collapse

Advertisement


Author Topic: Sighting in rifle  (Read 4826 times)

Offline blackpowderhunter

  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Apr 2014
  • Posts: 1183
  • Location: Renton
Re: Sighting in rifle
« Reply #15 on: September 22, 2021, 09:09:40 AM »
i'd borrow a chronograph.
not saying your vel. is 2200 fps as calcs would suggest, but its hard to guess around velocity.
some barrels like something more than another, could be a funny batch of powder, whole bunch of stuff.
the weird part is that whatever velocity you're getting, they're grouping nicely  :chuckle: :dunno: :dunno:

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4515
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Sighting in rifle
« Reply #16 on: September 22, 2021, 10:01:29 AM »
If you arent able to collect actual velocity data, you probably arent going to be able to resolve your issue.  In that case you may be well advised to buy a couple boxes of factory ammo for sight in and hunt until you have a chance to resolve the issues.  If the factory ammo does the same thing then you have other problems to resolve.   :twocents:

Offline Mccabe

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jun 2021
  • Posts: 18
  • Location: Goldendale
    • Don’t have one
  • Groups: Ducks unlimited
Re: Sighting in rifle
« Reply #17 on: September 22, 2021, 10:17:57 AM »
Thanks I never had a issue before with factory ammo, just haven’t found any for over a year and half I have a custom cds dial for that specific ammo not sure if it would throw it off using different ammo with that cds dial .


Sent from my iPhone using Tapatalk

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4515
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Sighting in rifle
« Reply #18 on: September 22, 2021, 10:35:42 AM »
If the velocity data you used for the dials doesnt match collected data from your handloads, you will be off your mark.  If your dials were cut from "box" data from your factory ammo, you may have the same problem, however if its close enough it wont show that much until 500 yards or more.

Ill add, yes, I have had CDS dials and have tested 2 rifles that both had them out to 650 yards.
« Last Edit: September 22, 2021, 10:46:05 AM by buckfvr »

Offline Damnimissed

  • Political & Covid-19 Topics
  • Trade Count: (+9)
  • Longhunter
  • *****
  • Join Date: Dec 2013
  • Posts: 621
  • Location: Salmon, ID
Re: Sighting in rifle
« Reply #19 on: September 22, 2021, 08:55:43 PM »
FWIW, that is an extremely mild load for RUM. I don’t know anyone running under 90gr of Retumbo. I’m pushing 200gr AccuBonds at 3135fps with 92gr of Retumbo with no real pressure.

Offline Mccabe

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jun 2021
  • Posts: 18
  • Location: Goldendale
    • Don’t have one
  • Groups: Ducks unlimited
Re: Sighting in rifle
« Reply #20 on: September 22, 2021, 09:10:14 PM »
I was just going off the Barnes load data it showed 86 grains as max, I called and talked to customer service he did say I can up it a bit just watch pressures . I did try 86 grains It just isn’t grouping like I am at 84 grains.


Sent from my iPhone using Tapatalk

Offline Bushcraft

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1166
  • Location: Olympic Peninsula
  • Groups: NRA, SCI, NSSF, RMEF, RMGA, MDF, WSF, DU, HHC, WWC, WDAC
Re: Sighting in rifle
« Reply #21 on: September 22, 2021, 09:26:55 PM »
No offense intended, but how much experience do you have with handloading?  Everyone starts somewhere. It's good that you are asking questions.  I recommend stopping what you're doing and asking a lot more questions.  ;)
Socialism is the philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery. - Winston Churchill

Work hard. Hunt hard. Lift other hunters up.

*Proud supporter of NRA, NRA-ILA SCI, SCIF, SCI-PAC, NSSF, RMEF, RMGA, MDF, WSF, DU, WWA, HHC, WWC

 


* Advertisement

* Recent Topics

Tree stand for Western Washingtn by Huntnfolk
[Today at 08:05:39 AM]


Range finders & Angle Compensation by DaNewb
[Today at 08:04:21 AM]


KODIAK06 2025 trail cam and personal pics thread by Boss .300 winmag
[Today at 07:53:52 AM]


Pocket Carry by JimmyHoffa
[Today at 07:49:09 AM]


Yard bucks by Boss .300 winmag
[Yesterday at 11:20:39 PM]


Yard babies by Feathernfurr
[Yesterday at 10:04:54 PM]


Seeking recommendations on a new scope by coachg
[Yesterday at 08:10:21 PM]


Sauk Unit Youth Elk Tips by high_hunter
[Yesterday at 08:06:05 PM]


Jupiter Mountain Rayonier Permit- 621 Bull Tag by HntnFsh
[Yesterday at 07:58:22 PM]


MOVED: Seekins Element 7PRC for sale by Bob33
[Yesterday at 06:57:10 PM]


3 pintails by metlhead
[Yesterday at 04:44:03 PM]


1993 Merc issues getting up on plane by Happy Gilmore
[Yesterday at 04:37:55 PM]


A lonely Job... by AL WORRELLS KID
[Yesterday at 03:21:14 PM]


Unit 364 Archery Tag by buglebuster
[Yesterday at 12:16:59 PM]


In the background by zwickeyman
[Yesterday at 12:10:13 PM]


A. Cole Lockback in AEB-L and Micarta by A. Cole
[Yesterday at 09:15:34 AM]


Willapa Hills 1 Bear by hunter399
[Yesterday at 08:24:48 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by Threewolves
[Yesterday at 06:35:57 AM]


Sockeye Numbers by Southpole
[July 03, 2025, 09:02:04 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal