collapse

Advertisement


Author Topic: TC Hawkin sight  (Read 2395 times)

Online Threewolves

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Apr 2008
  • Posts: 990
  • Location: North West, USA
  • USA (R)
  • Groups: VFW, NRA
TC Hawkin sight
« on: July 11, 2024, 11:30:52 AM »
I am having an issue with the original back sight on my  late 70 TC Hawkin. It wants to stay to the right. The spring pulls it that way.

Here's a couple of pictures,
I look at a parts diagram, seems I have all parts

Sent from my SM-A426U using Tapatalk

There are only so many sunrises left.

Online Threewolves

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Apr 2008
  • Posts: 990
  • Location: North West, USA
  • USA (R)
  • Groups: VFW, NRA
Re: TC Hawkin sight
« Reply #1 on: July 11, 2024, 11:43:33 AM »
I can push it the left and it springs back to the right. I can move the adjustment screw left to right with no change. The actual sight is not stripped. The spring pulls it to the right.

I was wondering if the right side where the adjustment screw goes in is supposed to be threaded, but it doesn't seem so. Mine  is smooth.

Have not shot it in years. I noticed last week at the range. I put a thick piece of grass between the sight and right side to bring it back to the center.

What  am I missing or doing incorrectly.
Sent from my SM-A426U using Tapatalk
There are only so many sunrises left.

Online Dan-o

  • Global Moderator
  • Trade Count: (+30)
  • Explorer
  • *****
  • Join Date: Jul 2010
  • Posts: 18125
Re: TC Hawkin sight
« Reply #2 on: July 11, 2024, 01:52:59 PM »
Shot in the dark here, and if this is really stupid, I apologize in advance.

Looking at the first pic, is the spring in the right location?

It seems like if the spring was "internal" it would push the right direction and you could adjust it with the screw.
So I guess I'm wondering if you have all the right parts, but not in the right order????

DOES THIS WORK:
* Partially install screw
* Install spring
* Install dove tail sight
* Fully install screw
* Use screw to adjust windage
Member:   Yakstrakgutp (or whatever we are)
I love the BFRO!!!
I wonder how many people will touch their nose to their screen trying to read this...

Online Threewolves

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Apr 2008
  • Posts: 990
  • Location: North West, USA
  • USA (R)
  • Groups: VFW, NRA
Re: TC Hawkin sight
« Reply #3 on: July 11, 2024, 03:05:17 PM »
Dan-o, Thanks for the reply, not stupid at all.

I think i did what you are asking. In the last picture I put the spring to the inside. This didn't work out because the thickness of the spring won't let the adjustment screw move the sight any further to the right. The spring is compressed and the sight is in the middle and won't go any further to the right. 

In the first picture the spring is installed in what looks to be the correct position. On the right side of the sight where the adjustment screw goes in the "hole" is big enough to accommodate the spring.

As mentioned in my above posts, I was thinking that right side of the sight should be threaded, but it is not,  mine is smooth inside like it never was, but that is another one of my WAG's. Anyone with a TC who could verify that? The second picture shows me pushing the sight to the left with my finger.  The parts diagram just shows those parts in picture number three.

I keep thinking it is something simple, that I am overlooking. That, and I am wondering I never noticed that before.

Thanks for replying,



   

There are only so many sunrises left.

Offline Ricochet

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2009
  • Posts: 891
  • Location: Oregon
Re: TC Hawkin sight
« Reply #4 on: July 11, 2024, 03:20:26 PM »
Looking at one of my old TC Renegades, the spring is around the elevation adjustment screw, pushing the sight up. I see no spring associated with the windage adjustment. Without taking the sight apart, the windage adjustment screw seems to be held in place by a keeper of some kind, hence the groove on the end opposite the slotted head. The windage adjustment screw shouldn't move in or out, the sight itself moves on the threads as the screw is rotated but the screw itself should be held in place somehow, allowed to rotate but not move in or out.
« Last Edit: July 11, 2024, 03:42:04 PM by Ricochet »
It is not my duty to validate your delusions.

"It is no measure of health to be well adjusted to a profoundly sick society."-Jiddu Krishnamurti.

Offline wadu1

  • Grumpy
  • Global Moderator
  • Trade Count: (+30)
  • Old Salt
  • *****
  • Join Date: Sep 2008
  • Posts: 7273
  • Location: Tacoma
  • RMEF, DU, NRA, PFE, NWTF
Re: TC Hawkin sight
« Reply #5 on: July 11, 2024, 03:23:15 PM »
Just looked at my Thompson, the sights are different. The windage screw is fixed a detent on the screw head side and a small drift pin on the other.
"a fronte praecipitium a tergo lupi"

Online Threewolves

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Apr 2008
  • Posts: 990
  • Location: North West, USA
  • USA (R)
  • Groups: VFW, NRA
Re: TC Hawkin sight
« Reply #6 on: July 11, 2024, 03:31:19 PM »
Looking at one of my old TC Renegades, the spring is around the elevation screw, pushing the sight up. I see no spring associated with the windage adjustment.

Copy, my elevation also has spring. When I remove the spring from the windage, the whole sight is loose and slops left or right. Different rear sight I guess. Thanks for the reply.
There are only so many sunrises left.

Offline storyteller

  • Forum Sponsor
  • Trade Count: (+14)
  • Scout
  • *****
  • Join Date: Jun 2014
  • Posts: 314
  • Location: Marysville
  • Groups: NRA, DU
Re: TC Hawkin sight
« Reply #7 on: July 11, 2024, 03:46:02 PM »
here is a website that carries original stuff, picture of the sight, you might be able to compare some to see if  it helps

https://cfnparts.com//product/Rear-Sight-Assembly-1st-Variation-45-amp;-50-Caliber-Rifles-Only-Original-Hawken-Flintlock,-Percussion-amp;-Kit-See-Serial-Chart?path=438

Offline wadu1

  • Grumpy
  • Global Moderator
  • Trade Count: (+30)
  • Old Salt
  • *****
  • Join Date: Sep 2008
  • Posts: 7273
  • Location: Tacoma
  • RMEF, DU, NRA, PFE, NWTF
Re: TC Hawkin sight
« Reply #8 on: July 11, 2024, 03:49:21 PM »
Have you tried putting the spring on the left side? I'm thinking the spring is used for tension on the sight. I would be looking for wear marks from the spring. It also looks like the screw retaining clip is missing (C clip or Hair pin), it would not affect the sight.
"a fronte praecipitium a tergo lupi"

Online Threewolves

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Apr 2008
  • Posts: 990
  • Location: North West, USA
  • USA (R)
  • Groups: VFW, NRA
Re: TC Hawkin sight
« Reply #9 on: July 11, 2024, 03:56:04 PM »
Wadu1,

You just solved the mystery. Mine adjustment screw does have an indent for a c-clip. I just don't have the clip. I can hold it with my fingernail and the sight moves left and right like it is supposed to.

Now. Does anyone know where I can get one of those miniature clips? Or any other method to retain that end if the adjustment screw.I have never even seen one that small on a carburetor.

Big thanks  to wadu1

Sent from my SM-A426U using Tapatalk

There are only so many sunrises left.

Offline ArcherJack

  • Trade Count: (+1)
  • Pilgrim
  • *
  • Join Date: Jun 2019
  • Posts: 12
  • Location: Snohomish
  • Groups: NRA
Re: TC Hawkin sight
« Reply #10 on: July 11, 2024, 03:57:59 PM »
I would ask Skinner Sights.  They are pretty good.  Just my 2 cents.

Offline wadu1

  • Grumpy
  • Global Moderator
  • Trade Count: (+30)
  • Old Salt
  • *****
  • Join Date: Sep 2008
  • Posts: 7273
  • Location: Tacoma
  • RMEF, DU, NRA, PFE, NWTF
Re: TC Hawkin sight
« Reply #11 on: July 11, 2024, 03:58:22 PM »
I've gotten small replacements C clips at ACE Hardware.
"a fronte praecipitium a tergo lupi"

Online Threewolves

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Apr 2008
  • Posts: 990
  • Location: North West, USA
  • USA (R)
  • Groups: VFW, NRA
Re: TC Hawkin sight
« Reply #12 on: July 11, 2024, 04:02:35 PM »
wadu1

You are the MAN!

I will check out ace. Thanks
There are only so many sunrises left.

Offline wadu1

  • Grumpy
  • Global Moderator
  • Trade Count: (+30)
  • Old Salt
  • *****
  • Join Date: Sep 2008
  • Posts: 7273
  • Location: Tacoma
  • RMEF, DU, NRA, PFE, NWTF
Re: TC Hawkin sight
« Reply #13 on: July 11, 2024, 04:07:54 PM »
wadu1

You are the MAN!

I will check out ace. Thanks

Just take the screw with you and do a fit check and get two or three. Don't ask me how I know.  :chuckle:
"a fronte praecipitium a tergo lupi"

Online Dan-o

  • Global Moderator
  • Trade Count: (+30)
  • Explorer
  • *****
  • Join Date: Jul 2010
  • Posts: 18125
Re: TC Hawkin sight
« Reply #14 on: July 11, 2024, 04:22:48 PM »
WADU for the win.
Member:   Yakstrakgutp (or whatever we are)
I love the BFRO!!!
I wonder how many people will touch their nose to their screen trying to read this...

 


* Advertisement

* Recent Topics

AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by redi
[Today at 03:54:29 PM]


Looking for Solid 22 LR input by EnglishSetter
[Today at 03:13:54 PM]


WSTA 2025 Summer Rendezvous Agenda by Humptulips
[Today at 03:09:35 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by rainshadow1
[Today at 03:01:42 PM]


2025 Montana alternate list by JBar
[Today at 02:20:40 PM]


Rotator Cuff repair X 2 advice needed by Wood2Sawdust
[Today at 01:36:26 PM]


Rock creek gone? Next? by JBar
[Today at 01:00:56 PM]


Archery elk gear, 2025. by pcveen
[Today at 09:35:38 AM]


2025 Canning by blackpowderhunter
[Today at 07:19:25 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal