collapse

Advertisement


Author Topic: Encore 209x45  (Read 2054 times)

Offline 92xj

  • Trade Count: (+26)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 4024
  • Location: Out of Place
  • Kill 'em
Encore 209x45
« on: January 25, 2023, 08:06:28 AM »
I just received my muzzleloader that I used when I lived/hunted in the south.  I haven't done any muzzleloading hunting or shooting in 15 years, so pretty much starting fresh.

For the folks who shoot 45 cals, where are you buying your supplies; looks like 45 is almost not a thing anymore.
My memory is vague, but I think I remember shooting 3 pellets of 777 behind whatever package of bullets I found at the outdoor store at the time. 
I am assuming there is now something better than the 777 pellets as far as power goes?

Also, after pulling the breach plug, I see that my uncle took zero care of it and there is rust in the hole,  not horrible but not good.  I found a few replacement plugs online, but they all either said out of stock or backordered.  What can I soak the plug in to try and clean it up?

Are the current muzzleloading supplies going through the same thing that reloading for rifles went through last year?

And last, what is the "best" recommended sight?  I will clearly be pulling my 2.5-10 scope off the gun to hunt with here, unless I use it doing rifle season.
"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline Parasite

  • Political & Covid-19 Topics
  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Dec 2018
  • Posts: 551
  • Location: Olympia
Re: Encore 209x45
« Reply #1 on: February 26, 2023, 10:52:59 PM »
Picture of the breech plug?

Offline jackelope

  • Administrator
  • Trade Count: (+29)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50348
  • Location: Duvall, WA
  • Groups: jackelope
Re: Encore 209x45
« Reply #2 on: February 27, 2023, 01:27:19 PM »
I like loose powder. I'm shooting 100 grains of 777 loose powder.  It's easier to sort of customize or dial in a load that your gun will shoot best.

I've got a Williams FP rear peep on my Encore. I need to upgrade the front bead but I got my rifle shooting pretty well. I really like that peep sight.
https://muzzle-loaders.com/collections/all/products/williams-fp-t-c-encore-omega-adjustable-peep-sight-36890

If I was going to change it, I'd probably switch to the western precision sight setup.
https://muzzle-loaders.com/products/williams-western-precision-muzzleloading-sight-set-cva-traditions-t-c-676584
:fire.:

" In today's instant gratification society, more and more pressure revolves around success and the measurement of one's prowess as a hunter by inches on a score chart or field photos produced on social media. Don't fall into the trap. Hunting is-and always will be- about the hunt, the adventure, the views, and time spent with close friends and family. " Ryan Hatfield

My posts, opinions and statements do not represent those of this forum

Offline pickardjw

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Oct 2019
  • Posts: 1775
  • Location: Tacoma, WA
Re: Encore 209x45
« Reply #3 on: February 27, 2023, 01:57:32 PM »
Big fan of the ramped adjustable rear peep sight in Jackelope's second link. I wanted the Williams FP from the first link but they weren't available at the time.

Having an adjustable rear was critical for my Knight. It shot 3 1/2" left at 75 yards with the stock sights, so the rear peep is currently pushed all the way to the right, almost at the end of the adjustment range.

I'd like to put the Williams WGRS globe sight with the fiber optic on the front. But I may have to get a ramped, adjustable front sight to bring that peep back towards center.
https://muzzle-loaders.com/collections/sights/products/williams-western-precision-muzzleloader-globe-sight-w-fiber-optic-insert-front-sight-only-618190

 


* Advertisement

* Recent Topics

Need information on having a gunsmith thread a barrel for thin walled chokes. by Dukalr
[Today at 07:35:33 AM]


Quinault Bear guide/help by teanawayslayer
[Today at 07:21:55 AM]


Also looking for help deciding on a scope by Magnum_Willys
[Today at 07:12:26 AM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by westside bull
[Today at 07:02:10 AM]


Gots me a new/old rockchuck rifle coming by JDHasty
[Yesterday at 10:41:07 PM]


Litefighter tent ? by slowwalker
[Yesterday at 10:25:44 PM]


HUNTNNW 2025 trail cam thread and photos by kodiak06
[Yesterday at 10:22:12 PM]


Looking for Solid 22 LR input by JDHasty
[Yesterday at 10:21:31 PM]


49 Degrees North Early Bull Moose by westdcw
[Yesterday at 09:57:25 PM]


Teanaway bull elk by teanawayslayer
[Yesterday at 05:57:24 PM]


6mm Creedmoor Gauges by pickardjw
[Yesterday at 01:27:28 PM]


Brittany breeders by ghosthunter
[Yesterday at 01:17:23 PM]


Kings by metlhead
[Yesterday at 12:37:26 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by rainshadow1
[Yesterday at 11:46:04 AM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Karl Blanchard
[Yesterday at 10:47:28 AM]


Velvet by MADMAX
[July 11, 2025, 07:35:16 PM]


Advice for a first time Bear spot and stalk? by Crunchy
[July 11, 2025, 06:02:28 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal