collapse

Advertisement


« previous next »
Pages: [1] 2 3  All   Go Down

Author Topic: DIY turret press  (Read 8423 times)

Offline Bareback

  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Aug 2020
  • Posts: 563
  • Location: Whidbey Island
DIY turret press
« on: February 26, 2021, 09:59:41 AM »
As we all know everything gun associated stuff is out of stock, backordered or just not available. I’ve had a turret press on backorder for over four months. I’m beginning to seriously doubt it will be here in the next few months. So..... I said screw it and will just make my own. I took measurements from my Hornady single stage, went online to find a style I would prefer, sat down with some measuring instruments, and started designing on CAD. I sifted through all the materials I’ve been hoarding for the last 25+ years and found some 7075 aluminum billet, some 4140 pre-hard, and my daughter unknowingly volunteered some spare bearings from her old roller blades.

I’m at the infancy stage of the project now. So, if any of the reloading gurus have any features or suggestions that may be beneficial to the design lets hear them. I’ll post pictures throughout the machining process.

Logged

Offline TommyH

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 2107
  • Location: Eastside
Re: DIY turret press
« Reply #1 on: February 26, 2021, 10:31:06 AM »
Following along.
Logged

Offline mtnwkr

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2015
  • Posts: 69
  • Location: Port Orchard, Wa
Re: DIY turret press
« Reply #2 on: February 26, 2021, 10:56:15 AM »
Logged

Offline Bareback

  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Aug 2020
  • Posts: 563
  • Location: Whidbey Island
Re: DIY turret press
« Reply #3 on: February 26, 2021, 03:04:23 PM »
The Lee looks to be out of stock on that link.

Manage to get the arms done today. Hopefully next week I can get some more machine time.

Logged

Offline Bareback

  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Aug 2020
  • Posts: 563
  • Location: Whidbey Island
Re: DIY turret press
« Reply #4 on: March 05, 2021, 04:02:03 PM »
Found some machine time at the end of the day. Managed to get half the turret done. Dialed the material in to .0002” wanting to keep perpendicularity and parallelism within .0005" for the whole project.

Off to chase chrome next week. Hopefully I can nock another chunk out of the project third week of March.
Logged

Offline storyteller

  • Forum Sponsor
  • Trade Count: (+14)
  • Scout
  • *****
  • Join Date: Jun 2014
  • Posts: 337
  • Location: Marysville
  • Groups: NRA, DU
Re: DIY turret press
« Reply #5 on: March 05, 2021, 05:27:32 PM »
Nice work.   
Logged

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5620
Re: DIY turret press
« Reply #6 on: March 05, 2021, 06:22:36 PM »
purdy !!!! :tup:
Logged

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31547
  • Location: Goldendale,WA
Re: DIY turret press
« Reply #7 on: March 05, 2021, 06:57:56 PM »
Way cool  :tup:
Logged
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline deerhunter_98520

  • Past Sponsor
  • Trade Count: (+4)
  • Old Salt
  • *****
  • Join Date: Nov 2009
  • Posts: 8929
  • Location: aberdeen, wa
  • Chief Executive Head Anarchist of YKWTSASFFRO
Re: DIY turret press
« Reply #8 on: March 05, 2021, 09:17:46 PM »
Very awesome  :tup:
Logged
Official hunt-wa bigfoot field researcher!

Offline NRA4LIFE

  • Site Sponsor
  • Past Sponsor
  • Trade Count: (+10)
  • Old Salt
  • *****
  • Join Date: Nov 2007
  • Posts: 6057
  • Location: Maple Valley
  • Groups: NRA
Re: DIY turret press
« Reply #9 on: March 05, 2021, 09:30:34 PM »
I am following big time. These projects are fascinating to me. Is this your own machine you're using?
Logged
Look man, some times you just gotta roll the dice

Offline Bushcraft

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1170
  • Location: Olympic Peninsula
  • Groups: NRA, SCI, NSSF, RMEF, RMGA, MDF, WSF, DU, HHC, WWC, WDAC
Re: DIY turret press
« Reply #10 on: March 10, 2021, 10:43:54 AM »
Someone is building their own Area 419 Zero. ;)

Nice!
Logged
Socialism is the philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery. - Winston Churchill

Work hard. Hunt hard. Lift other hunters up.

*Proud supporter of NRA, NRA-ILA SCI, SCIF, SCI-PAC, NSSF, RMEF, RMGA, MDF, WSF, DU, WWA, HHC, WWC

Offline highside74

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Old Salt
  • ******
  • Join Date: Oct 2009
  • Posts: 5484
  • Location: Eatonville wa
Re: DIY turret press
« Reply #11 on: March 10, 2021, 10:58:17 AM »
I'm am always so impressed with the talents of people on this forum. Very cool man.
Logged

Offline Bareback

  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Aug 2020
  • Posts: 563
  • Location: Whidbey Island
Re: DIY turret press
« Reply #12 on: March 12, 2021, 04:14:28 PM »
NRA4LIFE ........  It just happens to be my machine.

Bushcraft ...... I think I may call this one Area 51 😉

Finished the turret today. Next week on to the easy stuff, hopefully.
Logged

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6542
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: DIY turret press
« Reply #13 on: March 12, 2021, 04:59:11 PM »
Tagging along.  Looks great
Logged
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31547
  • Location: Goldendale,WA
Re: DIY turret press
« Reply #14 on: March 12, 2021, 05:32:43 PM »
Looks like awesome work!!!
Logged
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner
Pages: [1] 2 3  All   Go Up
« previous next »
 


* Advertisement

Quick Links

* Recent Topics

Late season in gods Country My big buck by high_hunter
[Today at 12:22:54 AM]
Long distance love affair by high_hunter
[Today at 12:21:14 AM]
Selkirk bull moose. by X-Force
[Yesterday at 11:28:24 PM]
Real world feedback needed: Rangefinder Binos by JDHasty
[Yesterday at 09:34:31 PM]
The Okanogan Deer Book by JDHasty
[Yesterday at 09:20:53 PM]
Old recessed buck by Schmalzfam
[Yesterday at 08:53:46 PM]
Idaho deer question by Tbob
[Yesterday at 08:20:43 PM]
Best service for estimating draw odds by actionshooter
[Yesterday at 07:50:29 PM]
Cowichie muzzy bull this year by Kingofthemountain83
[Yesterday at 07:43:52 PM]
2025 elk success thread!! by 10thmountainarcher
[Yesterday at 07:21:33 PM]
Diarrhea ? by Knocker of rocks
[Yesterday at 06:39:31 PM]
2025 deer, let's see em! by Kingofthemountain83
[Yesterday at 06:19:55 PM]
Big Bull Elk Hit On Hwy 970? by Roslyn Rambler
[Yesterday at 06:19:23 PM]
My wife found her first shed by NOCK NOCK
[Yesterday at 05:18:09 PM]
Perfect evening hunt by bearhunter99
[Yesterday at 05:16:50 PM]
WA Bucket List….Mule Deer Permit by huntnphool
[Yesterday at 04:44:02 PM]
White River late archery by trophyhunt
[Yesterday at 04:23:56 PM]
5 Points......(mule deer or blacktails) by boneaddict
[Yesterday at 02:46:16 PM]
Dash cams by CP
[Yesterday at 12:44:52 PM]
Nevada bull hunt 2025 by bearhunter99
[Yesterday at 11:04:37 AM]
SimplePortal 2.3.7 © 2008-2025, SimplePortal