collapse

Advertisement


Author Topic: Pre-season shooting in the Rock Pit  (Read 2011 times)

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Pre-season shooting in the Rock Pit
« on: September 17, 2021, 09:41:35 AM »
Finally!!! the weather here changed enough I could finally get out to do some shooting. We have a have a terribly dry and hot summer, yesterday the temperature drop into the 70's, actually 66* when I left the house and made the drive to the pit.

Well anyway finally grabbed the 45 Knight Super DISC (FT) and all the stuff I needed and headed out. I was really worried because of my late start that someone else might be there and have the pit tied up... but luck was with me nobody...

Nothing really important to report but thought I would provide my shooting attempt.

This was more or less a trip to check the rifle for the upcoming rifle season here in Idaho.  So the trip wasn't to do a lot of shooting just to see if the rifle would hit where it was pointed.

Set up 5 clays on the basalt wall, set up the shooting bench and began shooting! This pic shows a composite of the event.



After this trip I will not be able to blame the rifle if I were to miss.

Keep shooting muzzleloaders - They are a blast!!

Offline JakeLand

  • WA State Trappers Association
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Oct 2011
  • Posts: 4619
  • Location: Wet side
Re: Pre-season shooting in the Rock Pit
« Reply #1 on: September 17, 2021, 10:49:50 AM »
Nice shooting!!  Sing without a sabot how is it pushing it down the barrel?

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Pre-season shooting in the Rock Pit
« Reply #2 on: September 17, 2021, 12:04:08 PM »
Nice shooting!!  Sing without a sabot how is it pushing it down the barrel?

Once you get it through the crown - it really goes down well.  The bullet was originally built for custom ML's using a true 45-70 barrel with deeper grooves.  Most ML's have a shallow groove.

Originally I was resizing the bullet barbs to .454 for loading in a ML but I have since tried just loading the bullet as is. It does take a pretty good thump with my loading block but after that it will go down fairly easily.

This my "Bump Stick"



Keep shooting muzzleloaders - They are a blast!!

 


* Advertisement

* Recent Topics

Bear ID certification by Scruffy
[Yesterday at 11:37:29 PM]


Old account recovery by Rainier10
[Yesterday at 10:33:54 PM]


Best Turkey Recipes by bhammac
[Yesterday at 10:03:29 PM]


2026 turkey season! by Wanttohuntmore
[Yesterday at 09:31:07 PM]


6.5 PRC advice by Bob33
[Yesterday at 09:18:49 PM]


European skull personalized wall state mounts by fire*guy
[Yesterday at 06:20:17 PM]


Turkey Fan/beard Plaques by fire*guy
[Yesterday at 06:11:49 PM]


You Bear Slayers by Kingofthemountain83
[Yesterday at 04:23:17 PM]


Discretion !!! by Kingofthemountain83
[Yesterday at 11:19:59 AM]


WA wolf population increases 17%. by Ironhead
[Yesterday at 10:59:07 AM]


Choose Wisely by b23
[Yesterday at 09:59:56 AM]


Turkey 26' by Ridgeratt
[Yesterday at 09:36:57 AM]


Laser engraving service in western washington by JDHasty
[Yesterday at 07:40:32 AM]


My Daughters first Turkey. by rosscrazyelk
[Yesterday at 07:18:09 AM]


How to edit title by wadu1
[Yesterday at 06:48:41 AM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal