collapse

Advertisement


Author Topic: Mr.Heater Big Buddy Oil in lines issue.  (Read 10600 times)

Offline HUNTINCOUPLE

  • Lost Somewhere on the Praire of Klickitat Co. Chasing The Elusive BENCHLEG DEERS.
  • Non-Hunting Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Jan 2009
  • Posts: 8146
  • Location: Lyle WA, 98635
  • Yep, my avatar is from my front porch. #2835
Re: Mr.Heater Big Buddy Oil in lines issue.
« Reply #15 on: December 21, 2020, 09:38:56 AM »
Thanks for the heads up about adding a filter. I'd always been under the impression most all propane tanks are clean ? This might explain an older two burner stove I had failed and never knew why and just chocked it up to old age.  Just picked up two new Buddy heaters and don't want to have the same issue.

It’s not the tank, it’s the hose. Most hoses contain plasticisers in the rubber to keep them pliable. The high pressure of the propane in the hose pulls hose plasticisers out of the rubber. I use the hose from mr heater thst doesn’t contain plasticisers and don’t have a problem.


Thanks for the info. Can't wait to use the new word Plasticisers at camp!! :chuckle:
Slap some bacon on a biscut and lets go, were burrnin daylight!

Most peoples health is a decision not a condition?

Kill your television!  ICEMAN SAID TO!

Life Member of Hunting  Washington  Forum.

Time in the woods is more important than timing the moon.

Offline follow maggie

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3323
  • Location: Fargo
  • Just me, just being a nomad
Re: Mr.Heater Big Buddy Oil in lines issue.
« Reply #16 on: December 21, 2020, 11:54:34 AM »
Thanks for the heads up about adding a filter. I'd always been under the impression most all propane tanks are clean ? This might explain an older two burner stove I had failed and never knew why and just chocked it up to old age.  Just picked up two new Buddy heaters and don't want to have the same issue.

It’s not the tank, it’s the hose. Most hoses contain plasticisers in the rubber to keep them pliable. The high pressure of the propane in the hose pulls hose plasticisers out of the rubber. I use the hose from mr heater thst doesn’t contain plasticisers and don’t have a problem.


Thanks for the info. Can't wait to use the new word Plasticisers at camp!! :chuckle:

😁😁

 


* Advertisement

* Recent Topics

45 Winchester Magnum by poor_choices
[Today at 07:01:02 PM]


1993 Merc issues getting up on plane by JKEEN33
[Today at 06:49:08 PM]


Jupiter Mountain Rayonier Permit- 621 Bull Tag by zwickeyman
[Today at 05:34:55 PM]


North Peninsula Salmon Fishing by Crunchy
[Today at 03:21:50 PM]


erronulvin trail cam photos by kodiak06
[Today at 02:37:40 PM]


Unit 364 Archery Tag by pcveen
[Today at 12:24:46 PM]


Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by lewy
[Today at 10:30:15 AM]


If you've been following.... by timberfaller
[Today at 09:05:13 AM]


Area 11 2025 - Well? by BLH69
[Today at 08:58:57 AM]


2025 Quality Chewuch Tag by mountainman
[Today at 08:48:35 AM]


Willapa Hills 1 Bear by Clearcut
[Today at 08:40:55 AM]


1st Quality Deer tag in Washington and its a muzzleloader tag by raydog
[Today at 07:56:07 AM]


2024 deer. Let’s see um! by dreadi
[Today at 12:02:30 AM]


wyoming pronghorn draw by 280ackley
[Yesterday at 10:22:47 PM]


10 years ago- Now by Ridgerunner
[Yesterday at 09:49:05 PM]


Sockeye Numbers by Southpole
[Yesterday at 08:08:59 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal