collapse

Advertisement


Author Topic: 30-06 and RL22 or H4381  (Read 2035 times)

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 493
  • Location: Whatcom County
30-06 and RL22 or H4381
« on: April 26, 2021, 07:27:33 AM »
Running low on 4350, so I have to figure out something with RL22 or H4381.

Anyone have luck with 30-06 in 180g with RL 22?  Specifically I'm wondering if the need the pack the case or get to a compressed load.

I'm getting the velocity I want at a relative low charge (compared to the books), but still circling the drain as far as identifying something that groups.  Seating depth changes don't seem to tighten up things.  Ladder tests with the chrono are as expected, so nothing unusual there.

Nosler has 58.0 as the starting weight, going up to 62.0  I'm seeing 2750 fps at 58.0 grains for 180g bullet.  Not a lot of room left in that case.  I've always achieved decent velocity with this gun, and other powders and bullets without having to go beyond max book, or even approach max book. 

I supposed I could increase the charge because I'm not seeing any pressure signs, and see what happens.

I'm shooting 178 ELDX or 180g interlock.

« Last Edit: April 26, 2021, 07:44:07 AM by wooltie »

Offline deerhunter_98520

  • Past Sponsor
  • Trade Count: (+4)
  • Old Salt
  • *****
  • Join Date: Nov 2009
  • Posts: 8929
  • Location: aberdeen, wa
  • Chief Executive Head Anarchist of YKWTSASFFRO
Re: 30-06 and RL22 or H4381
« Reply #1 on: April 26, 2021, 10:44:04 AM »
I'm running 62gr reloder 22 but with 168gr. It's compressed and is a tack driver just over 2900fps. I havent tried 180s with the 168s performing so well. What kind of grouping are you getting now?
Official hunt-wa bigfoot field researcher!

Offline jeffitz

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 341
  • Location: SW WA
Re: 30-06 and RL22 or H4381
« Reply #2 on: April 26, 2021, 11:06:42 AM »
I'm running 62gr reloder 22 but with 168gr. It's compressed and is a tack driver just over 2900fps. I havent tried 180s with the 168s performing so well. What kind of grouping are you getting now?


Same here- compressed RL22 (cant remember exact grain amount at the moment) with the 168 Nosler Ballistic Tip - shoots good out of my old Ruger.
If you're gonna be dumb,you gotta be tough.

Offline HooknoseHunter

  • Trade Count: (+3)
  • Hunter
  • ***
  • Join Date: Jul 2015
  • Posts: 129
  • Location: Stevens County
Re: 30-06 and RL22 or H4381
« Reply #3 on: April 26, 2021, 05:37:30 PM »
Running low on 4350, so I have to figure out something with RL22 or H4381.

Anyone have luck with 30-06 in 180g with RL 22?  Specifically I'm wondering if the need the pack the case or get to a compressed load.

I'm getting the velocity I want at a relative low charge (compared to the books), but still circling the drain as far as identifying something that groups.  Seating depth changes don't seem to tighten up things.  Ladder tests with the chrono are as expected, so nothing unusual there.

Nosler has 58.0 as the starting weight, going up to 62.0  I'm seeing 2750 fps at 58.0 grains for 180g bullet.  Not a lot of room left in that case.  I've always achieved decent velocity with this gun, and other powders and bullets without having to go beyond max book, or even approach max book. 

I supposed I could increase the charge because I'm not seeing any pressure signs, and see what happens.

I'm shooting 178 ELDX or 180g interlock.

I use 59.0 grains of RL22 behind a 180gr Speer Hot Cor in my 30-06 and it’s extremely accurate.

Offline MeatMissile

  • Trade Count: (+9)
  • Scout
  • ****
  • Join Date: Jun 2018
  • Posts: 262
Re: 30-06 and RL22 or H4381
« Reply #4 on: April 27, 2021, 11:14:11 PM »
180 and 200gr bullets, a 24-26 inch barrel, and H4831 has worked well for me in the 30-06. 

Offline Wanttohuntmore

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1976
Re: 30-06 and RL22 or H4381
« Reply #5 on: April 28, 2021, 06:51:01 AM »
62 of R22 behind a 165 accubond.  Accurate and Fast!  Been wanting to try 178 ELDX but supply is low.

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 493
  • Location: Whatcom County
Re: 30-06 and RL22 or H4381
« Reply #6 on: April 28, 2021, 09:46:23 AM »
Thanks for the input.  Maybe I'll increase the load and see what that does, although I'm getting good velocity at lower weights. 

Could always try some 165s too.  Getting 2750 fps on 180g at 58.0g RL22...

 


* Advertisement

* Recent Topics

2027 Pink Run Destroyed by Happy Gilmore
[Yesterday at 10:12:04 PM]


Hey, Seahawks fans! by ganghis
[Yesterday at 10:01:44 PM]


Question about Hancock Timber Co Eastside by hunter399
[Yesterday at 09:37:59 PM]


WA Bucket List….Mule Deer Permit by hunter399
[Yesterday at 09:32:08 PM]


F150 Tire/Wheel Guys by elksnout
[Yesterday at 05:26:33 PM]


The Rack by NOCK NOCK
[Yesterday at 05:14:27 PM]


My Entiat Late tag thread by jrebel
[Yesterday at 05:06:49 PM]


2025 deer, let's see em! by Kingofthemountain83
[Yesterday at 04:24:59 PM]


Idaho on the verge of outlawing by Twispriver
[Yesterday at 02:31:20 PM]


Cell Cams for Westside Elk by Kingofthemountain83
[Yesterday at 02:26:48 PM]


This Jeff Davis guy. by Kingofthemountain83
[Yesterday at 02:14:52 PM]


Crazy looking Deer by Gobble Doc
[Yesterday at 01:23:27 PM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by wadu1
[Yesterday at 01:22:08 PM]


Darwood Outfitters by Skyvalhunter
[Yesterday at 01:04:49 PM]


Wildlife Obsession Duvall WA Taxidermy Closing its doors by 253CritterGetter
[Yesterday at 12:24:57 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal