collapse

Advertisement


Author Topic: Recurve Tuning Help  (Read 3089 times)

Offline fisheral87

  • Trade Count: (+5)
  • Longhunter
  • *****
  • Join Date: Sep 2008
  • Posts: 727
  • Location: Mukilteo, WA
    • https://www.facebook.com/home.php
  • Groups: WSCPA, BHA
Recurve Tuning Help
« on: February 14, 2021, 02:44:57 PM »
My diagnosis is that My arrow spine is too stiff, but looking for opinions?

Howatt Hunter 42#

Bear weather rest

Beaman ICS Hunters 400gr, 5” 3 fletch
200gr point

Tearing low and right consistently with 3 different arrows, see pics

Thank you,

Al



"Luck is a dividend of sweat, the more you sweat the luckier you get." - Ray Kroc

Offline Tracker0721

  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Dec 2014
  • Posts: 760
  • Location: Malo
Re: Recurve Tuning Help
« Reply #1 on: February 14, 2021, 03:35:00 PM »
What’s your draw length and how long are your arrows? That’s a stiff reading, add more weight up front or longer arrows or drop to 500s. My ex shot 500s through her 43#er with 175 grains in the front.
May my presence go unnoticed, may my shot be true, may the blood trail be short.

Amen

Offline fisheral87

  • Trade Count: (+5)
  • Longhunter
  • *****
  • Join Date: Sep 2008
  • Posts: 727
  • Location: Mukilteo, WA
    • https://www.facebook.com/home.php
  • Groups: WSCPA, BHA
Re: Recurve Tuning Help
« Reply #2 on: February 14, 2021, 07:01:12 PM »
29.5 draw, 29.5 arrows
"Luck is a dividend of sweat, the more you sweat the luckier you get." - Ray Kroc

Offline Webfoot

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Oct 2007
  • Posts: 314
  • Location: Forks Wa.
Re: Recurve Tuning Help
« Reply #3 on: February 15, 2021, 04:31:18 PM »
I see your bow square but am not sure what your nock is set at. I would get rid of the raised arrow rest and put a rug on the shelf and a thin side plate. I think trad bows shoot better with the arrow down on the shelf. Lower your nocking point about 1/16" inch at a time and see if it helps. If it gets worse raise it up in the same increments and see what happens. If none of this helps then look at different arrows.
I usually don't paper tune. Put a vertical line on your target and shoot at it. If your right handed and the arrows shoot right of the line they are to weak. If they shoot left of the line they are to stiff.
Good luck
John

Offline fisheral87

  • Trade Count: (+5)
  • Longhunter
  • *****
  • Join Date: Sep 2008
  • Posts: 727
  • Location: Mukilteo, WA
    • https://www.facebook.com/home.php
  • Groups: WSCPA, BHA
Re: Recurve Tuning Help
« Reply #4 on: February 15, 2021, 05:27:29 PM »
Thanks Webfoot

I had a hair rest and the vanes destroyed it and scratched the shelf. I’ll consider changing my testing methodology if I can’t sort out my issues with paper tuning.

Al
"Luck is a dividend of sweat, the more you sweat the luckier you get." - Ray Kroc

Offline Webfoot

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Oct 2007
  • Posts: 314
  • Location: Forks Wa.
Re: Recurve Tuning Help
« Reply #5 on: February 15, 2021, 08:15:24 PM »
Your fletching should not be destroying your rest on the shelf. If the fletch is hitting the shelf that hard something is bad wrong. Typically to high or low of a nock point, or the arrows are way out of spine.
I have bows that have had several thousand arrows shot through them and there is not a mark on the rest. I like to use the fuzzy side of Velcro for rest material and a thin piece of leather for a side plate.
Good luck.
John

Offline Tracker0721

  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Dec 2014
  • Posts: 760
  • Location: Malo
Re: Recurve Tuning Help
« Reply #6 on: February 16, 2021, 07:39:30 AM »
You said vanes, you should be shooting with feathers instead. Much more forgiving when passing over the rest. And I know lots of people who shoot off the rests, you’re canting the bow to the right hence the low right tear you’re getting, though generally your nock should be higher as well, mine is nearly 3/8”. When paper tuning a trad bow shoot the bow vertically or be mindful that your + is now canted like your bow. Try a 500 spine or keep your arrow full length is my suggestion. Use those short ones for small game
May my presence go unnoticed, may my shot be true, may the blood trail be short.

Amen

Offline Tracker0721

  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Dec 2014
  • Posts: 760
  • Location: Malo
Re: Recurve Tuning Help
« Reply #7 on: February 16, 2021, 07:43:07 AM »
I’ve got tons of arrows and fletching and saw etc, if you were closer I’d offer you to come try with my arrows until you get it dialed in. Chasing a perfect tune gets expensive haha
May my presence go unnoticed, may my shot be true, may the blood trail be short.

Amen

 


* Advertisement

* Recent Topics

Tree stand for Western Washingtn by Shannon
[Today at 08:56:36 AM]


Range finders & Angle Compensation by kentrek
[Today at 08:42:17 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by bearpaw
[Today at 08:40:03 AM]


KODIAK06 2025 trail cam and personal pics thread by Boss .300 winmag
[Today at 07:53:52 AM]


Pocket Carry by JimmyHoffa
[Today at 07:49:09 AM]


Yard bucks by Boss .300 winmag
[Yesterday at 11:20:39 PM]


Yard babies by Feathernfurr
[Yesterday at 10:04:54 PM]


Seeking recommendations on a new scope by coachg
[Yesterday at 08:10:21 PM]


Sauk Unit Youth Elk Tips by high_hunter
[Yesterday at 08:06:05 PM]


Jupiter Mountain Rayonier Permit- 621 Bull Tag by HntnFsh
[Yesterday at 07:58:22 PM]


MOVED: Seekins Element 7PRC for sale by Bob33
[Yesterday at 06:57:10 PM]


3 pintails by metlhead
[Yesterday at 04:44:03 PM]


1993 Merc issues getting up on plane by Happy Gilmore
[Yesterday at 04:37:55 PM]


A lonely Job... by AL WORRELLS KID
[Yesterday at 03:21:14 PM]


Unit 364 Archery Tag by buglebuster
[Yesterday at 12:16:59 PM]


In the background by zwickeyman
[Yesterday at 12:10:13 PM]


A. Cole Lockback in AEB-L and Micarta by A. Cole
[Yesterday at 09:15:34 AM]


Willapa Hills 1 Bear by hunter399
[Yesterday at 08:24:48 AM]


Sockeye Numbers by Southpole
[July 03, 2025, 09:02:04 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal