Laser Bore Sighters

[Screaminreelz]

I'm thinking about getting one to save a few bucks on shells. Have any of you ever used them and if so what are the pros and cons? Also best brands seem to be Sightmark and NC Star true or false?

[AWS]

I have one that I got as a frebee with an order from Cabelas and I use it to set up scopes on rifles without removable bolts(levers, semi-autos, pumps), it works great.  On bolt actions it's easier to just pull the bolt and bore sight it.

AWS

[blindpig]

I have used one and it works great.

[ICEMAN]

I have used mine a few times, well worth the investment on new guns/new scopes... Paid for itself on a new 300 ultramag... that ammo ain't cheap!

[sisu]

I got a question on those laser bore sights. Which ones do you guys own? I tried one that an acquaintance owns and it was off by 6 inches after he sighted it in and I went to the range. I was not very impressed with it, but I have to add this, he was not well versed in it's use and kept fumbling around with the thing and my rifle.
Anyway any suggestions on which one to buy or how much money is enough to spend on it will be gladly accepted.

[AWS]

I would never expect a beam of light to have the same trajectory of a bullet and that it was only 6" off sounds like it's doing a very good job of getting the rifle on the paper to be fine tuned by shooting.

AWS

[jackelope]

6" off isn't too bad a bore sight job...seems that is a pretty good job to me.
it's for bore sighting, not for zero-ing.
i have one but honestly have never used it...can't remember the brand name...might be branded with cabela's name on it and it's green.

[AWS]

Jackalope that's the same one that I have.

AWS

[ICEMAN]

I would never expect a beam of light to have the same trajectory of a bullet and that it was only 6" off sounds like it's doing a very good job of getting the rifle on the paper to be fine tuned by shooting.

AWS

Nothing is designed to have the same trajectory as a bullet, rather, the beam represents the point of impact at a known distance. IE: Your bullet will travel thru your scopes line of sight twice, once on its way up, once on its way down.... Since my rifle is sighted in at 250yards for point of impact, then I can either allow the lazer to point where that impact is a 250, and adjust the scope crosshairs to that spot. But, since 250 is a long way for most lazers to be visible in daylight (atleast the ones I have used...) I prefer to use 100yards or less to anticipate where the round should be traveling. This can be done at home prior to range time, and is quite simple at the range.

[kitsap]

If you use a bore sighter to get the bullet impact within 6 inches at a target (100 yards) you have very satisfactory results.  One of the primary cautions is to be sure and remove any part of the device you place in the end of the bore before you fire at the target.     You might laugh, but more than one gun has been ruined by this short mental lapse..........  It is also quite hard on the bore sighter. 

[Jekemi]

A laser beam is by definition, straight. The more powerful the laser the brighter and straighter the beam of collumnaited light - which is what laser light is. Powerful lasers have been beamed to the moon and reflected off a tiny mirror left there by astronauts, a distance of 500,000 miles there and back, to nearly the exact same spot as the laser originated.

It stands to reason that, even a low-powered laser, within 100 yards, will give you a rough idea as to the relationship between the cross hairs of your scope and your bullet impact on a paper target. At 100 yards a low-powered red laser will appear as large as a softball. If your scope cross hairs are accurately alligned with the target center you should be pretty close to on-target when you fire your bullet.

A higher powered green laser (more expensive) will appear as small as a golf ball and a little brighter. This is a more accurate way to sight in a scope but the low powered lasers work pretty well. You can get one for $30 to $90 dollars. The green lasers are around $200 or more.

[jackelope]

the directions in the package tell you to use this device at a range of 25 yards.

[ICEMAN]

Dave Stiles....my elcheapo red "stick in the end of the barrel" laser puts out a neat tiny dot at 100 yards, you just have a hard time discerning it in bright light, once you locate it, it is easy to see, just hard to find it is so small... It is not spreading out as suggested. I have yet to see any laser sight, laser bore sighter, laser pen pointer or construction laser do that.... 

[bearpaw]

I have never started out shooting at 100yds, I always shoot at 50 first.

If you guys have bolt actions, pull your bolt, set your rifle up solidly pointing toward the target. Look down the bore and center the target. Then raise up without bumping your gun and look through the scope, then adjust as needed and repeat until it appears deadon. Almost everytime I have been within 5 inches or less with the first shot by doing this.

I have a whole slew of laser cartidges that I should put in the classified.

[Ray]

Never used one in my life.