collapse

Advertisement


Author Topic: ADG Brass  (Read 1293 times)

Offline Tenkara

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2015
  • Posts: 863
ADG Brass
« on: January 10, 2021, 10:51:28 AM »
Anyone have any input them? im thinking about ordering some.

Offline Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4948
  • Location: Puyallup
Re: ADG Brass
« Reply #1 on: January 10, 2021, 11:04:35 AM »
I am on the 2nd firing of ADG brass and so far I very pleased.  An improvement over the Norma brass I was using.  It is thicker and heavier brass than Norma, so I suspect less volume, but performance has been good.

Offline Bushcraft

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1166
  • Location: Olympic Peninsula
  • Groups: NRA, SCI, NSSF, RMEF, RMGA, MDF, WSF, DU, HHC, WWC, WDAC
Re: ADG Brass
« Reply #2 on: January 10, 2021, 11:05:16 AM »
It's GTG.  You'll probably need to decrease the powder charge you've been using and regular annealing is VERY beneficial (critical) for maintaining consistent neck tension.
Socialism is the philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery. - Winston Churchill

Work hard. Hunt hard. Lift other hunters up.

*Proud supporter of NRA, NRA-ILA SCI, SCIF, SCI-PAC, NSSF, RMEF, RMGA, MDF, WSF, DU, WWA, HHC, WWC

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3313
  • Location: Spokane Wa.
Re: ADG Brass
« Reply #3 on: January 10, 2021, 12:20:13 PM »
I've also heard it's sometimes a little smaller on case volume and I think ADG even says something about this too.  Also been told by guys that have used it quite a lot it's pretty tough stuff and you can stand on it fairly hard without it giving up primer pockets which is good but can also be bad if you get drunk on chasing velocity too.

Offline NWShooter

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2016
  • Posts: 239
  • Location: Oregon
  • Groups: RockyMountain Elk foundation, Mule Deer Foundation, NRA.
Re: ADG Brass
« Reply #4 on: January 20, 2021, 08:42:33 PM »
It took seven firings with ADG .300 Win Mag brass before I had to kiss the shoulder with a die. Excellent stuff!
A empty vessel makes the most noise.

"Every normal man must be tempted , at times, to spit on his hands, hoist the black flag, and begin slitting throats."

 


* Advertisement

* Recent Topics

AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by RB
[Today at 09:44:39 PM]


Archery elk gear, 2025. by WapitiTalk1
[Today at 09:41:28 PM]


Unknown Suppressors - Whisper Pickle by pickardjw
[Today at 09:11:06 PM]


Utah cow elk hunt by bearpaw
[Today at 07:18:51 PM]


Oregon spring bear by kodiak06
[Today at 04:40:38 PM]


Tree stand for Western Washingtn by kodiak06
[Today at 04:37:01 PM]


Pocket Carry by BKMFR
[Today at 03:34:12 PM]


A lonely Job... by Loup Loup
[Today at 01:15:11 PM]


Range finders & Angle Compensation by Fidelk
[Today at 11:58:48 AM]


Willapa Hills 1 Bear by hunter399
[Today at 10:55:29 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by bearpaw
[Today at 08:40:03 AM]


KODIAK06 2025 trail cam and personal pics thread by Boss .300 winmag
[Today at 07:53:52 AM]


Yard bucks by Boss .300 winmag
[Yesterday at 11:20:39 PM]


Yard babies by Feathernfurr
[Yesterday at 10:04:54 PM]


Seeking recommendations on a new scope by coachg
[Yesterday at 08:10:21 PM]


Sauk Unit Youth Elk Tips by high_hunter
[Yesterday at 08:06:05 PM]


Jupiter Mountain Rayonier Permit- 621 Bull Tag by HntnFsh
[Yesterday at 07:58:22 PM]


MOVED: Seekins Element 7PRC for sale by Bob33
[Yesterday at 06:57:10 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal