collapse

Advertisement


Author Topic: Help with a resizing die.  (Read 1548 times)

Offline TooTallMike

  • Trade Count: (+13)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 399
  • Location: JBLM
Help with a resizing die.
« on: January 22, 2021, 03:52:18 PM »
Alright everyone I'm working on loading up some ammo for a pre64 win model 70 in 338 win mag.

I have rcbs FL dies, .336 expander mandrel, and a belted magnum collet die to remove the bulge if any from above the belt on the case.

I load up about 15 rds that are middle of the pack when it comes to charge weights and fire them to get the chamber dimensions off the case with a comparator to reference how much I should bump the shoulder back in order to essentially headspace off the shoulder. Now the issue is my rcbs resizer die doesn't even touch the shoulder of the 1x fired cases.

Should I slap in I'ma grinder to shorten it so that it does?

I'd still be able to size the case body with the collet die.

Any suggestions or insight is appreciated. 

Offline Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4944
  • Location: Puyallup
Re: Help with a resizing die.
« Reply #1 on: January 22, 2021, 04:13:18 PM »
Ive got the same gun in the same caliber.  Also use RCBS dies, but mine is a safe queen and Ive never noticed any issues with resizing the brass. 

Offline TooTallMike

  • Trade Count: (+13)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 399
  • Location: JBLM
Re: Help with a resizing die.
« Reply #2 on: January 22, 2021, 05:47:13 PM »
Ive got the same gun in the same caliber.  Also use RCBS dies, but mine is a safe queen and Ive never noticed any issues with resizing the brass. 
Ive got the same gun in the same caliber.  Also use RCBS dies, but mine is a safe queen and Ive never noticed any issues with resizing the brass.

It's not necessarily an issue with getting them to saami. It's an issue with bump sizing.

Are you sizing in reference to your fired case or just back to Saami?

Offline 300rum

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 2357
Re: Help with a resizing die.
« Reply #3 on: January 22, 2021, 06:09:56 PM »
Are you screwing the die down far enough?  It should "cam over" on the down stroke.  You should feel it. 

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5602
Re: Help with a resizing die.
« Reply #4 on: January 22, 2021, 07:04:32 PM »
Like said screw the die down, But If the brass chambers freely you don't need to worry about the shoulders.  Any resistance ?


Offline TooTallMike

  • Trade Count: (+13)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 399
  • Location: JBLM
Re: Help with a resizing die.
« Reply #5 on: January 22, 2021, 07:05:06 PM »
Are you screwing the die down far enough?  It should "cam over" on the down stroke.  You should feel it.

It does screw all the way down and cams over but it doesn't change the shoulder dimensions of fired cases

Offline TooTallMike

  • Trade Count: (+13)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 399
  • Location: JBLM
Re: Help with a resizing die.
« Reply #6 on: January 22, 2021, 07:06:56 PM »
Like said screw the die down, But If the brass chambers freely you don't need to worry about the shoulders.  Any resistance ?

I'm trying to bump size it off the shoulder to preserve brass life

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5602
Re: Help with a resizing die.
« Reply #7 on: January 22, 2021, 07:12:57 PM »
Like said screw the die down, But If the brass chambers freely you don't need to worry about the shoulders.  Any resistance ?

I'm trying to bump size it off the shoulder to preserve brass life

The less you bump the longer it lasts.  With a light load and virgin brass it might not grow enough to even need or allow it to be bumped.   But usually dies allow brass to be bumped way more than you want.  Maybe you have a really short chamber ? 

Offline Reidus

  • Trade Count: (+15)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 878
  • Location: Tri-Cities
Re: Help with a resizing die.
« Reply #8 on: January 22, 2021, 08:37:22 PM »
If it goes back in the gun after sizing, I'd leave as is. When the brass gets tight in the gun and it still don't bump the shoulder, I'd grind some off the bottom of the die.

 


* Advertisement

* Recent Topics

Sockeye Numbers by CP
[Today at 10:09:30 AM]


Need information on having a gunsmith thread a barrel for thin walled chokes. by Badhabit
[Today at 10:04:04 AM]


1st Quality Deer tag in Washington and its a muzzleloader tag by addicted1
[Today at 09:36:06 AM]


Area 11 2025 - Well? by bigdub257
[Today at 09:28:10 AM]


Ten Years, and still plugging along by Karl Blanchard
[Today at 09:21:43 AM]


Archery Pins by kodiak06
[Today at 05:47:51 AM]


Blue Mtn Foothills West Rifle Tag by teanawayslayer
[Today at 04:32:16 AM]


2025 Quality Chewuch Tag by huntnphool
[Yesterday at 10:27:22 PM]


erronulvin trail cam photos by actionshooter
[Yesterday at 09:04:17 PM]


Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by ghosthunter
[Yesterday at 07:44:01 PM]


2024 Quality Buck coming home by Kingofthemountain83
[Yesterday at 07:17:01 PM]


2025 Washington Rocky Mountain Bighorn Sheep Raffle by GurrCentral
[Yesterday at 06:50:57 PM]


KODIAK06 2025 trail cam and personal pics thread by Kingofthemountain83
[Yesterday at 06:39:14 PM]


Colockum Archery Bull Tag by SkookumHntr
[Yesterday at 04:15:27 PM]


Public Land Sale Senate Budget Reconciliation by Tbar
[Yesterday at 03:47:14 PM]


Asking for Gift of Knowledge by Silversands
[Yesterday at 02:48:58 PM]


What bull would you pick? by Gentrys
[Yesterday at 11:34:17 AM]


NEED ADVICE: LATE after JUNE 15th IDAHO BEAR by hunter399
[Yesterday at 11:29:38 AM]


Son drawn - Silver Dollar Youth Any Elk - Help? by Gentrys
[Yesterday at 11:21:15 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal