Where to find ejector pin?

[Birdguy]

Good morning, my Remington 11-87 quit ejecting spent shells (kind of ruins the semi auto feature) after a few puzzling minutes i realized the little ejector pin is missing. I have done a small amount of looking and have not been able to find one. Does anyone have one, or know where I can get one. Or recommend a gunsmith in the greater Kitsap area that could help me out? Love the gun but pulling each spent shell out by hand really hinders my follow up opportunities  .  Thank you! 

[CP]

Good morning, my Remington 11-87 quit ejecting spent shells (kind of ruins the semi auto feature) after a few puzzling minutes i realized the little ejector pin is missing. I have done a small amount of looking and have not been able to find one. Does anyone have one, or know where I can get one. Or recommend a gunsmith in the greater Kitsap area that could help me out? Love the gun but pulling each spent shell out by hand really hinders my follow up opportunities  .  Thank you!

Have you tried Brownells?

https://www.brownells.com/shotgun-parts/receiver-action-parts/extractor-parts/index.htm?avs%7cMake%7e%7eModel_1=Remington__11-87

[ASHQUACK]

Check with Harbor Guns in Markham. He usually has any part im looking for. 360-648-2260.

[callturner]

Good morning, my Remington 11-87 quit ejecting spent shells (kind of ruins the semi auto feature) after a few puzzling minutes i realized the little ejector pin is missing. I have done a small amount of looking and have not been able to find one. Does anyone have one, or know where I can get one. Or recommend a gunsmith in the greater Kitsap area that could help me out? Love the gun but pulling each spent shell out by hand really hinders my follow up opportunities  .  Thank you!

Have you tried Brownells?

https://www.brownells.com/shotgun-parts/receiver-action-parts/extractor-parts/index.htm?avs%7cMake%7e%7eModel_1=Remington__11-87

[BigGoonTuna]

If he’s talking about the actual ejector, I think they were just some sort of protruding nub at the back of the barrel extension, it looks like a punch was driven through the outside of the barrel to create it. I did have an older 1100 barrel with one that looked like it had been replaced with a stud or something, so I would imagine it’s repairable, but probably need a smith to do the job.

[wadu1]

If it's just the pin, I made one for a Franchi from a .187 drill bit. Hope you have the spring and ejector.

[wadu1]

Numrich Gun Parts is a good place for parts, #36 Extractor $19.25, #37 Extractor Plunger $9.00 out of stock and #38 extractor spring $7.50.

[follow maggie]

Ed Lapour in Mannette is very good and has reasonable prices.

(360) 479-4966

[Birdguy]

I need the "hook" that ejects the shell. I have no idea where it fell out, my daughter shot it the last few times out and had mentioned it cycles but stopped clearing the spent shell. I will give it a good look over but a gunsmith may well be the best option. I assume there is a pin that hold the extractor in place. Looking at Bownells I can find the extractor but it never mentions 11-87 in the description just the 870 and 1100, while it may be the same I want it RIGHT for the next user. Thank you guys!!

[wadu1]

Try here https://www.gunpartscorp.com/gun-manufacturer/remington/shotguns-rem/1187/parts-list-rem1187

[callturner]

I need the "hook" that ejects the shell. I have no idea where it fell out, my daughter shot it the last few times out and had mentioned it cycles but stopped clearing the spent shell. I will give it a good look over but a gunsmith may well be the best option. I assume there is a pin that hold the extractor in place. Looking at Bownells I can find the extractor but it never mentions 11-87 in the description just the 870 and 1100, while it may be the same I want it RIGHT for the next user. Thank you guys!!

I broke 2 of those "hooks" on my Browning Gold 10 from shooting hot loads. First one I had a gunsmith do and the second I replaced myself. It was a $50. 00 part. at Brownells. Look at the schematic and get the part number .

[Emptyhanded]

If you have the parts it’s pretty simple to replace. Several videos on YouTube showing how. If I’m not mistaken, the extractor is the same for 870, 1100, and 1187.


Sent from my iPhone using Tapatalk