collapse

Advertisement


Author Topic: Archery point of aim  (Read 8542 times)

Offline jrebel

  • Non-Hunting Topics
  • Trade Count: (+25)
  • Explorer
  • ******
  • Join Date: Feb 2008
  • Posts: 11503
  • Location: East Wenatchee
Re: Archery point of aim
« Reply #15 on: August 15, 2023, 06:56:46 PM »
I always hold high…..but use both pins to know where my impact should be….if that makes sense.

I have read, but never had to try, the trick when shooting through a window between you and the target where you are unsure if it will clear. If the target is at 50, range the window and if it’s 30 yards, when you aim and put your 50 pin on the target, if the 30 pin is also clear of the window you are good.

Yes same concept.  It allows me to see where impact will be while also allowing me to identify a finite aiming point.  Aim small mid small. 

In all honesty, I only pay this close attention beyond 50 yards.  Anything less is just an easy shot with between ranges. 

Offline Fullabull

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2007
  • Posts: 791
Re: Archery point of aim
« Reply #16 on: August 15, 2023, 07:49:17 PM »
Depends on what you are hunting. I only hunt Elk with a bow which is the reason i changed to a 70lb bow and a single pin. At 60lbs I had to deal with to much of a gap on where my shots hit. At 70lbs I know if i set my pin at 35 yards or so I'm going to hit the kill zone out to 40 yards or so if I just aim at center of chest. Anything beyond that I know I'm going to mostly have time to adjust my pin.

Offline Karl Blanchard

  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Aug 2008
  • Posts: 10657
  • Location: Selah, WA
  • Jonathan_S hunting apparel prostaff
  • Groups: Sitka Gear Fan Boy for LIFE
Re: Archery point of aim
« Reply #17 on: August 15, 2023, 07:52:37 PM »
I'm a splitter
It is foolish and wrong to mourn these men.  Rather, we should thank god that such men lived.  -General George S. Patton

Aaron's Profile:  http://hunting-washington.com/smf/index.php?action=profile;u=2875
Aaron's Posts:  http://hunting-washington.com/smf/index.php?action=profile;area=showposts;u=2875
Aaron's Facebook:  https://www.facebook.com/aaron.blanchard.94

Offline Timberstalker

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Apr 2008
  • Posts: 9282
  • Location: Tri-Cities
  • Just one more ridge
Re: Archery point of aim
« Reply #18 on: August 15, 2023, 08:21:23 PM »
Dial it and send it. Single pin shooter here.
If you aint hunting, you aint livin'

Offline carlyoungs

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Apr 2012
  • Posts: 1153
  • Location: Lynnwood
Re: Archery point of aim
« Reply #19 on: August 15, 2023, 09:22:15 PM »
I always aim high with my pins on in betweeners. If it is 35 I use my 30 yard pin a little high.  I've tried doing it the other way and I am not as accurate as aiming high instead of low.

Offline blackveltbowhunter

  • Non-Hunting Topics
  • Trade Count: (+9)
  • Frontiersman
  • *****
  • Join Date: Oct 2009
  • Posts: 4130
  • BLAM
Re: Archery point of aim
« Reply #20 on: August 15, 2023, 09:34:01 PM »
For game I hold hot up to 4 yards, and low for 5 and up. Its easier for me to hold low and let the pin float underneath the intended point of impact. Gap shooting has screwed me in low light, is not the fastest target aquisition for me,  and i only feel really accurate with it when using a sight with a wire. So it is my least often used method. This is with with a 3 pin slider out to 45. I Dial a pin past that. With the speed window i setup for, it keeps the gaps fairly close so yardage errors are pretty forgiving. If only hunting elk i could get away with a 2 pin setup but the 30 pin is handy for smaller vital zones.

Offline NOCK NOCK

  • Timberdog Slabs
  • Business Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jan 2013
  • Posts: 6843
  • Location: E. Wenatchee
  • Timberdog Live Edge Slabs
    • https://www.facebook.com/profile.php?id=100063502962432
    • Timberdogslabs.com
Re: Archery point of aim
« Reply #21 on: August 16, 2023, 05:21:32 PM »
I only have 3 pins, 20-40-60 less confusion in a hurry. Split the pins for odd yardage, 30-50.

Of course that's all dependent on a level shot, steep up or down changes everything.
Has worked well for me for 30 years!
Live edge Slab woods, Log Furniture, Beds, Dressers, Tables, Chairs, Custom signs, Décor, Cedar fencing w/artwork cutting. Supplies
https://www.facebook.com/profile.php?id=100063502962432

 


* Advertisement

* Recent Topics

2024 Quality Buck coming home by Pete112288
[Yesterday at 11:01:56 PM]


Boys coho catch fall ‘25 by PsoasHunter
[Yesterday at 10:25:39 PM]


What's flatbed pickup life like? by slavenoid
[Yesterday at 10:23:11 PM]


Idaho Non-Res draw results by highside74
[Yesterday at 10:01:46 PM]


6.5 PRC advice by jrebel
[Yesterday at 10:00:04 PM]


Bobcat Scent Lures on the Westside by Kit Carson
[Yesterday at 09:59:20 PM]


Returned Idaho tags by 10thmountainarcher
[Yesterday at 09:53:28 PM]


Daughter's first hunt by Dan-o
[Yesterday at 09:44:02 PM]


Late season in gods Country My big buck by castie2504
[Yesterday at 09:11:56 PM]


What are some good 12 ga factory loads for predators? by Special T
[Yesterday at 08:23:32 PM]


Any Marlin old lever action experts or collectors on here? by JDHasty
[Yesterday at 07:02:31 PM]


Best bird taxidermist in washington state? by huntindoc
[Yesterday at 05:32:27 PM]


Called in my first bobcat! by brokentrail
[Yesterday at 11:13:17 AM]


Stick with the 50's by Ghost Hunter
[Yesterday at 10:46:38 AM]


Drew Moose Tag by highside74
[Yesterday at 09:25:30 AM]


A cougar tries to steal my cat by redi
[Yesterday at 08:31:26 AM]


LINCOLN !! by pd
[January 20, 2026, 10:20:02 PM]


Are all case trimmers created equal? by HighlandLofts
[January 20, 2026, 07:00:40 PM]


Very Little Trapping Posts by Naches Sportsman
[January 20, 2026, 06:52:01 PM]


Wildlife Obsession Duvall WA Taxidermy Closing its doors by RileyH
[January 20, 2026, 06:08:45 PM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal