collapse

Advertisement


Author Topic: ADG Brass  (Read 1304 times)

Offline Tenkara

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2015
  • Posts: 863
ADG Brass
« on: January 10, 2021, 10:51:28 AM »
Anyone have any input them? im thinking about ordering some.

Offline Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4962
  • Location: Puyallup
Re: ADG Brass
« Reply #1 on: January 10, 2021, 11:04:35 AM »
I am on the 2nd firing of ADG brass and so far I very pleased.  An improvement over the Norma brass I was using.  It is thicker and heavier brass than Norma, so I suspect less volume, but performance has been good.

Offline Bushcraft

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1166
  • Location: Olympic Peninsula
  • Groups: NRA, SCI, NSSF, RMEF, RMGA, MDF, WSF, DU, HHC, WWC, WDAC
Re: ADG Brass
« Reply #2 on: January 10, 2021, 11:05:16 AM »
It's GTG.  You'll probably need to decrease the powder charge you've been using and regular annealing is VERY beneficial (critical) for maintaining consistent neck tension.
Socialism is the philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery. - Winston Churchill

Work hard. Hunt hard. Lift other hunters up.

*Proud supporter of NRA, NRA-ILA SCI, SCIF, SCI-PAC, NSSF, RMEF, RMGA, MDF, WSF, DU, WWA, HHC, WWC

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3315
  • Location: Spokane Wa.
Re: ADG Brass
« Reply #3 on: January 10, 2021, 12:20:13 PM »
I've also heard it's sometimes a little smaller on case volume and I think ADG even says something about this too.  Also been told by guys that have used it quite a lot it's pretty tough stuff and you can stand on it fairly hard without it giving up primer pockets which is good but can also be bad if you get drunk on chasing velocity too.

Offline NWShooter

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2016
  • Posts: 239
  • Location: Oregon
  • Groups: RockyMountain Elk foundation, Mule Deer Foundation, NRA.
Re: ADG Brass
« Reply #4 on: January 20, 2021, 08:42:33 PM »
It took seven firings with ADG .300 Win Mag brass before I had to kiss the shoulder with a die. Excellent stuff!
A empty vessel makes the most noise.

"Every normal man must be tempted , at times, to spit on his hands, hoist the black flag, and begin slitting throats."

 


* Advertisement

* Recent Topics

New to bear hunting by JimmyHoffa
[Yesterday at 10:39:22 PM]


AUCTION: Custom knife by Alden Cole by teanawayslayer
[Yesterday at 10:04:12 PM]


Seeking packer OnCall for early archery unit 328 Naneum/Colockum by DeerSkin
[Yesterday at 10:01:25 PM]


Spot lock in the salt? by hunthard
[Yesterday at 09:38:57 PM]


Best all around muzzy (updated) by riverrun
[Yesterday at 09:17:25 PM]


Honda BF15A Outboard Problems - FIXED! by 30.06
[Yesterday at 09:04:01 PM]


49 Degrees North Early Bull Moose by 6haase6
[Yesterday at 08:59:22 PM]


GPW Trail Closures by Kascade_Killer
[Yesterday at 08:34:19 PM]


Bonaparte Lake by Birdguy
[Yesterday at 08:26:21 PM]


More Kings! by Stein
[Yesterday at 06:06:46 PM]


2025 Crab! by Stein
[Yesterday at 03:05:47 PM]


Air Dryer Cherries by Stein
[Yesterday at 02:59:12 PM]


Boundary Waters walleye trip by jackelope
[Yesterday at 02:08:52 PM]


Sockeye Numbers by Southpole
[Yesterday at 10:08:15 AM]


Winchester model 97 will not cycle by mudflat mike
[Yesterday at 09:29:17 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal