collapse

Advertisement


Author Topic: Long Beach clamming tips  (Read 1605 times)

Offline bearhunter99

  • Business Sponsor
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3150
  • Location: Monitor
Long Beach clamming tips
« on: April 06, 2023, 12:45:08 PM »
Anyone have any tips for clamming on Long Beach?  We are in town through Sunday and went out this morning for the dig.  Weather was not great and the tide was only a +0.3 so I don't know if that affected the production?  We tried like hell but only ended up with one clam....  It did not look like the folks around us were doing much better.  We were up on the north end past the lighthouse, it has been years since we were here last when clamming was open but that seemed like the best spot back then..

Any tips on looking for good areas?  We found a few of the "clam holes" but tapping next to them didn't make any "squirt" showing the clams were near the surface.  We have only been clamming a couple of times to maybe we are doing it wrong?  If anyone is going to be around in the morning I would gladly supply a bottle for some assistance.  Thanks
RIP Colockumelk   :salute:

"We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm." – Winston Churchill



Genesis 27:3
Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12955
  • Location: Arlington
Re: Long Beach clamming tips
« Reply #1 on: April 06, 2023, 01:27:39 PM »
Watch other people that are doing well.  Seeing the holes is 99% of the game.  When you see people finding them, look at the same level they are at.  Once you find one, look around as you pull the gun (if you are using one), many times one or more additional clams will show within several feet of the one you are digging.

Offline rainshadow1

  • RainShadow Game Calls & Custom Knives
  • Business Sponsor
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Sep 2007
  • Posts: 3438
  • Location: Selah, WA - Sequim, WA
  • Custom Calls and Knives
    • http://www.facebook.com/pages/RainShadow-Game-Calls-Custom-Knives/133406026689512?ref=hl
    • RainShadow Game Calls & Custom Knives
Re: Long Beach clamming tips
« Reply #2 on: April 06, 2023, 03:13:28 PM »
If you're running a tube, put it over the vent hole and lean SLIGHTLY towards the beach. Plunge, cover the air vent, and pull. Repeat in the same hole if it's deep and you didn't get it.

If you're digging, dig 6" to the surf side of the vent hole. Easiest when you're out far enough to keep things wet. Dig a hole elbow deep 'behind" the clam, big enough to reach into, without it collapsing. If it's wet, the clam will just fall into your hand.

If you see a vent hole ring, it's there. They maintain them with every wave.
- - Steve
View and Purchase/Order Custom Calls!
Cougar Hunters!!! Check out Calling Products and Call-In Stories!
View the Blade Gallery, & Purchase/Order a Custom Knife!
 www.rain-shadow.com

RainShadow Game Calls & Custom Knives on Facebook

Labrador Retrievers - https://rainshadowlabradors.com

Offline CastleRocker

  • Trade Count: (+6)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1020
  • Location: Castle Rock, WA
Re: Long Beach clamming tips
« Reply #3 on: April 06, 2023, 04:01:06 PM »
We started out just north of the "lighthouse" as well.  With the rain, they just weren't showing very well, so we moved to another "Super Secret Spot" south of the test beds, Hahaa!  We got a little bit of a late start, (4 and 6 year old Grandkids), so we didn't get on the beach until around 6:45.  We got a few, not even close to all our limits though.  We'll be put there again in the morning!
Work to live, don't live to work.

You can educate away ignorance, sober up drunkenness, but you can't fix stupid.

Offline GWP

  • Forum Sponsor
  • Trade Count: (+26)
  • Sourdough
  • *****
  • Join Date: Dec 2010
  • Posts: 1754
  • Location: Big Sandy-By Westport
Re: Long Beach clamming tips
« Reply #4 on: April 06, 2023, 11:41:47 PM »
We hit Twin Harbors and had a tough time. Two people by us said it was the hardest they had ever worked to just get a few.
The ones we got were deep. Full depth with the tube, look in the hole and we could see it was there, then it is going nearly shoulder deep to dig them out grab them.
Cuterebra are NOT cute!

 


* Advertisement

* Recent Topics

Sauk Unit Youth Elk Tips by Kales15
[Today at 02:10:11 PM]


1993 Merc issues getting up on plane by Threewolves
[Today at 01:11:29 PM]


3 pintails by metlhead
[Today at 12:35:03 PM]


Unit 364 Archery Tag by buglebuster
[Today at 12:16:59 PM]


In the background by zwickeyman
[Today at 12:10:13 PM]


A. Cole Lockback in AEB-L and Micarta by A. Cole
[Today at 09:15:34 AM]


Willapa Hills 1 Bear by hunter399
[Today at 08:24:48 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by Threewolves
[Today at 06:35:57 AM]


Sockeye Numbers by Southpole
[Yesterday at 09:02:04 PM]


Selkirk bull moose. by moose40
[Yesterday at 05:42:19 PM]


North Peninsula Salmon Fishing by Buckhunter24
[Yesterday at 12:43:12 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal