collapse

Advertisement


Author Topic: skunk boards  (Read 3051 times)

Offline greenhead_killer

  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Nov 2010
  • Posts: 2164
  • Location: the burg
  • Groups: wsf life member, wsta, mdf, sci, sscf
skunk boards
« on: March 22, 2021, 02:32:31 PM »
quick question, what is everyone using for skunks? cant seem to find anything specific to them for boards. is everyone just using coon boards? thanks for the replies

Offline Birdgetter

  • WA State Trappers Association
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2017
  • Posts: 578
Re: skunk boards
« Reply #1 on: March 22, 2021, 03:56:21 PM »
I bought some skunk boards from Grawes lures this year. They were supposed to be 48 inches long but are only like 36 inches. They are too short for most skunks. A medium coon board works well for most skunks.

Online Loup Loup

  • Non-Hunting Topics
  • Trade Count: (+4)
  • Scout
  • ****
  • Join Date: Jan 2020
  • Posts: 460
  • Location: NCW
  • Groups: WSTA, ITA, Intermountain Fur Harvesters, F4WM
Re: skunk boards
« Reply #2 on: March 22, 2021, 04:06:07 PM »
A coon board would work, but wider than it should be.
My skunk boards are made useing FHA pattern. Bearpaw has posted NAFA patterns at top of this forum deal. I don't see the skunk pattern. But use the small fox pattern as will be the same. Make them long, as I use my skunk boards for med cats. Remember to use a belly wedge. On cats, otter, I put belly wedge down through mouth. Skunk, coon belly wedge up from bottom.
Down load FHA fur handleing manual as much good info in it.

Offline greenhead_killer

  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Nov 2010
  • Posts: 2164
  • Location: the burg
  • Groups: wsf life member, wsta, mdf, sci, sscf
Re: skunk boards
« Reply #3 on: March 22, 2021, 06:35:40 PM »
Thanks for the replies guys. I normally stick to water trapping as time requires me to but had a chance to throw a set this weekend at a friends house. Got my first skunk.

That being said, how you get the smell out? You guys washing the skunks before fleshing and boarding? It’s not the worst smell, but it’s a bit ripe. There are so many skunks in the valley, it would be nice to get this dialed in for future endeavors
« Last Edit: March 22, 2021, 07:27:02 PM by greenhead_killer »

Offline Humptulips

  • Global Moderator
  • Trade Count: (+2)
  • Old Salt
  • *****
  • Join Date: May 2010
  • Posts: 9094
  • Location: Humptulips
    • Washington State Trappers Association
  • Groups: WSTA, NTA, FTA, OTA, WWC, WFW, NRA
Re: skunk boards
« Reply #4 on: March 23, 2021, 10:21:15 AM »
I have never trapped a striped skunk but I have put up a few. I used my otter boards which I also use for cats and coyote. Seemed about right, possibly too wide for a small skunk. Coon boards are too wide in my opinion.
Spotted skunk go on mink boards.
Bruce Vandervort

Offline greenhead_killer

  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Nov 2010
  • Posts: 2164
  • Location: the burg
  • Groups: wsf life member, wsta, mdf, sci, sscf
Re: skunk boards
« Reply #5 on: March 23, 2021, 06:42:41 PM »
did a bit more digging(with guidance from some on here) and looks like fox boards are the preferred sized board for doing striped skunks. thanks for all the replies guys!
« Last Edit: March 24, 2021, 10:19:48 AM by greenhead_killer »

Offline blnelson

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2016
  • Posts: 27
  • Location: N.E. Washington
  • Groups: WSTA
Re: skunk boards
« Reply #6 on: March 25, 2021, 09:56:02 PM »
The Grawes skunk boards are the best. As far as the smell if you make a solution of 1 quart peroxide 1/4 cup soda teaspoon of dawn dish soap soak and wash around a bit and rinse with cold water life will be better. Dry the fur and it's ready for skinning. Save the skull and the essence

Online Loup Loup

  • Non-Hunting Topics
  • Trade Count: (+4)
  • Scout
  • ****
  • Join Date: Jan 2020
  • Posts: 460
  • Location: NCW
  • Groups: WSTA, ITA, Intermountain Fur Harvesters, F4WM
Re: skunk boards
« Reply #7 on: March 26, 2021, 05:41:21 AM »
Well the Fat Lady can sing now. We just got the word from the guy that sold the top 25 skunks at the Intermountain sale last weekend. Perfectly put up. Paid off as blnelson got the highest price Ive seen at auction.

Offline Humptulips

  • Global Moderator
  • Trade Count: (+2)
  • Old Salt
  • *****
  • Join Date: May 2010
  • Posts: 9094
  • Location: Humptulips
    • Washington State Trappers Association
  • Groups: WSTA, NTA, FTA, OTA, WWC, WFW, NRA
Re: skunk boards
« Reply #8 on: March 26, 2021, 03:07:26 PM »
Don't hold out on us. How much?
Bruce Vandervort

Online Loup Loup

  • Non-Hunting Topics
  • Trade Count: (+4)
  • Scout
  • ****
  • Join Date: Jan 2020
  • Posts: 460
  • Location: NCW
  • Groups: WSTA, ITA, Intermountain Fur Harvesters, F4WM
Re: skunk boards
« Reply #9 on: March 26, 2021, 03:27:59 PM »
Maybe somebody smarter than me could post the sale results. Very nice printout.

Offline greenhead_killer

  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Nov 2010
  • Posts: 2164
  • Location: the burg
  • Groups: wsf life member, wsta, mdf, sci, sscf
Re: skunk boards
« Reply #10 on: March 26, 2021, 09:49:20 PM »
The Grawes skunk boards are the best. As far as the smell if you make a solution of 1 quart peroxide 1/4 cup soda teaspoon of dawn dish soap soak and wash around a bit and rinse with cold water life will be better. Dry the fur and it's ready for skinning. Save the skull and the essence

I’ll have to look them up again and grab a few. Thanks!

And let’s see the list!

 


* Advertisement

* Recent Topics

Oregon Seed #'s by Doublelunger
[Today at 07:35:15 PM]


DIY Ucluelet trip by wadu1
[Today at 07:28:02 PM]


Burrowing Animal by Ridgeratt
[Today at 06:11:55 PM]


WDFW falsely advertising preference points by hunter399
[Today at 04:38:43 PM]


Oregon spring bear by Doublelunger
[Today at 02:05:20 PM]


Black Eagle arrows deals by kodiak06
[Today at 02:02:59 PM]


2025 Multiseason Deer General? by Goshawk
[Today at 12:23:10 PM]


Last year putting in… by Dirtnap
[Today at 11:48:14 AM]


Colorado Results by vandeman17
[Today at 10:20:27 AM]


What's flatbed pickup life like? by Special T
[Today at 10:19:28 AM]


Tag issues with "Get Outdoors" package by Encore 280
[Today at 08:54:30 AM]


.300 Win Mag Rounds by W.Goomsba
[Today at 08:29:32 AM]


Shout out to Talley Manufacturing by EnglishSetter
[Yesterday at 09:56:57 PM]


Knight ridge runner by Irish_hunter93
[Yesterday at 09:43:04 PM]


Halibut fishing by hiway_99
[Yesterday at 08:10:49 PM]


Desert Sheds by aer212
[Yesterday at 07:21:58 PM]


Finally found him! by zwickeyman
[Yesterday at 05:45:27 PM]


Vantage Bridge by MADMAX
[Yesterday at 04:58:46 PM]


Nevada Results by High Climber
[Yesterday at 04:51:37 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal