collapse

Advertisement


Author Topic: Sighting in rifle  (Read 5142 times)

Offline blackpowderhunter

  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Apr 2014
  • Posts: 1202
  • Location: Renton
Re: Sighting in rifle
« Reply #15 on: September 22, 2021, 09:09:40 AM »
i'd borrow a chronograph.
not saying your vel. is 2200 fps as calcs would suggest, but its hard to guess around velocity.
some barrels like something more than another, could be a funny batch of powder, whole bunch of stuff.
the weird part is that whatever velocity you're getting, they're grouping nicely  :chuckle: :dunno: :dunno:

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4515
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Sighting in rifle
« Reply #16 on: September 22, 2021, 10:01:29 AM »
If you arent able to collect actual velocity data, you probably arent going to be able to resolve your issue.  In that case you may be well advised to buy a couple boxes of factory ammo for sight in and hunt until you have a chance to resolve the issues.  If the factory ammo does the same thing then you have other problems to resolve.   :twocents:

Offline Mccabe

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jun 2021
  • Posts: 18
  • Location: Goldendale
    • Don’t have one
  • Groups: Ducks unlimited
Re: Sighting in rifle
« Reply #17 on: September 22, 2021, 10:17:57 AM »
Thanks I never had a issue before with factory ammo, just haven’t found any for over a year and half I have a custom cds dial for that specific ammo not sure if it would throw it off using different ammo with that cds dial .


Sent from my iPhone using Tapatalk

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4515
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Sighting in rifle
« Reply #18 on: September 22, 2021, 10:35:42 AM »
If the velocity data you used for the dials doesnt match collected data from your handloads, you will be off your mark.  If your dials were cut from "box" data from your factory ammo, you may have the same problem, however if its close enough it wont show that much until 500 yards or more.

Ill add, yes, I have had CDS dials and have tested 2 rifles that both had them out to 650 yards.
« Last Edit: September 22, 2021, 10:46:05 AM by buckfvr »

Offline Damnimissed

  • Political & Covid-19 Topics
  • Trade Count: (+9)
  • Longhunter
  • *****
  • Join Date: Dec 2013
  • Posts: 624
  • Location: Salmon, ID
Re: Sighting in rifle
« Reply #19 on: September 22, 2021, 08:55:43 PM »
FWIW, that is an extremely mild load for RUM. I don’t know anyone running under 90gr of Retumbo. I’m pushing 200gr AccuBonds at 3135fps with 92gr of Retumbo with no real pressure.

Offline Mccabe

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jun 2021
  • Posts: 18
  • Location: Goldendale
    • Don’t have one
  • Groups: Ducks unlimited
Re: Sighting in rifle
« Reply #20 on: September 22, 2021, 09:10:14 PM »
I was just going off the Barnes load data it showed 86 grains as max, I called and talked to customer service he did say I can up it a bit just watch pressures . I did try 86 grains It just isn’t grouping like I am at 84 grains.


Sent from my iPhone using Tapatalk

Offline Bushcraft

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1170
  • Location: Olympic Peninsula
  • Groups: NRA, SCI, NSSF, RMEF, RMGA, MDF, WSF, DU, HHC, WWC, WDAC
Re: Sighting in rifle
« Reply #21 on: September 22, 2021, 09:26:55 PM »
No offense intended, but how much experience do you have with handloading?  Everyone starts somewhere. It's good that you are asking questions.  I recommend stopping what you're doing and asking a lot more questions.  ;)
Socialism is the philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery. - Winston Churchill

Work hard. Hunt hard. Lift other hunters up.

*Proud supporter of NRA, NRA-ILA SCI, SCIF, SCI-PAC, NSSF, RMEF, RMGA, MDF, WSF, DU, WWA, HHC, WWC

 


* Advertisement

* Recent Topics

49 degrees north late A moose by highside74
[Today at 10:06:22 AM]


Grizzly? by bearhunter99
[Today at 10:05:24 AM]


Drew A Bull Moose Tag - 49 Degrees North A, Late hunt NOV 1st- NOV 30th by blakecarson70
[Today at 09:12:14 AM]


2025 elk success thread!! by Boss .300 winmag
[Today at 07:50:06 AM]


2025 15th Annual Hunting-Washington Christmas Gift Exchange by wadu1
[Today at 06:35:41 AM]


2025 deer, let's see em! by teanawayslayer
[Today at 01:24:21 AM]


Shooting someone else's injured buck - etiquette question by EnglishSetter
[Yesterday at 10:55:36 PM]


2025 blacktail rut thread by Pete112288
[Yesterday at 10:54:40 PM]


2025 Quality Tag Hunt. 💥VIDEO 💥 by DWAT
[Yesterday at 10:05:47 PM]


AMMO 6.5 PRC 143 Gr ELD-X Hornady by dblungshot
[Yesterday at 09:57:11 PM]


Lost Zoleo by N7XW
[Yesterday at 09:23:15 PM]


Panhandle whitetail dates by Jimmy33
[Yesterday at 09:17:38 PM]


Any buck clarification by Kingofthemountain83
[Yesterday at 08:25:13 PM]


Saw 25+ does today. No bucks. Is blacktail rut over? by craigapphunt
[Yesterday at 08:23:28 PM]


Surrounded by elk and this guy walks right up to me by jason stevens
[Yesterday at 08:13:15 PM]


Any MT deer updates? by muleyslayer#1
[Yesterday at 07:55:18 PM]


HUNTNNW 2025 trail cam thread and photos by Rigby416
[Yesterday at 07:28:44 PM]


Idaho Unit 39 wolves by IdeehoT
[Yesterday at 06:44:43 PM]


LINCOLN !! by cryder
[Yesterday at 06:33:14 PM]


Such cool looking animals by pashok23
[Yesterday at 04:07:56 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal