collapse

Advertisement


Author Topic: Help repairing MinnKota Endura trolling motor  (Read 1948 times)

Offline Pete112288

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 1237
  • Location: Vancouver, WA
Help repairing MinnKota Endura trolling motor
« on: April 22, 2021, 12:40:35 AM »
So I have had some problems with my trolling motor for the second half of last summer, then the only day I got out duck hunting in the fall it wouldnt work. It would turn but super slow. On the 5th speed the prop would make 1 revolution in like 3 seconds.
It is a 50lbs thrust endura transom mount.
When the problems started I could jiggle the motor and it would sometimes kick up and go.
I did have a couple bad trips as far as the motor taking a beating on hitting objects and broke a shear pin for the first time ever in a trolling motor.
I opened up the lower unit and it had brown rusty water in it. Looks like it had water in it for a bit. The paper/cardboard ring thing by the brushes was soaked and shredded.
I found an entire assembled lower unit for $160 ish. But if I buy all the internal parts and seals to overhaul it I can keep it at about $100.
I am just not sure. The process seems pretty straight forward. But I dont know if I am going overboard, if really its only a few specific parts I would need. And the process for some of the seals I dont want to screw up.
Does anyone have any tips or insight into this? Worked on them before?
Is there a way I can test to see if some parts need replaced or not?

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7073
  • Location: Mukilteo
Re: Help repairing MinnKota Endura trolling motor
« Reply #1 on: April 22, 2021, 10:12:57 AM »
It's probably not worth the effort.  A new Minn Kota Endura C2 50lb is about $220.  You could try cleaning everything up and installing a new brush and seal kit.  Most likely that would fix it; but you never know for sure.


Offline TheStovePipeKid

  • They call me MISTER KID!
  • Business Sponsor
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Feb 2013
  • Posts: 755
  • Location: Lakebay, Wa
  • I. Kill. Turkey.
    • TheStovePipeKid
Re: Help repairing MinnKota Endura trolling motor
« Reply #2 on: April 22, 2021, 02:37:30 PM »
It's probably not worth the effort.  A new Minn Kota Endura C2 50lb is about $220.  You could try cleaning everything up and installing a new brush and seal kit.  Most likely that would fix it; but you never know for sure.

I've refurbished a couple of Minn Kota trolling motors before. If you cleaned up the lower end and it's still giving you fits I'd recommend the same as CP, just get a new one. It probably will never run quite right again. You can sell the old one for parts to make up some of the cost.
I laugh in the face of Danger. Ha ha ha Danger Face!

Offline Bill W

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1942
  • Location: Moses Lake
  • Groups: NRA, CBA
Re: Help repairing MinnKota Endura trolling motor
« Reply #3 on: April 22, 2021, 04:25:18 PM »
you have a minnkota repair station in Vancouver.  You might check them out. ASC stands for authorized service center.


PACIFIC BOATLAND - (ASC)
11704 NE HWY 99
VANCOUVER, OR WA 98686
360-573-0621
M-F: 8:30-5:30; SA: 9-4
« Last Edit: April 22, 2021, 06:17:27 PM by wadu1 »

Offline Pete112288

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 1237
  • Location: Vancouver, WA
Re: Help repairing MinnKota Endura trolling motor
« Reply #4 on: April 22, 2021, 10:42:01 PM »
Thanks for the replies. I was wondering about just replacing it.
Also thought about buying one of the smaller 30 lb thrust ones. Thats what I had before and it worked. Did the job and a little easier to manage size wise on the boat. The 50 was just a lot nicer in wind, going low and slow, and getting through the lily pads.
But if I got a 30, I could spend $100 and then tinker with my current 50 in my spare time.

 


* Advertisement

* Recent Topics

Mt. St. Helens Goat by CNELK
[Today at 10:21:34 PM]


Selling Pistols and rifles by Rat44
[Today at 09:45:29 PM]


Apps per Tag for Muzzy Elk by High Climber
[Today at 09:21:16 PM]


Muzzleloader Scope by Dan-o
[Today at 08:24:45 PM]


Ross Lake boat launch? by Oldguy
[Today at 08:14:32 PM]


Gots me a new/old rockchuck rifle coming by JDHasty
[Today at 07:54:20 PM]


Muzzleloader scope options by trophyhunt
[Today at 06:13:21 PM]


AUCTION: Custom knife by Alden Cole by Dan-o
[Today at 05:59:26 PM]


Lots of coho by baldopepper
[Today at 05:57:42 PM]


newbie bear field dressing and hide by KNOPHISH
[Today at 05:21:23 PM]


GMU 247 Entiat bear hunting by jstone
[Today at 04:58:38 PM]


More Kings! by Crunchy
[Today at 04:38:57 PM]


Spot lock in the salt? by GWP
[Today at 08:04:10 AM]


Anybody breeding meat rabbit? by HighlandLofts
[Today at 02:36:05 AM]


Wall Tents Tips and Tricks by ghosthunter
[Yesterday at 10:33:57 PM]


2025 Washington Rocky Mountain Bighorn Sheep Raffle by trophyhunt
[Yesterday at 08:15:41 PM]


Calling in August in Western Washington by bearmanric
[Yesterday at 06:43:42 PM]


Nice bull? by Kingofthemountain83
[Yesterday at 06:01:05 PM]


Tease 'l' by kellama2001
[Yesterday at 12:09:30 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal