Free: Contests & Raffles.
I have shot Elite bows for years, a few rounds with that bow and then the Synergy and up. You have to have mods for them that match your draw length. You can pick those up on ebay for pretty cheap. But you need to know your draw length first. If you have a shop or Sportsmans nearby that is your best answer. Otherwise it takes a bow press to swap mods.
Determine draw length by standing against a wall. Measure middle finger tip to middle finger tip span. Divide by 2.5 or span -15” and divide by 2. That number should give you a good idea. Like for me my span is 74”. So my number is 29.6” the first way or 29.5” the second method. I could shoot a 29.5” draw mod but I tested the 30” mod and it felt more comfortable.
Elite makes some of the most underrated bows ever. I shoot the Impulse 34 and Spokane Valley Archery had draw mods there for me.
Check this video out!
Let me see if I still have some draw mods, if I have the right ones I’ll send them to you. Give me a couple days though, I’ll have to dig around.
All I could find were 27” draw mods!! Sorry about that!!
I have a couple of draw mods for an E35 that I don't need. Not sure if they will fit your E32 or not. They are the "EN 3" top and bottom. I believe these are for a 30" draw length.