collapse

Advertisement


Author Topic: Mr.Heater Big Buddy Oil in lines issue.  (Read 11349 times)

Offline HUNTINCOUPLE

  • Lost Somewhere on the Praire of Klickitat Co. Chasing The Elusive BENCHLEG DEERS.
  • Non-Hunting Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Jan 2009
  • Posts: 8149
  • Location: Lyle WA, 98635
  • Yep, my avatar is from my front porch. #2835
Re: Mr.Heater Big Buddy Oil in lines issue.
« Reply #15 on: December 21, 2020, 09:38:56 AM »
Thanks for the heads up about adding a filter. I'd always been under the impression most all propane tanks are clean ? This might explain an older two burner stove I had failed and never knew why and just chocked it up to old age.  Just picked up two new Buddy heaters and don't want to have the same issue.

It’s not the tank, it’s the hose. Most hoses contain plasticisers in the rubber to keep them pliable. The high pressure of the propane in the hose pulls hose plasticisers out of the rubber. I use the hose from mr heater thst doesn’t contain plasticisers and don’t have a problem.


Thanks for the info. Can't wait to use the new word Plasticisers at camp!! :chuckle:
Slap some bacon on a biscut and lets go, were burrnin daylight!

Most peoples health is a decision not a condition?

Kill your television!  ICEMAN SAID TO!

Life Member of Hunting  Washington  Forum.

Time in the woods is more important than timing the moon.

Offline follow maggie

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3323
  • Location: Fargo
  • Just me, just being a nomad
Re: Mr.Heater Big Buddy Oil in lines issue.
« Reply #16 on: December 21, 2020, 11:54:34 AM »
Thanks for the heads up about adding a filter. I'd always been under the impression most all propane tanks are clean ? This might explain an older two burner stove I had failed and never knew why and just chocked it up to old age.  Just picked up two new Buddy heaters and don't want to have the same issue.

It’s not the tank, it’s the hose. Most hoses contain plasticisers in the rubber to keep them pliable. The high pressure of the propane in the hose pulls hose plasticisers out of the rubber. I use the hose from mr heater thst doesn’t contain plasticisers and don’t have a problem.


Thanks for the info. Can't wait to use the new word Plasticisers at camp!! :chuckle:

😁😁

 


* Advertisement

* Recent Topics

Colockum Archery Bull Tag by redi
[Today at 12:10:16 PM]


Blue Tongue and EHD outbreak in NE Washington by baldopepper
[Today at 11:25:44 AM]


MA 7 Subarea 5 Year Round Salmon Closure by Stein
[Today at 11:15:45 AM]


Disappearing ink. by vandeman17
[Today at 10:43:58 AM]


Starlink Standby Mode by CarbonHunter
[Today at 10:02:10 AM]


MA-10 Coho by birdshooter1189
[Today at 08:55:57 AM]


WA Moose scouting by Pegasus
[Today at 08:41:42 AM]


Youth hunt by metlhead
[Today at 07:32:40 AM]


WDFW LICENSE / POLICY CONTACT by Cougartail
[Today at 06:09:57 AM]


Out of state app/website for notifications?? by trophyhunt
[Today at 06:04:09 AM]


My first cartridge by Rat44
[Today at 05:01:09 AM]


Any Luck With Used Dies ? by Rat44
[Today at 04:56:35 AM]


2021 bear had been previously shot before I killed him by zwickeyman
[Today at 04:31:51 AM]


2025 elk success thread!! by Cylvertip
[Yesterday at 11:39:12 PM]


Blacktail set by redi
[Yesterday at 11:08:03 PM]


Pasco bow range by bearhunter99
[Yesterday at 10:25:59 PM]


2025 deer, let's see em! by andrew_in_idaho
[Yesterday at 09:45:49 PM]


Douglas 108 Moose tag by Bonehuntn
[Yesterday at 09:21:48 PM]


WA Bucket List….Mule Deer Permit by muleyslayer
[Yesterday at 08:31:59 PM]


Proposal fot new license rule by bigtex
[Yesterday at 08:02:49 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal