collapse

Advertisement


Author Topic: Mr.Heater Big Buddy Oil in lines issue.  (Read 11997 times)

Offline HUNTINCOUPLE

  • Lost Somewhere on the Praire of Klickitat Co. Chasing The Elusive BENCHLEG DEERS.
  • Non-Hunting Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Jan 2009
  • Posts: 8165
  • Location: Lyle WA, 98635
  • Yep, my avatar is from my front porch. #2835
Re: Mr.Heater Big Buddy Oil in lines issue.
« Reply #15 on: December 21, 2020, 09:38:56 AM »
Thanks for the heads up about adding a filter. I'd always been under the impression most all propane tanks are clean ? This might explain an older two burner stove I had failed and never knew why and just chocked it up to old age.  Just picked up two new Buddy heaters and don't want to have the same issue.

It’s not the tank, it’s the hose. Most hoses contain plasticisers in the rubber to keep them pliable. The high pressure of the propane in the hose pulls hose plasticisers out of the rubber. I use the hose from mr heater thst doesn’t contain plasticisers and don’t have a problem.


Thanks for the info. Can't wait to use the new word Plasticisers at camp!! :chuckle:
Slap some bacon on a biscut and lets go, were burrnin daylight!

Most peoples health is a decision not a condition?

Kill your television!  ICEMAN SAID TO!

Life Member of Hunting  Washington  Forum.

Time in the woods is more important than timing the moon.

Offline follow maggie

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3323
  • Location: Fargo
  • Just me, just being a nomad
Re: Mr.Heater Big Buddy Oil in lines issue.
« Reply #16 on: December 21, 2020, 11:54:34 AM »
Thanks for the heads up about adding a filter. I'd always been under the impression most all propane tanks are clean ? This might explain an older two burner stove I had failed and never knew why and just chocked it up to old age.  Just picked up two new Buddy heaters and don't want to have the same issue.

It’s not the tank, it’s the hose. Most hoses contain plasticisers in the rubber to keep them pliable. The high pressure of the propane in the hose pulls hose plasticisers out of the rubber. I use the hose from mr heater thst doesn’t contain plasticisers and don’t have a problem.


Thanks for the info. Can't wait to use the new word Plasticisers at camp!! :chuckle:

😁😁

 


* Advertisement

* Recent Topics

Reloder 22 In Stock by Rigby416
[Today at 01:25:50 AM]


Muzzleloader scope options by Rigby416
[Today at 01:23:58 AM]


Night force NXS 5.5-22x50 by Craigchilcott
[Today at 01:22:05 AM]


Illinois, No Doubter by wafisherman
[Yesterday at 09:31:04 PM]


2025 deer, let's see em! by northwesthunter84
[Yesterday at 09:15:21 PM]


Let's talk tags by link
[Yesterday at 09:13:12 PM]


What boots? by mboyle0828
[Yesterday at 08:51:29 PM]


Late season archery Roosevelt tips by dreadi
[Yesterday at 08:02:09 PM]


Pepper Jack tillimook by Blacklab
[Yesterday at 07:38:57 PM]


2025 Quality Chewuch Tag by Schmalzfam
[Yesterday at 07:35:41 PM]


New world record mule? by High Climber
[Yesterday at 06:45:04 PM]


Real world feedback needed: Rangefinder Binos by Sakko300wsm
[Yesterday at 06:17:12 PM]


Late Alta Muzzy by ghosthunter
[Yesterday at 04:51:25 PM]


Eastern Washington Late Archery by Pegasus
[Yesterday at 02:49:37 PM]


Calling Bears by dilleytech
[Yesterday at 01:46:49 PM]


Xlr element vs mdt hnt26 by Camo
[Yesterday at 01:04:21 PM]


Bow shop around tacoma-seattle area? by pianoman9701
[Yesterday at 12:55:48 PM]


East Oak smokers? by Sandberm
[Yesterday at 09:52:22 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal