Material under stove in tent

[Billy74]

Ive been using the zip out floor in my Alaknak for the stove but I’d like to use something like a welding blanket.  What else makes a good base for a wood stove?


Sent from my iPhone using Tapatalk

[full choke]

rectangular metal drip pans that you can get at auto parts stores work well.

[highside74]

rectangular metal drip pans that you can get at auto parts stores work well.

You beat me to it. This is exactly what I use and was going to post.

[KFhunter]

They make silicone mats for this.

Try Colorado cylinder stoves website

[Wolfdog2314]

I also just use one of those metal drip pans under my wood stove in my Kodiak tent.

[milldozer]

A piece of hardie board works well.

[Boss .300 winmag]

What am I missing here? I just set it on the dirt.🤔

[highside74]

What am I missing here? I just set it on the dirt.🤔

I'd say a floor lol

I put down heavy black plastic and outdoor carpet in my big tent

[2MANY]

What am I missing here? I just set it on the dirt.🤔

Remove grass/roots and backfill dirt up sides of stove if a stove that sits on the ground.
So simple even a dirt guy can do it.

[ganghis]

I use a welding blanket in my Kodiak canvas (vinyl floor)

[wadu1]

The back panel off on old dryer worked well for me when I tent camped. I'm cheap and it was free.

[spin05]

rectangular metal drip pans that you can get at auto parts stores work well.

yup this is what we use

[opdinkslayer]

I second the cement backer board suggestion. Doesn’t absorb heat & provides a hard surface for the stove to sit not to mention not taking up any room traveling as the first layer in the back of the truck.

[Boss .300 winmag]

What am I missing here? I just set it on the dirt.🤔

I'd say a floor lol

I put down heavy black plastic and outdoor carpet in my big tent

I put down a tarp, just cut out where the stove goes.😉