:57:19 PM]


GMU 111 Aladdin Moose Hunt 2025! by teanawayslayer
[Yesterday at 04:52:10 PM]


2025 General Season Rifle Hunt VIDEO. by DWAT
[Yesterday at 02:37:49 PM]


Pathfinder's Opening Day Deer by Pathfinder101
[Yesterday at 02:32:42 PM]


2025 deer, let's see em! by jason stevens
[Yesterday at 02:06:24 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal