Reloading 30-06......what works for you?

[elkaholic33]

I will add that I loaded for 3 different 06's and found that some like standard primers and some like magnum primers.  My pre64 only likes the magnum primers.  I usually shoot accubonds with IMR 4350.

[MeatMissile]

I’ve used H4895, RL17, RL19, H4350, Big Game, Hunter, H4831. The slow powders were only used on 180gr and 200gr bullets. 

My favorite loads: 
150gr Barnes TTSX, 51gr H4895, Winchester brass, CCI 200 primer, 2930 fps avg
180gr Nosler Partition, 57.5gr H4350, Winchester brass, CCI 200 primer, 2780 fps avg

[birddogdad]

so this is for a hunting Win 70FW -

43gr 3031 WLR  150g SBT 3.30 coal@2650fps  accurate and consistent

38gr 3031 WLR 220 N (H)  3.34 coal @2100 is my other load..

dont mess much with this gun any longer.. lots of others to keep me active

[grundy53]

Thanks for the thread. It reminded me I have an inherited 30-06 I need to work up a load for. I would like to take it out hunting.

Sent from my SM-G991U using Tapatalk

[Hovel Downs]

200 gr. eld-x, 55 grains H4831
My M77 Ruger doesn't like anything under 200 grains.  220 gr Partition with same powder is very accurate, but only to 200 yds.